• Characterization of transfer layers on steel surfaces sliding against diamond-like hydrocarbon films in dry nitrogen 

  Bindal, Cuma (ELSEVIER SCIENCE SA, 1995)

  Carbon-rich transfer layers on sliding contact surfaces play important roles in the tribological performance of diamond-like hydrocarbon (DLHC) films. In this study, we investigated the nature of these layers formed on M50 ...
• Formation and self-lubricating mechanisms of boric acid on borided steel surfaces 

  Bindal, Cuma (ELSEVIER SCIENCE SA, 1995)

  In this study, we investigated the formation and self-lubricating mechanisms of thin boron oxide and boric acid films on the surfaces of borided steel substrates. Specifically, we developed an annealing procedure which ...
• Tribological properties of hard carbon films on zirconia ceramics 

  Bindal, Cuma (TAYLOR & FRANCIS INC, 1996)

  In this study, the authors investigated the tribological properties of hard diamondlike carbon (DLC) films on magnesia-partially stabilized zirconia (MgO-PSZ) substrates over a wide range of loads, speeds, temperatures, ...
• A numerical study of geometric and material instability in uniaxial drawn polymers 

  Mimaroğlu, Abdullah; Özel, Ahmet; Sevinç, Vahdettin (ELSEVIER SCI LTD, 1996)

  In this study, the general purpose Finite Element Code, ABAQUS, with a non-linear solution has been employed to study the neck profile in drawn polymers. Attempts are made to obtain the relationship between the neck profile, ...
• Ultralow friction behavior of borided steel surfaces after flash annealing 

  Bindal, Cuma (AMER INST PHYSICS, 1996)

  In this letter, we describe the ultralow friction mechanism of borided steel surfaces subjected to a short-duration, or ''flash,'' annealing procedure. In this procedure, a borided steel surface is exposed to high temperature ...
• METAL MATRIX COMPOSITES 

  Fındık, Fehim; Bindal, Cuma (1996)
• Tribological characterization of smooth diamond films grown in Ar-C-60 and Ar-CH4 plasmas 

  Bindal, Cuma (MYU K K, 1996)

  In this paper, we describe the fundamental tribological mechanisms of smooth, nanocrystalline diamond films grown in Ar-C-60 and Ar-CH4 plasmas. These films can provide very low friction coefficients (approximate to 0.04 ...
• Formation of ultralow friction surface films on boron carbide 

  Bindal, Cuma (AMER INST PHYSICS, 1996)

  In this letter, we describe the formation and ultralow friction mechanisms of a surface film on boron carbide (B4C). This film results from sequential reactions between B4C and oxygen and between the resulting boron oxide ...
• Crystallization kinetics of basalt glass 

  Yılmaz, Şenol (ELSEVIER SCI LTD, 1996)

  The crystallization behaviour of basalt glass at elevated temperatures was studied using glass samples prepared by melting the natural basalt rock from the Thrace region of Turkiye. DTA and XRD analysis revealed the ...
• Crystallization Kinetics of Basalt Glass 

  Yılmaz, Şenol (1996)
• An electron metallographic study of pressure die-cast commercial zinc-aluminium-based alloy ZA27 

  Durman, Mehmet (CHAPMAN HALL LTD, 1997)

  The microstructure of ZA27 pressure die-castings was examined by scanning and transmission electron microscopy after ageing for 5 years at ambient temperatures. Solidification began with the formation of compact aluminium-rich ...
• Reliability of wear volume measurement approaches in relation to the effect of surface finish on friction and wear of Al2O3 

  Mimaroğlu, Abdullah; Yılmaz, Fevzi; Okumuş, Sefer Cem (SOC TRIBOLOGISTS & LUBRICATION ENGINEERS, 1997)

  Wear measurements are notoriously variable. Even the experiments with the same type of material and test machine can give significantly different results. Such discrepancies are mostly due to a lack of adequate control of ...
• Influence of interlayer material and geometry on stress levels in MgO.ZrO2-GG coatings subjected to thermal shock 

  Mimaroğlu, Abdullah; Özel, Ahmet (ELSEVIER SCI LTD, 1997)

  In this paper, coupled (thermal and structure) finite element analysis has been employed to analyze the influence of interlayer material and geometry in MgO.ZrO2-GG coatings subjected to thermal loading. coatings with NiAl, ...
• Grain growth in the MnO added ZnO-6 wt% Sb2O3 ceramic system 

  Toplan, Hüseyin Özkan (ELSEVIER SCI LTD, 1997)

  The effect of MnO additions between 0 and 5 wt% to the grain growth of the ZnO-6 wt% Sb2O3 system was studied between 1000 and 1300 degrees C in air. The kinetic grain growth study carried out using the expression G(n)-G(o)(n) ...
• Utilisation of Power Plant Fly-Ash as a Building Material 

  Şen, Şaduman (1997)
• Fracture toughness of boride formed on low-alloy steels 

  Bindal, Cuma (ELSEVIER SCIENCE SA, 1997)

  In this study, we investigated the fracture toughness of boride layers formed on steel surfaces, The samples used for this study were prepared from low-alloy and low-carbon steels essentially containing Cr and/or Mn as the ...
• A comparison of As-cast and heat treated properties in short fiber reinforced Al-Si piston alloys 

  Akbulut, Hatem; Durman, Mehmet; Yılmaz, Fevzi (PERGAMON-ELSEVIER SCIENCE LTD, 1997)
• Grain Growth in the MnO Added ZnO-6 wt. % Sb2O3 Ceramic System 

  Toplan, Hüseyin Özkan (1997)
• The effect of explosive treatment on the formation of nitrides in Ti-6Al-4V alloy 

  Akbulut, Hatem (TECHNOMIC PUBL CO INC, 1998)

  As-received(A-R) Ti-6Al-4V was explosively welded to 304 stainless steel and, so called, explosively treated (E-T) Ti-6Al-4V specimens were nitride ion treated in a direct current (d.c.) plasma system. The effect of shock ...
• Microstructures and hot tensile properties of pressure-diecast and gravity-cast commercial zinc-based alloys 

  Durman, Mehmet (CARL HANSER VERLAG, 1998)

  The tensile properties of zinc-aluminium based commercial alloys: No.3, ZA-8 and ZA-27 in pressure-diecast and gravity-cast forms have been investigated over a temperature range from 20 degrees C to 260 degrees C. At low ...

View more