DSpace Home
→
Fakülteler / Faculties
→
Mühendislik Fakültesi
→
Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering
→
Browsing Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering by Author

Browsing Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering by Author "Yener, Şuayb Çağrı"

Now showing items 1-8 of 8

A process control method for the electric current-activated/assisted sintering system based on the container-consumed power and temperature estimation

Yener, Şuayb Çağrı; Yener, Şuayb Çağrı; Yener, Tuba; Resat Mutlu (SPRINGER, 2018)

In this paper, the current, voltage and temperature of the container of an electric current-activated/assisted sintering (ECAS) system are measured and recorded with respect to time during the sintering process. By ...
A process control method for the electric current-activated/assisted sintering system based on the container-consumed power and temperature estimation

Yener, Şuayb Çağrı; Yener, Şuayb Çağrı; Yener, Tuba; Resat Mutlu (SPRINGER, 2018)

In this paper, the current, voltage and temperature of the container of an electric current-activated/assisted sintering (ECAS) system are measured and recorded with respect to time during the sintering process. By ...
An Evaluation of Cu-B4C Composites Manufactured by Powder Metallurgy

Yener, Tuba; Altınsoy, İbrahim; S. C. Yener; Yener, Şuayb Çağrı; Çelebi Efe, Gözde Fatma; Özbek, İbrahim; Bindal, Cuma (POLISH ACAD SCIENCES INST PHYSICS, 2015)

In this study, the influences of B4C ratios on some mechanical and physical properties such as relative density, microhardness and electrical properties of cold pressed Cu-B4C composites were investigated. Curve fitting ...
ELECTROMAGNETIC-SHIELDING EFFECTIVENESS AND FRACTURE BEHAVIOR OF LAMINATED (Ni-NiAl3) COMPOSITES

Yener, Tuba; Yener, Tuba; Yener, Şuayb Çağrı; Yener, Şuayb Çağrı; Zeytin, Sakin (INST ZA KOVINSKE MATERIALE I IN TEHNOLOGIE, 2016)

In this research Ni-NiAl3 multilayer composites were produced through reactive sintering in an open atmosphere using Ni and Al foils with a 250-mu m initial thickness. The sintering was performed at 700 degrees C under 2 ...
Finite Difference Analysis of a Resistive Sintering System Container

Yener, Tuba; Yener, Şuayb Çağrı; Resat Mutlu (AMER SCIENTIFIC PUBLISHERS, 2019)

Resistive sintering is a new method which enables the production of different material types by using mechanical load and electric current. For the required process performance, it is necessary to set the parameters such ...
MECHANICAL CHARACTERIZATIONS AND ELECTROMAGNETIC WAVE SHIELDING PROPERTIES OF METALLIC NI PARTICULATED Al2O3 CERAMIC MATRIX COMPOSITES

Yener, Tuba; Yener, Şuayb Çağrı; İpek, Mediha; Gozde F. Efe Celebi; Altınsoy, İbrahim; Zeytin, Sakin; Bindal, Cuma (TANGER LTD, 2017)

The present paper describes producing alumina ceramic matrix composites reinforced with nickel at ratios of 1 % to 7 % by weight and their resultant mechanical and electromagnetic properties. In this study powder metallurgy ...
Nb addition effect on microstructural properties of Ti-TiAl3 in situ composites produced by resistive sintering

Yener, Tuba; Yener, Tuba; Yener, Şuayb Çağrı; Yener, Şuayb Çağrı; Zeytin, Sakin (SPRINGER, 2018)

In this study, as an alloying element, the effect of niobium addition by 5mass% on the TiAl3 matrix in situ composites produced by resistive sintering method was investigated. As starting materials, aluminum, titanium and ...
Nb addition effect on microstructural properties of Ti-TiAl3 in situ composites produced by resistive sintering

Yener, Tuba; Yener, Tuba; Yener, Şuayb Çağrı; Yener, Şuayb Çağrı; Zeytin, Sakin (SPRINGER, 2018)

In this study, as an alloying element, the effect of niobium addition by 5mass% on the TiAl3 matrix in situ composites produced by resistive sintering method was investigated. As starting materials, aluminum, titanium and ...