DSpace Home
→
Fakülteler / Faculties
→
Mühendislik Fakültesi
→
Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering
→
Browsing Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering by Subject

Browsing Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering by Subject "Polymer Science"

Now showing items 1-10 of 10

Coating of Al mould surfaces with polytetrafluoroethylene (PTFE), fluorinated ethylene propylene (FEP), perfluoroalkoxy (PFA) and ethylene-tetrafluoroethylene (ETFE)

Akıncı, Akın (WALTER DE GRUYTER GMBH, 2009)

Because of low cost, easily productivity and high thermal conductivity, aluminum (Al) moulds are preferred in the production of the polyurethane (PUR) parts. In this study, adhesion behavior and surface properties of coated ...
Effect of particle size on microstructural and mechanical properties of UHMWPE-TiO2 composites produced by gelation and crystallization method

Çelebi Efe, Gözde Fatma; Altınsoy, İbrahim; Türk, Serbülent; Bindal, Cuma; A. Hikmet Ucisik (WILEY, 2019)

In this study, Ultra-high-molecular-weight polyethylene (UHMWPE) in 0.5 wt % concentration-0.5, 1, and 2 wt % nanosized and micron-sized TiO2 composites were produced via gelation/crystallization method in decalin + ...
Evaluation of the Performance of H3BO3-filled Polyamide Composite

Ünal, Hüseyin; Yetgin, Salih Hakan; Şen, Uğur; Mimaroğlu, Abdullah (SAGE PUBLICATIONS LTD, 2010)

In this study, the performance of boric acid (H3BO3)-filled polyamide composites were studied and evaluated at dry-sliding friction conditions. Wear tests were carried out using configuration of composite pin on a rotating ...
Mechanical Properties of Cost-Effective Polypropylene Composites Filled With Red-Mud Particles

Akıncı, Akın; Akbulut, Hatem; Yılmaz, Fevzi (RAPRA TECHNOLOGY LTD, 2008)

In recent years, the use of filler materials, such as red mud, in composites has increased. In this study, the use of industrial waste red mud as a filler material in an isotactic polypropylene (iPP) polymer-matrix composite ...
Study of the Mechanical Properties of Nano Silver Nitrate Filled Polypropylene Composites

Özel, Ahmet; Ünal, Hüseyin; Mimaroğlu, Abdullah (WILEY-V C H VERLAG GMBH, 2018)

In this investigation, the mechanical properties of silver nitrate nanoparticles filled polypropylene composite is evaluated. The silver nitrate particles are added to the matrix by 1, 3, 5, and 10% by weight. The composite ...
Study of the Mechanical Properties of Nano Silver Nitrate Filled Polypropylene Composites

Özel, Ahmet; Ünal, Hüseyin; Mimaroğlu, Abdullah (WILEY-V C H VERLAG GMBH, 2018)

In this investigation, the mechanical properties of silver nitrate nanoparticles filled polypropylene composite is evaluated. The silver nitrate particles are added to the matrix by 1, 3, 5, and 10% by weight. The composite ...
Study on the wear properties of zinc borate filled polycarbonate composites against 4140 steel under dry friction

Akıncı, Akın (TAYLOR & FRANCIS LTD, 2017)

The friction and wear performance of pure polycarbonate (PC) and 2.5, 5, 10, and 30% zinc borate-filled (by wt) PC composites were comparatively evaluated under dry sliding conditions. Wear tests were performed at room ...
The Determining Role of Inorganic Particles on Physical and Mechanical Properties of Reinforced Polyethylene Composites

Akıncı, Akın (SAGE PUBLICATIONS LTD, 2010)

The interactions between basalt chosen as a reinforcement material and low-density polyethylene ( LDPE) chosen as a matrix material in polymer matrix composite (PMC) were investigated in this study. A variety of mechanical ...
The Effect of Samples Geometry and Thermal Cycling Test Type on the Thermal Shock Behaviour of Plasma Sprayed TBCs

Altuncu, Ekrem; Erdoğan, Garip; Üstel, Fatih; Türk, Ahmet (WILEY-V C H VERLAG GMBH, 2009)

Thermal barrier coatings (TBCs) are effective in protecting gas turbine blades by insulating them from hot gas passing through. In addition, they provide prevention of thermal shock, oxidation resistance and improved engine ...
The effect of the red mud on polymer crystallization and the interaction between the polymer-filler

Akıncı, Akın; Akbulut, Hatem; Yılmaz, Fevzi (TAYLOR & FRANCIS INC, 2007)

In this study, the use of industrial waste red mud was investigated as a filler/reinforcement material in composite material production. Polypropylene ( PP) was chosen as a matrix material and used with the red-mud with ...