Açık Akademik Arşiv Sistemi
Browsing Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering by Subject "Materials Science"
- DSpace Home
- →
- Fakülteler / Faculties
- →
- Mühendislik Fakültesi
- →
- Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering
- →
- Browsing Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering by Subject
JavaScript is disabled for your browser. Some features of this site may not work without it.
Browsing Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering by Subject "Materials Science"
Now showing items 1-20 of 170
-
(WILEY, 2020)All-solid-state lithium-ion batteries are considered the next-generation energy storage systems. However, certain problems arise from the degradation of anode-electrolyte interface hindering their use especially when lithium ...
-
(ELSEVIER SCIENCE BV, 2018)In this study, we describe new collagen/functionalized multiwalled carbon nanotube/chitosan/hydroxyapatite (Col/f-MWCNT/CS/HA) composite scaffolds which were fabricated by freezing ( - 40 degrees C at 0.9 degrees C/min) ...
-
(ELSEVIER SCIENCE BV, 2018)In this study, we describe new collagen/functionalized multiwalled carbon nanotube/chitosan/hydroxyapatite (Col/f-MWCNT/CS/HA) composite scaffolds which were fabricated by freezing ( - 40 degrees C at 0.9 degrees C/min) ...
-
(ELSEVIER SCI LTD, 2007)In this study, some properties of borides formed on the AISI 1040 and AISI P20 steel substrates were investigated. Boronizing was performed at 800, 875, and 950 degrees C for 2, 4, 6, and 8 h by using Ekabor 2 powders. The ...
-
(SPRINGER, 2018)In this study, hydroxyapatite coating on titanium material substrate was successfully performed by using biomimetic method. Titanium plates immersed in 1.5 SBF at pH 7.4 and 37 degrees C were analyzed at the end of the ...
-
(SPRINGER, 2018)In this study, hydroxyapatite coating on titanium material substrate was successfully performed by using biomimetic method. Titanium plates immersed in 1.5 SBF at pH 7.4 and 37 degrees C were analyzed at the end of the ...
-
(ELSEVIER SCIENCE BV, 2015)Free standing zinc oxide (ZnO) and multiwalled carbon nanotube (MWCNT) nanocomposite materials are prepared by a sol gel technique giving a new high capacity anode material for lithium ion batteries. Freestanding ZnO/MWCNT ...
-
(ELSEVIER SCI LTD, 1996)In this study, the general purpose Finite Element Code, ABAQUS, with a non-linear solution has been employed to study the neck profile in drawn polymers. Attempts are made to obtain the relationship between the neck profile, ...
-
(SAGE PUBLICATIONS LTD, 2016)In this present work, Ni/SiC metal matrix composite coatings were prepared from a modified Watt's type electrolyte containing nano-SiC suspended particles by direct current plating method to increase the wear resistance ...
-
(FREUND PUBLISHING HOUSE LTD, 2006)In this study the abrasive wear behaviour of liquid crystal polymer (LCP), glass reinforced polyamide 46 (PA 46+30%GFR), and 30% glass fibre reinforced polyphenylenesulfide (PPS+30%GFR) engineering polymers were studied ...
-
(ELSEVIER SCI LTD, 2005)In this study the abrasive wear behaviour of aliphatic polyketone (APK), polyoxymethylene (POM), ultrahigh molecular weight polyethylene (UHMWPE), polyamide 66 (PA66), and 30% glass fibre reinforced polyphenylenesulfide ...
-
(SPRINGER, 2008)In this study the wear volume map is obtained and considered for evaluation of the abrasive wear performance for polyamide (PA6) and PA6 composites. Polyamide composites were tailored using 25 wt.% glass bead, 20 wt.% talc ...
-
(TRANS TECH PUBLICATIONS LTD, 2010)Glass fiber reinforced polymer (GRP) and needle reinforced polymer (NRP) composites have been used to produce a new kind of thin cross section liner for rehabilitation of in ground sewer pipes. The liner made from resin ...
-
(ELSEVIER SCI LTD, 2007)Plasma-sprayed coatings of Al-Si/B4C have been prepared on Al-Si piston alloys for diesel engine motors. The Al-Si/B4C composite powders including 5-25 wt% B4C were prepared by mixing and ball-milling processes. These ...
-
(ELSEVIER SCI LTD, 2006)In this study, the effect of applied load and sliding speed on friction and wear behaviour of 25 wt% bronze filled polytetrafluoroethylene (PTFE) composite is experimentally examined and analytically analysed. Friction and ...
-
(CHAPMAN HALL LTD, 1997)The microstructure of ZA27 pressure die-castings was examined by scanning and transmission electron microscopy after ageing for 5 years at ambient temperatures. Solidification began with the formation of compact aluminium-rich ...
-
(ELSEVIER SCIENCE BV, 2002)In this study, we investigated stress relaxation behavior of the human articular cartilage on femoral head. Articular cartilage is a white dense connective tissue that covers the bone ends within diarthrodial joints and ...
-
(ELSEVIER SCI LTD, 2009)In this study, the effects of bond coat on the properties of Al2O3 and Al2O3-13 wt.% TiO2 coatings, which is plasma sprayed onto a commercial pure titanium substrate with and without Ni-5 wt.% A] (METCO 450 NS) as bond ...
-
(ELSEVIER SCIENCE SA, 2004)In this study, some properties of borided perlitic ductile irons were investigated. Boronizing was realized in a salt bath and appropriate boronizing heat treatment was carried out between under atmospheric pressure. Borides ...
-
(AUSTRALIAN CERAMIC SOCIETY, 2015)Lustre is defined as "metal-glass nanocomposite thin layer composed by dispersing copper or silver nano particles in silica based glassy matrix". The technique is based on a specific firing of ceramic in a reducing atmosphere ...
Now showing items 1-20 of 170
DSpace@Sakarya by Sakarya University Institutional Repository is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 4.0 Unported License..
DSpace@Sakarya:
