- DSpace Home
- →
- Fakülteler / Faculties
- →
- Teknik Eğitim Fakültesi
- →
- Recent submissions
JavaScript is disabled for your browser. Some features of this site may not work without it.
Teknik Eğitim Fakültesi: Recent submissions
Now showing items 1-20 of 22
-
(SPRINGER HEIDELBERG, 2019)The selection of most proper materials in engineering design is known as an important stage of the design process. In order to successfully complete this stage, it is necessary to have sufficient knowledge about the structure ...
-
(Polish Acad Sciences Inst Physics, 2019)In the casting of liquid metal, the feeding stops when the mushy zone is clogged and does not allow the transfer of feeding liquid. The growing resistance of the solid dendrites against the fluidity of the feeding liquid ...
-
(PO BOX 197-IV, LJUBLJANA 61001, SLOVENIA, 2014)Friction welding was applied to dissimilar aluminum cast bars alloyed with 2 and 8% copper and the effects of upset time on joint properties were evaluated in this study. The welding process was carried out by a vertical ...
-
(SPRINGER, 2016)The treatment of liquid aluminum prior to casting typically consists of purging gas and/or fluxes through the melt. By the use of several chemicals during these operations, several environmental problems can occur. Therefore, ...
-
(INST ZA KOVINSKE MATERIALE I IN TEHNOLOGIE, 2015)The results showed that the CFS values for solidifying aluminium alloys may vary from 34 % to 57 % depending on the casting conditions. The results also showed that for A356 aluminium-alloy castings the CFS value is not ...
-
(EUROPEAN POLYMER FEDERATION, 2011)The wear and friction performance of GUR 1020 grade ultrahigh molecular weight polyethylene (UHMWPE) polymer was studied in distilled water, HASS (Hank's balanced salt solution) and several protein lubrication environments. ...
-
(SAGE PUBLICATIONS LTD, 2010)The friction and wear properties of pure poly-tetra-fluoro-ethylene (PTFE), 35% carbon filled poly-tetra-fluoro-ethylene (PTFE+35%C), and 17% glass fiber-reinforced polytetra- fluoro-ethylene (PTFE+17% GFR) sliding against ...
-
(SAGE PUBLICATIONS LTD, 2010)In this study, the performance of boric acid (H3BO3)-filled polyamide composites were studied and evaluated at dry-sliding friction conditions. Wear tests were carried out using configuration of composite pin on a rotating ...
-
(VILNIUS GEDIMINAS TECH UNIV, 2013)This study reports the results of an experimental study conducted to determine composite cements manufactured with the combination of Basic Oxygen Furnace (BOF) Slag and Blast Furnace Slag (BFS). The overall objective of ...
-
(INDERSCIENCE ENTERPRISES LTD, 2013)Since the cement industry emits large amounts of greenhouse gases into the atmosphere, the sector is recently under scrutiny. This study empirically investigates the co-integration and the causality relationships between ...
-
(BAUVERLAG BV GMBH, 2009)This paper reports on the results of an experimental study conducted to evaluate the physical properties and strength development of composite cements manufactured with a steel slag (SS) and blast-furnace slag (BFS) ...
-
(ELSEVIER SCI LTD, 2011)Influence of high temperature on the properties of concrete containing non-ground granulated blast-furnace slag (GBFS) and coal bottom ash (BA) as fine aggregate was presented. Six series of concrete mixtures were prepared ...
-
(CANADIAN SCIENCE PUBLISHING, NRC RESEARCH PRESS, 2013)Construction performance parameters have experienced greater international attention and discussion in recent years. In this study, the change in the load-bearing system cost of a reinforced concrete housing estate building ...
-
(ELSEVIER SCIENCE INC, 2012)The construction industry in countries experiencing severe economic crisis has vital importance to get out of stagnation because of its direct relations with 200 different sectors. In this study, the relationship between ...
-
(SPRINGER, 2009)Priority rules are one of the frequently used methods in project programming with resource-constraints. In this paper, the effects of project size and number of resource constraints on project duration are compared to the ...
-
(ASCE-AMER SOC CIVIL ENGINEERS, 2009)The heuristic method is one of the methods used for the scheduling of resource-constrained projects. This method is commonly used in programming the projects with high number of activities and resources such as construction ...
-
(INDERSCIENCE ENTERPRISES LTD, 2013)Concrete structures built on sulfate rich soil or wetland, or directly exposed to seawater are subjected to sulfate attack, which might be critical, as the durability of concrete is highly dependent on its resistance against ...
-
(ELSEVIER SCI LTD, 2011)This paper reports an experimental study of tribological characteristics of cylinder liner (CL)/piston ring (PR) pair. Reciprocating wear process parameters are optimized for minimum weight loss and friction based on mixed ...
-
(ELSEVIER SCIENCE BV, 2012)Seat belt use habit has been investigated according to the education level of drivers. Copies of a questionnaire were distributed to 1000 participants of four different education levels. Factors such as seat belt usage ...
-
(ELSEVIER SCI LTD, 2012)In this study, a steady-state thermal analysis was performed to evaluate the temperature gradients in the standard and two different partially stabilized ceramic coated pistons by using Abaqus (c) finite element (FE) ...
Now showing items 1-20 of 22
DSpace@Sakarya by Sakarya University Institutional Repository is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 4.0 Unported License..
DSpace@Sakarya:
