Browsing Mühendislik Fakültesi by Title

Now showing items 1-19 of 2863

23 October 2011 Van, Eastern Anatolia, earthquake (M (W) 7.1) and seismotectonics of Lake Van area

Utkucu, Murat (SPRINGER, 2013)

The 23 October 2011 Van earthquake took place in the NE part of Lake Van area, surprisingly on a fault (the Van fault) that is not present in the current active fault map of Turkey. However, occurrence of such a large ...
2H-MoS(2)as an Artificial Solid Electrolyte Interface in All-Solid-State Lithium-Sulfur Batteries

Kızılaslan, Abdulkadir; Çetinkaya, Tuğrul; Akbulut, Hatem (WILEY, 2020)

All-solid-state lithium-ion batteries are considered the next-generation energy storage systems. However, certain problems arise from the degradation of anode-electrolyte interface hindering their use especially when lithium ...
3-D NUMERICAL INVESTIGATION AND OPTIMIZATION OF CENTRIFUGAL SLURRY PUMP USING COMPUTATIONAL FLUID DYNAMICS

Mehmet Salih Cellek; Engin, Tahsin (TURKISH SOC THERMAL SCIENCES TECHNOLOGY, 2016)

Energy conversion applications are directly affected through the employment of turbomachines and their efficiencies. Energy importance and wide-spread application of turbomachines, make it crucial to optimize their components. ...
3D gravity modeling of Buyuk Menderes basin in Western Anatolia using parabolic density function

Işık, Mahir (PERGAMON-ELSEVIER SCIENCE LTD, 2009)

A method to model 3D sedimentary basins with parabolic density contrast is applied to Buyuk Menderes basin in Western Anatolia. The measured gravity fields, reduced to a horizontal plane, are assumed to be available at ...
3D porous collagen/functionalized multiwalled carbon nanotube/chitosan/hydroxyapatite composite scaffolds for bone tissue engineering

Türk, Serbülent; Altınsoy, İbrahim; Çelebi Efe, Gözde Fatma; İpek, Mümtaz; Özacar, Mahmut; Bindal, Cuma (ELSEVIER SCIENCE BV, 2018)

In this study, we describe new collagen/functionalized multiwalled carbon nanotube/chitosan/hydroxyapatite (Col/f-MWCNT/CS/HA) composite scaffolds which were fabricated by freezing ( - 40 degrees C at 0.9 degrees C/min) ...
3D porous collagen/functionalized multiwalled carbon nanotube/chitosan/hydroxyapatite composite scaffolds for bone tissue engineering

Türk, Serbülent; Altınsoy, İbrahim; Çelebi Efe, Gözde Fatma; İpek, Mümtaz; Özacar, Mahmut; Bindal, Cuma (ELSEVIER SCIENCE BV, 2018)

In this study, we describe new collagen/functionalized multiwalled carbon nanotube/chitosan/hydroxyapatite (Col/f-MWCNT/CS/HA) composite scaffolds which were fabricated by freezing ( - 40 degrees C at 0.9 degrees C/min) ...
8 January 2013 Mw=5.7 North Aegean Sea earthquake and its seismotectonic significance

Akin Kurcer; Yalçın, Hilal; Gülen, Levent; Dogan Kalafat (TAYLOR & FRANCIS LTD, 2015)

The deformation of the North Aegean Sea is mainly controlled by the westernmost segments of North Anatolian Fault System. On 8 January 2013, a moderate earthquake (Mw=5.7) occurred in the North Aegean Sea. A series of ...
A comparative study of artificial neural network models for the prediction of Cd removal efficiency of polymer inclusion membranes

Eren, Beytullah; Muhammad Yaqub; Eyüpoğlu, Volkan (DESALINATION PUBL, 2019)

In this study, three different artificial neural network (ANN) including feed forward back-propagation (FFBPNN), recurrent neural network (RNN), and generalized regression neural network (GRNN) were proposed to estimate ...
A comparative study of borided pure niobium, tungsten and chromium

Özbek, İbrahim; Bindal, Cuma (PERGAMON-ELSEVIER SCIENCE LTD, 2006)

Pure niobium (Nb), tungsten (W) and chromium (Cr) were boronized at 940 degrees C for 2, 4 and 8h. The borided samples were characterized by X-ray diffraction, Scanning electron microscope and microhardness tests. Tribological ...
A comparative study of borided pure niobium, tungsten and chromium

Bindal, Cuma; Özbek, İbrahim (2006)
A comparison of As-cast and heat treated properties in short fiber reinforced Al-Si piston alloys

Akbulut, Hatem; Durman, Mehmet; Yılmaz, Fevzi (PERGAMON-ELSEVIER SCIENCE LTD, 1997)
A comparison of borided AISI 316L and AISI 304 stainless steels

Özbek, İbrahim; Bindal, Cuma (2002)
A comparison of borides formed on AISI 1040 and AISI P20 steels

İpek, Mediha; Çelebi Efe, Gözde Fatma; Özdemir, Özkan; Bindal, Cuma; Cömert, Hüseyin (ELSEVIER SCI LTD, 2007)

In this study, some properties of borides formed on the AISI 1040 and AISI P20 steel substrates were investigated. Boronizing was performed at 800, 875, and 950 degrees C for 2, 4, 6, and 8 h by using Ekabor 2 powders. The ...
A comparison of pretreatments on hydroxyapatite formation on Ti by biomimetic method

Türk, Serbülent; Altınsoy, İbrahim; Çelebi Efe, Gözde Fatma; İpek, Mediha; Özacar, Mahmut; Bindal, Cuma (SPRINGER, 2018)

In this study, hydroxyapatite coating on titanium material substrate was successfully performed by using biomimetic method. Titanium plates immersed in 1.5 SBF at pH 7.4 and 37 degrees C were analyzed at the end of the ...
A comparison of pretreatments on hydroxyapatite formation on Ti by biomimetic method

Türk, Serbülent; Altınsoy, İbrahim; Çelebi Efe, Gözde Fatma; İpek, Mediha; Özacar, Mahmut; Bindal, Cuma (SPRINGER, 2018)

In this study, hydroxyapatite coating on titanium material substrate was successfully performed by using biomimetic method. Titanium plates immersed in 1.5 SBF at pH 7.4 and 37 degrees C were analyzed at the end of the ...
A computer simulation of four-point bending fatigue of a rear axle assembly

Fırat, Mehmet (PERGAMON-ELSEVIER SCIENCE LTD, 2011)

The bending fatigue test of a rear axle assembly is simulated by using a FE-integrated fatigue analysis methodology. The presented technique is based on local stress-strain approach in conjunction with two critical plane ...
A conceptual framework for cloud-based integration of Virtual laboratories as a multi-agent system approach

Erdem, Mehmet Bilgehan; Kiraz, Alper; Eski, Hüseyin; Çiftçi, Özgür; Kubat, Cemalettin (PERGAMON-ELSEVIER SCIENCE LTD, 2016)

With the rapid development in information technologies, numerous Virtual laboratory (VL) studies are being conducted in various fields such as material science, computer science, chemistry and education. While the number ...
A Decision Support System for Railway Track Maintenance and Renewal Management

Güler, Hakan (2013)
A different method for producing a flexible LiMn2O4/MWCNT composite electrode for lithium ion batteries

Çetinkaya, Tuğrul; Akbulut Uludağ, Ahsen; Güler, Mehmet Oğuz; Akbulut, Hatem (VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS, 2014)

A flexible lithium manganese oxide (LiMn2O4)/multi-wall carbon nanotube (MWCNT) composite electrode was produced by casting a slurry-containing powdered LiMn2O4 on a previously prepared MWCNT paper. The structure of this ...