JavaScript is disabled for your browser. Some features of this site may not work without it.
Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering: Recent submissions
Now showing items 481-500 of 607
-
(POLISH ACAD SCIENCES INST PHYSICS, 2017)In this study, ultra-high molecular weight polyethylene (UHMWPE) - TiO2 composites reinforced with TiO2 particles with weight ratios of 0.5, 1 and 2% were produced by gelation/crystallization method in decalin+antioxidant ...
-
(SPRINGER, 2017)In this study, mechanical activation process was used for intimate mixing as well as producing finely ground particles, increased surface area and improved chemical reactivity of milled materials for producing SrTiO3 from ...
-
(AMER CHEMICAL SOC, 2017)Bioactive and antibacterial coatings on stainless steel substrates were developed and characterized in this study. Silver nanocluster-silica composite coatings of 60-150 nm thickness were deposited using radio frequency ...
-
(POLISH ACAD SCIENCES INST PHYSICS, 2017)In this study, effect of double stage gas nitriding of 34CrAlNi7-10 steel was analyzed. Nitriding processes were carried out in two stages. in the first stage, samples were nitridied at 500 degrees C for 10 h and then in ...
-
(CARL HANSER VERLAG, 2017)Aluminium-based powder metallurgy (PM) alloys have a number of advantages over cast and wrought aluminium alloys. These PM alloys can be produced using either prealloyed or elemental premixes, with the latter offering a ...
-
(ELSEVIER SCIENCE SA, 2017)Thermal barrier coatings (TBCs) were applied to gas turbines to function at higher gas temperatures. Extensive effort has been invested in identifying new materials with even better performance compared to yttria-stabilized ...
-
(ELSEVIER SCIENCE SA, 2017)The precipitation mechanism and microstructure of aged CuCoNiBe alloys have been studied. Two-step increase in the hardness of the material was ascertained and each increase was attributed to the formation of Guinier-Preston ...
-
(EDP SCIENCES S A, 2017)The tensile, flexural and fracture behaviours of alumina short fibre reinforced 2124 Al alloy produced by squeeze-cast method have been investigated. The composite and unreinforced alloys have been subjected to heat treatment ...
-
(POLISH ACAD SCIENCES INST PHYSICS, 2017)The aim of this study is to examine the effect of MgO and Y2O3 to the carbothermal reduction and nitridation of silica. The synthetic silica, MgO and Y2O3 powders were premixed (4wt% MgO-6% Y2O3, 5% MgO-5% Y2O3 and 6% ...
-
(POLISH ACAD SCIENCES INST PHYSICS, 2017)The aim of this research was to investigate microstructural and mechanical properties of the WC-Co-Cr coatings by high velocity oxygen fuel spraying. Woka 3653 (WC10Co4Cr) powder was used as coating material. This powder ...
-
(AMER INST PHYSICS, 2017)In the current study, the effect of particle size and velocity on solid particle erosive wear properties of glass-ceramics produced from cast basalt was investigated. The samples sectioned as the size of 50 x 50 x 12 mm ...
-
(POLISH ACAD SCIENCES INST PHYSICS, 2017)Ba(Ti1-xZrx)O-3 (x = 0 divided by 0.3) ceramics were prepared by the standard solid state reaction method and were sintered at 1450 degrees C for 4 h. The structural and dielectric properties of the samples were studied. ...
-
(POLISH ACAD SCIENCES INST PHYSICS, 2017)In this study, machinable glass-ceramics were produced from vermiculite and K2CO3, SiO2, Al2O3 and MgF2 as additives by melting process. The starting materials were mixed together and milled in a mill with alumina ball for ...
-
(SPRINGER, 2017)In the current study, the main composition was prepared using soda-lime glass with dolomite [CaMg(CO3)(2)] as a foaming agent. The clay powder was added to the main composition in different ratios, and then, the mixtures ...
-
(POLISH ACAD SCIENCES INST PHYSICS, 2017)In this study the determinations of melt quality was carried out by thermal analysis of ductile iron. The aim of the study was to determine the limits of feederless casting after the determination of inoculation quality ...
-
(BEILSTEIN-INSTITUT, 2017)Different polymorphs of MnO2 (alpha-, beta-, and gamma-) were produced by microwave hydrothermal synthesis, and graphene oxide (GO) nanosheets were prepared by oxidation of graphite using a modified Hummers' method. ...
-
(INST ZA KOVINSKE MATERIALE I IN TEHNOLOGIE, 2017)In this research, nano-sized Al2O3 particles were added to silicate-based coatings and the effect of these particles on the microstructure, composition and properties of the coatings was investigated. The effects of the ...
-
(TAYLOR & FRANCIS LTD, 2017)The friction and wear performance of pure polycarbonate (PC) and 2.5, 5, 10, and 30% zinc borate-filled (by wt) PC composites were comparatively evaluated under dry sliding conditions. Wear tests were performed at room ...
-
(WILEY, 2018)In this paper, nanosized Ni3Sn4 nanoparticles were synthesized by chemical reduction technique. A facile strategy is also developed to synthesize the yolk-shell Ni3Sn4 nanoparticles decorated between the layers of multilayer ...
-
Electrophoretic co-deposition of PEEK-hydroxyapatite composite coatings for biomedical applications (ELSEVIER SCIENCE BV, 2018)This study focuses on the optimization of electrophoretic deposition (EPD) and suspension parameters for producing PEEK-hydroxyapatite (HA) coatings with feasible microstructure, adhesion strength, and in-vitro bioactivity. ...
Now showing items 481-500 of 607
DSpace@Sakarya by Sakarya University Institutional Repository is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 4.0 Unported License..
DSpace@Sakarya:
