- DSpace Home
- →
- Fakülteler / Faculties
- →
- Mühendislik Fakültesi
- →
- Recent submissions
JavaScript is disabled for your browser. Some features of this site may not work without it.
Mühendislik Fakültesi: Recent submissions
Now showing items 261-280 of 2863
-
(TAYLOR & FRANCIS INC, 2010)In this work, a bronze matrix (90 wt% Cu + 10 wt% Sn) was reinforced with SiC and graphite particulates using mechanical alloying and a subsequent current sintering technique. The mechanically ball-milled bronze hybrid ...
-
(TAYLOR & FRANCIS INC, 2010)Surface modification of AISI 4140 steel has been carried out by using electrolytic plasma thermocyclic treatment (EPTT). Cyclic voltage between 320 and 250 for stipulated period of 1, 2, 3, 4 s and 2, 3, 4, 5 s, respectively, ...
-
(SAGE PUBLICATIONS LTD, 2010)In this study, the performance of boric acid (H3BO3)-filled polyamide composites were studied and evaluated at dry-sliding friction conditions. Wear tests were carried out using configuration of composite pin on a rotating ...
-
(TAYLOR & FRANCIS INC, 2010)In this work, a bronze matrix (90 wt% Cu + 10 wt% Sn) was reinforced with SiC and graphite particulates using mechanical alloying and a subsequent current sintering technique. The mechanically ball-milled bronze hybrid ...
-
(TRANS TECH PUBLICATIONS LTD, 2010)Glass fiber reinforced polymer (GRP) and needle reinforced polymer (NRP) composites have been used to produce a new kind of thin cross section liner for rehabilitation of in ground sewer pipes. The liner made from resin ...
-
(SAGE PUBLICATIONS LTD, 2010)The interactions between basalt chosen as a reinforcement material and low-density polyethylene ( LDPE) chosen as a matrix material in polymer matrix composite (PMC) were investigated in this study. A variety of mechanical ...
-
(TURKISH CHAMBER CIVIL ENGINEERS, 2010)LDPE Matrix SiO2 Filled Composite Building Materials Production and characterization of silicon dioxide (SiO2) filled low density polyethylene (LDPE) matrix composite building materials are the aim of this study. Particle ...
-
(ELSEVIER SCIENCE BV, 2011)Tin oxide thin films were grown by atmospheric pressure chemical vapor deposition (APCVD) on glass substrates at temperatures of 400, 500 and 600 C with various deposition times from 15 to 60 min with 15 min time intervals. ...
-
(ELSEVIER SCIENCE SA, 2011)In this study, the effect of titanium and chromium (0, 0.1, 0.2, 0.3, and 0.4 wt%) on the microstructure, mechanical and wear properties of a magnesium-based alloy (Mg-Al 6 wt%) were investigated. The alloys were produced ...
-
(ELSEVIER SCI LTD, 2011)In this study, mixing rates, fiber content and pre-setting pressure of reactive powder concrete (RPC) were examined. Mixing ratios were determined by different mixing techniques in literature using material characteristics ...
-
(SPRINGER, 2011)In the present study, structural characterization and kinetics of nitro-niobized AISI 1010, AISI D2, and AISI M2 steels by thermo-reactive deposition technique in the powder mixture consisting of ferro-niobium, ammonium ...
-
(ELSEVIER SCIENCE SA, 2011)Plasma sprayed thermal barrier coatings (TBCs) are applied to gas turbine components for providing thermal insulation and oxidation resistance. The TBC systems currently in use on superalloy substates typically consists ...
-
(ELSEVIER SCIENCE SA, 2011)In this study, the effect of silver (0, 0.2, 0.5, and 1 wt.%) on the microstructure and mechanical properties of a magnesium-based alloy (Mg-Al 6 wt.%-Sn 1 wt.%-Mn 0.3 wt.%-Ti 0.3 wt.%) were investigated. The alloys were ...
-
(INDERSCIENCE ENTERPRISES LTD, 2011)Reinforced metal matrix composite (MMC) hard coatings which are produced by thermal spray processes are used for various automotive parts such as piston rings and cylinder liners. Generally, WC-CoCr coatings are deposited ...
-
(ELSEVIER SCIENCE INC, 2011)This paper reports the experimental findings on the development of the premixed elemental Al5Cu and Al5Cu0.5Mg powder metallurgy alloys. Aluminum powder was mixed with copper and magnesium powders in a macro- and a micro-level ...
-
(MANEY PUBLISHING, 2011)The carbothermal reduction of mechanically activated chromite with graphite under an argon atmosphere was investigated at temperatures between 1100 and 1400 degrees C and the effects of the mechanical activation on chromite ...
-
(PERGAMON-ELSEVIER SCIENCE LTD, 2011)The present study reports on kinetics of bonded AISI M2 high speed steel. Boronizing thermochemical treatment was carried out in a solid medium consisting of EKabor powders at 850 degrees C, 900 degrees C and 950 degrees ...
-
(WILEY-BLACKWELL, 2011)Grain growth kinetics of the glassceramics produced from fly ash of Seyitomer power plant in Turkey has been investigated. In this process, fly ash was melted and casted as glass. Produced glass materials were heat treated ...
-
(INST ZA KOVINSKE MATERIALE I IN TEHNOLOGIE, 2011)Zn, Al and Zn/15Al coatings can be produced in optimum conditions by the twin wire arc (TWEA) spraying technique. The coatings are used for corrosion protection in a variety of industrial applications. In this study, the ...
Now showing items 261-280 of 2863
DSpace@Sakarya by Sakarya University Institutional Repository is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 4.0 Unported License..
DSpace@Sakarya:
