Açık Akademik Arşiv Sistemi
Browsing Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering by Subject "Physics"
- DSpace Home
- →
- Fakülteler / Faculties
- →
- Mühendislik Fakültesi
- →
- Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering
- →
- Browsing Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering by Subject
JavaScript is disabled for your browser. Some features of this site may not work without it.
Browsing Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering by Subject "Physics"
Now showing items 21-40 of 171
-
Carbon-silicon composite anode electrodes modified with MWCNT for high energy battery applications (ELSEVIER SCIENCE BV, 2018)In this study, we comparatively study the electrochemical characteristics of Si, Si-C and vacuum-assisted filtration fabrication of a novel free-standing Si@C/Mutli Wall Carbon Nanotubes (MWCNT) nanocomposite. The surfaces ...
-
Carbon-silicon composite anode electrodes modified with MWCNT for high energy battery applications (ELSEVIER SCIENCE BV, 2018)In this study, we comparatively study the electrochemical characteristics of Si, Si-C and vacuum-assisted filtration fabrication of a novel free-standing Si@C/Mutli Wall Carbon Nanotubes (MWCNT) nanocomposite. The surfaces ...
-
(PERGAMON-ELSEVIER SCIENCE LTD, 2002)The present study reports on characterization of borided AISI 316L stainless steel implant. Boronizing heat treatment was performed on a cylindrical bar of AISI 316L austenitic surgical stainless steel with a diameter of ...
-
(ELSEVIER SCIENCE SA, 1999)This study reports on characterization of borides formed on impurity-controlled steels essentially containing 0.3% C, 0.20 P, 0.5% Cr; 0.3% C, 0.02% P, and 1.0% Cr. The formation of borides on the impurity-controlled ...
-
(PERGAMON-ELSEVIER SCIENCE LTD, 2007)In the present study, some mechanical properties of borides formed on the impurity-controlled plain carbon steel essentially containing 0.3% C, 0.02% P in weight was investigated. The formation of borides on the concerned ...
-
(PERGAMON-ELSEVIER SCIENCE LTD, 2010)In this study some properties of copper produced by cementation method and its composites reinforced with 1wt% 2wt% 3wt% and 5wt% SiC particles produced by powder metallurgy method were investigated Composite powders were ...
-
(ELSEVIER SCIENCE SA, 1995)Carbon-rich transfer layers on sliding contact surfaces play important roles in the tribological performance of diamond-like hydrocarbon (DLHC) films. In this study, we investigated the nature of these layers formed on M50 ...
-
Characterization of two-phase nickel aluminides produced by pressure-assisted combustion synthesis (PERGAMON-ELSEVIER SCIENCE LTD, 2007)Two-phase (B2 + L1(2)) nickel aluminide intermetallic compounds were synthesized by the pressure-assisted volume combustion synthesis (CS). The production and characterization of the samples containing NiAl + Ni3Al were ...
-
(POLISH ACAD SCIENCES INST PHYSICS, 2017)In this study, ultra-high molecular weight polyethylene (UHMWPE) - TiO2 composites reinforced with TiO2 particles with weight ratios of 0.5, 1 and 2% were produced by gelation/crystallization method in decalin+antioxidant ...
-
(ELSEVIER SCIENCE SA, 2015)The effects of two different reinforcements of WC and graphene on the structural and tribological properties of copper matrix were investigated. Cu/WC, Cu/graphene and hybrid Cu/WC/graphene nanocomposites were co-deposited ...
-
(POLISH ACAD SCIENCES INST PHYSICS, 2018)Micro arc oxidized TiO2 coatings were prepared in different concentrations of (CH3COO)(2)Ca center dot H2O and different coating times on biomedical Ti6Al4V alloy. The surface topography, phase, and element composition of ...
-
(POLISH ACAD SCIENCES INST PHYSICS, 2018)Micro arc oxidized TiO2 coatings were prepared in different concentrations of (CH3COO)(2)Ca center dot H2O and different coating times on biomedical Ti6Al4V alloy. The surface topography, phase, and element composition of ...
-
(ELSEVIER, 2015)Nickel-cobalt (Ni-Co) alloys and Ni-Co/multiwalled carbon nanotube (MWCNT) composite coatings were prepared under direct current (DC), pulse current (PC) and pulse reverse current (PRC) methods. The effect of different ...
-
(POLISH ACAD SCIENCES INST PHYSICS, 2015)In this study, LiCr0.2V0.4Mn1.4O4 cathode active electrode materials were produced via a facile sol-gel method at 800 degrees C. The surfaces of the LiCr0.2V0.4Mn1.4O4 cathode active electrode materials were then coated ...
-
Cyclic Performance Tests of Si/MWCNT Composite Lithium Ion Battery Anodes at Different Temperatures (POLISH ACAD SCIENCES INST PHYSICS, 2015)In this study silicon-multi walled carbon nanotube (Si-MWCNT) lithium ion battery anodes were produced and their electrochemical galvanostatic charge/discharge tests were conducted at various (25 degrees C, 35 degrees C, ...
-
(POLISH ACAD SCIENCES INST PHYSICS, 2017)In this study the determinations of melt quality was carried out by thermal analysis of ductile iron. The aim of the study was to determine the limits of feederless casting after the determination of inoculation quality ...
-
(POLISH ACAD SCIENCES INST PHYSICS, 2016)Nano-indentation is an important technique to determine the Young modulus of multiphase materials where normal tensile tests are not appropriate. In this work, Ti-TiAl3 metallic-intermetallic laminate composites have been ...
-
(POLISH ACAD SCIENCES INST PHYSICS, 2017)In this study, machinable glass-ceramics were produced from vermiculite and K2CO3, SiO2, Al2O3 and MgF2 as additives by melting process. The starting materials were mixed together and milled in a mill with alumina ball for ...
-
(SPRINGER, 2019)The measured capacitance and conductance-voltage (C & G/omega-V) data between 1 and 200 kHz of Al/(BSA-doped-PANI)/p-InP structure were examined to uncover real and imaginary components of complex permittivity (epsilon* = ...
-
(PERGAMON-ELSEVIER SCIENCE LTD, 2004)Ti-6Al-4V alloys, which were exposed to an explosive shock process, were nitrided in nitrogen plasma in the temperature range of 700-900degreesC for 3-12 h. During the plasma nitriding, the surface layer consisted of TiN ...
Now showing items 21-40 of 171
DSpace@Sakarya by Sakarya University Institutional Repository is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 4.0 Unported License..
DSpace@Sakarya:
