Açık Akademik Arşiv Sistemi

Browsing Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering by Subject "Physics"

Browsing Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering by Subject "Physics"

Sort by: Order: Results:

  • Özbek, İbrahim; Bindal, Cuma (PERGAMON-ELSEVIER SCIENCE LTD, 2006)
    Pure niobium (Nb), tungsten (W) and chromium (Cr) were boronized at 940 degrees C for 2, 4 and 8h. The borided samples were characterized by X-ray diffraction, Scanning electron microscope and microhardness tests. Tribological ...
  • Özbek, İbrahim; Şen, Şaduman; İpek, Mediha; Bindal, Cuma; Zeytin, Sakin (PERGAMON-ELSEVIER SCIENCE LTD, 2004)
    In the present study, some properties of borides formed on AISI 440C stainless-steel have been investigated. Boronizing was carried out in a solid medium consisting of EKabor(R) powder at a temperature of 950degreesC for ...
  • A. Akyol; Algül, Hasan; Uysal, Mehmet; Akbulut, Hatem; Alp, Ahmet (ELSEVIER SCIENCE BV, 2018)
    Electroless nickel-based depositions have been considered as one of the industrially effective methods because of their deposition uniformity, good corrosion properties, high wear resistance and good electrical properties. ...
  • A. Akyol; Algül, Hasan; Uysal, Mehmet; Akbulut, Hatem; Alp, Ahmet (ELSEVIER SCIENCE BV, 2018)
    Electroless nickel-based depositions have been considered as one of the industrially effective methods because of their deposition uniformity, good corrosion properties, high wear resistance and good electrical properties. ...
  • Şen, Şaduman (PERGAMON-ELSEVIER SCIENCE LTD, 2005)
    There are a lot of technologically interesting characteristics of chromium carbide coating deposited by pack method which is the production of hard, wear-resistant, oxidation- and corrosion-resistant coating layer on the ...
  • Özdemir, Özkan; Zeytin, Sakin; Bindal, Cuma (PERGAMON-ELSEVIER SCIENCE LTD, 2009)
    The production of intermetallic compound was carried out in an electrical resistance furnace in open air under 150 MPa uniaxial pressure at 1050 degrees C for 1 hour using aluminum powder with 15 mu m size and Carbonyl-nickel ...
  • Toçoğlu, Ubeyd; Cevher, Özgür; Akbulut, Hatem; Ay Oral; Zbb Oral; Me Akoz; M Sezer; Kol, Suat (AMER INST PHYSICS, 2016)
    In this study tin-multi walled carbon nanotube (Sn-MWCNT) lithium ion battery anodes were produced and their electrochemical galvanostatic charge/discharge tests were conducted at various (25 degrees C, 35 degrees C, 50 ...
  • Toçoğlu, Ubeyd; Cevher, Özgür; Akbulut, Hatem; Ay Oral; Zbb Oral; Me Akoz; M Sezer; Kol, Suat (AMER INST PHYSICS, 2016)
    In this study tin-multi walled carbon nanotube (Sn-MWCNT) lithium ion battery anodes were produced and their electrochemical galvanostatic charge/discharge tests were conducted at various (25 degrees C, 35 degrees C, 50 ...
  • Ateş, Asude; U. Onen; Ercenk, Ediz; Yılmaz, Şenol; Ay Oral; Zbb Oral; M Sezer; Kol, Suat; Me Akoz (AMER INST PHYSICS, 2017)
    Basalt based glass-ceramics were prepared by conventional melt-quenching technique and subsequently converted to glass-ceramics by a controlled nucleation and crystallization process. Glass materials were obtained by melt ...
  • U. Gunay; Öztürk, Mahpeyker; Ercenk, Ediz; Yılmaz, Şenol; Ay Oral; Zbb Oral; M Sezer; Kol, Suat; Me Akoz (AMER INST PHYSICS, 2017)
    In the current study, the effect of particle size and velocity on solid particle erosive wear properties of glass-ceramics produced from cast basalt was investigated. The samples sectioned as the size of 50 x 50 x 12 mm ...
  • Şen, Şaduman; Şen, Uğur; Bindal, Cuma (ELSEVIER SCIENCE SA, 2005)
    In present study, kinetic studies on borided AISI 5140, AISI 4340 and AISI D2 steels are reported. Steels were borided in a salt bath consisting of borax, boric acid and ferro-silicon between 1073 and 1273 K for 2, 4, 6 ...
  • Abakay, Eray; Durmaz, Mustafa; Şen, Şaduman; Şen, Uğur (POLISH ACAD SCIENCES INST PHYSICS, 2017)
    Thermo-reactive diffusion/deposition technique is an alternative to physical vapor deposition and chemical vapor deposition techniques for obtaining wear and corrosion resistant coatings on steel parts. In this work, ...
  • Yener, Tuba; Altınsoy, İbrahim; S. C. Yener; Yener, Şuayb Çağrı; Çelebi Efe, Gözde Fatma; Özbek, İbrahim; Bindal, Cuma (POLISH ACAD SCIENCES INST PHYSICS, 2015)
    In this study, the influences of B4C ratios on some mechanical and physical properties such as relative density, microhardness and electrical properties of cold pressed Cu-B4C composites were investigated. Curve fitting ...
  • Özdemir, Özkan; Zeytin, Sakin; Bindal, Cuma (PERGAMON-ELSEVIER SCIENCE LTD, 2008)
    Boronizing was performed by using a solid medium of Ekabor powders at 1073, 1148 and 1223 K for 2, 4 and 8 h. After boronizing, the major dominant phase was found to be Fe2B and the minors were CrB and Ni2B. Boride coating ...
  • Üstel, Fatih (ELSEVIER SCIENCE SA, 2000)
    In aluminium die casting, tools are exposed to erosion, corrosion and soldering due to the frequent contact of the tool surface to the casting alloy, to heat checking and gross cracking due to thermal fatigue and to oxidation ...
  • Türk, Ahmet (ELSEVIER SCIENCE SA, 2006)
    The present paper concerns an assessment of microstructural and mechanical properties of WC-based cermet coatings for a roller cylinder. With this regard, WC-based coatings were fabricated on NiAl deposited 316 L stainless ...
  • Güler, Mehmet Oğuz; Aslihan Erdas; Deniz Nalci; Akbulut, Hatem (ELSEVIER SCI LTD, 2015)
    In this study, a strategy used to design high capacity, Cu coated LiCr2/3V1/6Mn1/6O2 electrodes for lithium-ion batteries is discussed. The advantages of the LiCr2/3V1/6Mn1/6O2 component and its influence on the structural ...
  • Türk, Serbülent; Türk, Serbülent; Altınsoy, İbrahim; Çelebi Efe, Gözde Fatma; İpek, Mediha; Özacar, Mahmut; Bindal, Cuma (ELSEVIER SCIENCE SA, 2018)
    Ti6Al4V plates were exposed to soaking alkali treatment resulted in Na0.23TiO2 phase on the surface before realizing biomimetic Calcium-Phosphate (CaP) coating in prepared m-5xSBF and 5xSBF solutions at 37 degrees C and ...
  • Türk, Serbülent; Türk, Serbülent; Altınsoy, İbrahim; Çelebi Efe, Gözde Fatma; İpek, Mediha; Özacar, Mahmut; Bindal, Cuma (ELSEVIER SCIENCE SA, 2018)
    Ti6Al4V plates were exposed to soaking alkali treatment resulted in Na0.23TiO2 phase on the surface before realizing biomimetic Calcium-Phosphate (CaP) coating in prepared m-5xSBF and 5xSBF solutions at 37 degrees C and ...
  • Genel, Kenan; Özbek, İbrahim; Kurt, Ali Vasfi; Bindal, Cuma (ELSEVIER SCIENCE SA, 2002)
    In the present study, boriding response of AISI W1 steel and prediction of boride layer properties were investigated by using artificial neural network (ANN). Boronizing heat treatment was carried out in a solid medium ...