Açık Akademik Arşiv Sistemi
Browsing Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering by Title
- DSpace Home
- →
- Fakülteler / Faculties
- →
- Mühendislik Fakültesi
- →
- Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering
- →
- Browsing Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering by Title
JavaScript is disabled for your browser. Some features of this site may not work without it.
Browsing Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering by Title
Now showing items 1-20 of 607
-
(WILEY, 2020)All-solid-state lithium-ion batteries are considered the next-generation energy storage systems. However, certain problems arise from the degradation of anode-electrolyte interface hindering their use especially when lithium ...
-
(ELSEVIER SCIENCE BV, 2018)In this study, we describe new collagen/functionalized multiwalled carbon nanotube/chitosan/hydroxyapatite (Col/f-MWCNT/CS/HA) composite scaffolds which were fabricated by freezing ( - 40 degrees C at 0.9 degrees C/min) ...
-
(ELSEVIER SCIENCE BV, 2018)In this study, we describe new collagen/functionalized multiwalled carbon nanotube/chitosan/hydroxyapatite (Col/f-MWCNT/CS/HA) composite scaffolds which were fabricated by freezing ( - 40 degrees C at 0.9 degrees C/min) ...
-
(PERGAMON-ELSEVIER SCIENCE LTD, 2006)Pure niobium (Nb), tungsten (W) and chromium (Cr) were boronized at 940 degrees C for 2, 4 and 8h. The borided samples were characterized by X-ray diffraction, Scanning electron microscope and microhardness tests. Tribological ...
-
(PERGAMON-ELSEVIER SCIENCE LTD, 1997)
-
(ELSEVIER SCI LTD, 2007)In this study, some properties of borides formed on the AISI 1040 and AISI P20 steel substrates were investigated. Boronizing was performed at 800, 875, and 950 degrees C for 2, 4, 6, and 8 h by using Ekabor 2 powders. The ...
-
(SPRINGER, 2018)In this study, hydroxyapatite coating on titanium material substrate was successfully performed by using biomimetic method. Titanium plates immersed in 1.5 SBF at pH 7.4 and 37 degrees C were analyzed at the end of the ...
-
(SPRINGER, 2018)In this study, hydroxyapatite coating on titanium material substrate was successfully performed by using biomimetic method. Titanium plates immersed in 1.5 SBF at pH 7.4 and 37 degrees C were analyzed at the end of the ...
-
(ELSEVIER SCIENCE BV, 2015)Free standing zinc oxide (ZnO) and multiwalled carbon nanotube (MWCNT) nanocomposite materials are prepared by a sol gel technique giving a new high capacity anode material for lithium ion batteries. Freestanding ZnO/MWCNT ...
-
(WILEY, 2018)The cathode electrodes in commercial Li-ion cells are usually coated on aluminum foils, while the anode part is coated on copper current collector. However, these metallic foils of the electrodes are relatively heavy ...
-
(WILEY, 2018)The cathode electrodes in commercial Li-ion cells are usually coated on aluminum foils, while the anode part is coated on copper current collector. However, these metallic foils of the electrodes are relatively heavy ...
-
(PERGAMON-ELSEVIER SCIENCE LTD, 2004)In the present study, some properties of borides formed on AISI 440C stainless-steel have been investigated. Boronizing was carried out in a solid medium consisting of EKabor(R) powder at a temperature of 950degreesC for ...
-
(ELSEVIER SCIENCE BV, 2018)Electroless nickel-based depositions have been considered as one of the industrially effective methods because of their deposition uniformity, good corrosion properties, high wear resistance and good electrical properties. ...
-
(ELSEVIER SCIENCE BV, 2018)Electroless nickel-based depositions have been considered as one of the industrially effective methods because of their deposition uniformity, good corrosion properties, high wear resistance and good electrical properties. ...
-
(ELSEVIER SCI LTD, 1996)In this study, the general purpose Finite Element Code, ABAQUS, with a non-linear solution has been employed to study the neck profile in drawn polymers. Attempts are made to obtain the relationship between the neck profile, ...
-
(SPRINGER, 2018)In this paper, the current, voltage and temperature of the container of an electric current-activated/assisted sintering (ECAS) system are measured and recorded with respect to time during the sintering process. By ...
-
(SPRINGER, 2018)In this paper, the current, voltage and temperature of the container of an electric current-activated/assisted sintering (ECAS) system are measured and recorded with respect to time during the sintering process. By ...
-
(SAGE PUBLICATIONS LTD, 2016)In this present work, Ni/SiC metal matrix composite coatings were prepared from a modified Watt's type electrolyte containing nano-SiC suspended particles by direct current plating method to increase the wear resistance ...
Now showing items 1-20 of 607
DSpace@Sakarya by Sakarya University Institutional Repository is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 4.0 Unported License..
DSpace@Sakarya:
