JavaScript is disabled for your browser. Some features of this site may not work without it.
Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering: Recent submissions
Now showing items 341-360 of 607
-
(TANGER, 2015)In this study, ZnO/MWCNT nanocomposites are produced by magnetron sputtering radio frequency (RF) plasma process as anode materials for Li-ion batteries. The physical, structural, and electrochemical behaviors of the ...
-
(ELSEVIER, 2015)Tin-Nickel/multiwalled carbon nanotube (MWCNT) composite plating was performed using a pyrophosphate bath. To reduce irreversible capacity and improve cycle performance of tin electrodes, Sn-Ni/MWCNT nanocomposite electrodes ...
-
(ELSEVIER SCIENCE BV, 2015)Graphene Oxide (GO)/alpha-MnO2 nanocomposite air breathing cathodes were prepared using mechanical alloying method. For preparation of GO/alpha-MnO2 nanocomposite cathodes, GO was produced by Hummer's method and alpha-MnO2 ...
-
(SPRINGER INT PUBLISHING AG, 2015)This method can be used for the surface modification treatment of materials producing different surface properties. This paper presents the results obtained from an experimental work investigating the changes in some ...
-
(MASSON EDITEUR, 2015)Conclusion. - The frequency of CTR implantation was 0.97% due to our study. In complicated cataract surgeries, CTR implantation seems to improve clinical outcomes. (C) 2015 Elsevier Masson SAS. All rights reserved.
-
(AMER SCIENTIFIC PUBLISHERS, 2015)In this study, core shell SnO2/MWCNT nanocomposites were produced as a high rate anode material for Li-ion batteries via two steps. Firstly, MWCNT based buckypapers were produced via vacuum filtration techniques. Then, a ...
-
(KOREAN ASSOC CRYSTAL GROWTH, INC, 2015)This paper presents the results of research on mechanical activation of raw talc in planetary mill. Raw talc was mechanically activated in a planetary mill for five different grinding times as 15 min, 30 min, 45 min, 60 ...
-
Cyclic Performance Tests of Si/MWCNT Composite Lithium Ion Battery Anodes at Different Temperatures (POLISH ACAD SCIENCES INST PHYSICS, 2015)In this study silicon-multi walled carbon nanotube (Si-MWCNT) lithium ion battery anodes were produced and their electrochemical galvanostatic charge/discharge tests were conducted at various (25 degrees C, 35 degrees C, ...
-
(POLISH ACAD SCIENCES INST PHYSICS, 2015)In this study, silicon/multi-wall carbon nanotube (Si/MWCNT) and silicon/molybdenum/multi-wall carbon nanotube (Si/Mo/MWCNT) composites were produced by high speed planetary ball milling. Produced Si/MWCNT composite ...
-
(SPRINGER INT PUBLISHING AG, 2015)In this study, usage of gabbro and zeolite in the manufacturing of ceramic products were investigated. Three different compositions which consist of zeolite and gabbro as starting materials were prepared to manufacture a ...
-
(POLISH ACAD SCIENCES INST PHYSICS, 2015)In this study, the effect of B2O3 addition on the sintering behavior of 0-5-10% ZrO2 doped barium titanate based microwave dielectric ceramics were investigated. For this purpose, the powder mixtures consisting of BaCO3, ...
-
(INST ZA KOVINSKE MATERIALE I IN TEHNOLOGIE, 2015)In this study, the microstructure and surface properties of a low-alloy steel (AISI 4140) treated with pulsed plasma were investigated. Three different plasma-gun nozzle distances of (60, 70 and 80) mm and one battery ...
-
(POLISH ACAD SCIENCES INST PHYSICS, 2015)SiO2 and Al2O3 nano fillers were added to an electrolyte composed of a solution 1 M LiPF6 in tetra ethylene glycol dimethyl ether (TEGDME) and the effects of these nano powders on capacity and cycling performances were ...
-
(ELSEVIER SCIENCE BV, 2015)Free standing zinc oxide (ZnO) and multiwalled carbon nanotube (MWCNT) nanocomposite materials are prepared by a sol gel technique giving a new high capacity anode material for lithium ion batteries. Freestanding ZnO/MWCNT ...
-
(ELSEVIER, 2015)Nickel-cobalt (Ni-Co) alloys and Ni-Co/multiwalled carbon nanotube (MWCNT) composite coatings were prepared under direct current (DC), pulse current (PC) and pulse reverse current (PRC) methods. The effect of different ...
-
(ELSEVIER SCI LTD, 2015)In this study, bronze matrix was reinforced with nickel coated nano SiC particles using mechanical alloying and then subsequent rapid current sintering technique. Mechanical ball milling of bronze matrix composite powders ...
-
(POLISH ACAD SCIENCES INST PHYSICS, 2015)In the present study, AISI 1020 plain carbon steel was surface alloyed with preplaced 50%Fe-10%W-40%B alloying powders using a tungsten inert gas (TIC) heat source. Microstructure, hardness, and wear resistance of the ...
-
(KOREAN ASSOC CRYSTAL GROWTH, INC, 2015)A mica glass-ceramic in the SiO2-Al2O3-MgO-K2O-B2O3-F-2 glass system was prepared by a melting method. The crystallization behaviour and crystallization kinetics of a sample with glass-ceramic composition were examined. ...
-
(ELSEVIER SCIENCE BV, 2015)A nickel plating bath containing WC particles was used to obtain hard and wear-resistant particle reinforced Ni/WC MMCs on steel surfaces for anti-wear applications. Copper substrates were used for electro co-deposition ...
-
(SPRINGER, 2015)0.5 wt. % B2O3 doped BaZrxTi1-xO3 ceramics (x = 0, 0.1, 0.2, 0.3, 0.4) were synthesized by adapting the solid-state synthesis method. B2O3 used as a sintering additive in the BT and BZT ceramics can vaporize easily at high ...
Now showing items 341-360 of 607
DSpace@Sakarya by Sakarya University Institutional Repository is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 4.0 Unported License..
DSpace@Sakarya:
