Abstract:
In this work, a bronze matrix (90 wt% Cu + 10 wt% Sn) was reinforced with SiC and graphite particulates using mechanical alloying and a subsequent current sintering technique. The mechanically ball-milled bronze hybrid matrix composite powders reinforced with 5.0 wt% SiC and 5.0 wt% graphite were cold-compacted on a 1040 steel substrate under a pressure of 300 MPa. The compacted structure was sintered at atmospheric conditions to nearly a full density within 10 min using current sintering, in which the powders were heated by a low voltage and high current and compressed simultaneously. The samples were sintered at three different applied currents (1,500, 1,700, and 1,900 A) to provide dense and well-bonded coatings on steel substrates. Microhardness testing and optical and scanning electron microscopes (SEM) were used for microstructural characterization of the hybrid composites. The tribological characterization of the resulting composites was tested by a block-on-disk method for determination of the wear loss and friction coefficient behaviors against a steel disk. It was pointed out that increasing applied current during the sintering/coating process resulted in obtaining high-hardness and wear-resistant hybrid composite coatings.
