Melt Cleanliness Comparison of Chlorine Fluxing and Ar Degassing of Secondary Al-4Cu

Çolak, Murat; Kayıkcı, Ramazan

dc.contributor.authors	Colak, M; Kayikci, R; Dispinar, D;
dc.date.accessioned	2020-01-15T07:30:59Z
dc.date.available	2020-01-15T07:30:59Z
dc.date.issued	2016
dc.identifier.citation	Colak, M; Kayikci, R; Dispinar, D; (2016). Melt Cleanliness Comparison of Chlorine Fluxing and Ar Degassing of Secondary Al-4Cu. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 47, 2709-2705
dc.identifier.issn	1073-5615
dc.identifier.uri	https://hdl.handle.net/20.500.12619/3970
dc.description.abstract	The treatment of liquid aluminum prior to casting typically consists of purging gas and/or fluxes through the melt. By the use of several chemicals during these operations, several environmental problems can occur. Therefore, in this study, the melt cleanliness of Al-4Cu secondary alloy was investigated by comparing the use of argon degassing with or without chlorine fluxing. Reduced pressure test was used to assess the melt quality. Highest quality melt was obtained by Ar degassing with preheated graphite lance without the need to use any chemicals.
dc.description.uri	https://doi.org/10.1007/s11663-016-0745-3
dc.language	English
dc.publisher	SPRINGER
dc.subject	Metallurgy & Metallurgical Engineering
dc.title	Melt Cleanliness Comparison of Chlorine Fluxing and Ar Degassing of Secondary Al-4Cu
dc.type	Article
dc.identifier.volume	47
dc.identifier.startpage	2705
dc.identifier.endpage	2709
dc.contributor.department	Sakarya Üniversitesi/Teknik Eğitim Fakültesi/Metal Eğitimi Bölümü
dc.contributor.saüauthor	Çolak, Murat
dc.contributor.saüauthor	Kayıkcı, Ramazan
dc.relation.journal	METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
dc.identifier.wos	WOS:000384548800002
dc.identifier.doi	10.1007/s11663-016-0745-3
dc.identifier.eissn	1543-1916
dc.contributor.author	Çolak, Murat
dc.contributor.author	Kayıkcı, Ramazan