Copper matrix composites reinforced with 1 wt.%, 2 wt.%, 3 wt.% and 5 wt.% SiC particles were fabricated by powder metallurgy method. Cu and Cu-SiC powder mixtures were compacted with a compressive force of 280MPa and ...

In this study, slurry erosion behaviors of basalt filled low density polyethylene composites were investigated. Pure low density polyethylene and four different compositions of the composites 10 wt.%, 30 wt.%, 50 wt.% and ...

The amount of retained austenite in the quenched cold work tool steel sample is 17.7%, in the condition of sub-zero heat treated and double tempered samples following by quenching is 1.9% determined by XRD analysis. The ...

Diclofop-methyl (DM) is a chlorophenoxy derivative used in large quantities for the control of annual grasses in grain and vegetable crops. In this study, the genotoxic effects of DM were investigated by measuring chromosomal ...

Zn and Zn/Al 85/15 coatings are produced at optimum conditions by twin wire electric arc (TWEA) spraying technique and are used in various industrial applications to improve corrosion protection. As an alternative for Zn ...

This study reports some properties of copper matrix composite reinforced with silicon carbide at ratios of 1, 2, 3 and 5 % by weight manufactured by powder metallurgy method. Composite powders were pressed by applying a ...

The non-isothermal kinetics of mullite formation from both non-activated and mechanically activated kaolinite have been studied by differential thermal analysis (DTA). Kaolinite was mechanically activated in a planetary ...