- DSpace Home
- →
- Fakülteler / Faculties
- →
- Mühendislik Fakültesi
- →
- Recent submissions
JavaScript is disabled for your browser. Some features of this site may not work without it.
Mühendislik Fakültesi: Recent submissions
Now showing items 501-520 of 2863
-
(POLISH ACAD SCIENCES INST PHYSICS, 2017)In this study the determinations of melt quality was carried out by thermal analysis of ductile iron. The aim of the study was to determine the limits of feederless casting after the determination of inoculation quality ...
-
(BEILSTEIN-INSTITUT, 2017)Different polymorphs of MnO2 (alpha-, beta-, and gamma-) were produced by microwave hydrothermal synthesis, and graphene oxide (GO) nanosheets were prepared by oxidation of graphite using a modified Hummers' method. ...
-
(INST ZA KOVINSKE MATERIALE I IN TEHNOLOGIE, 2017)In this research, nano-sized Al2O3 particles were added to silicate-based coatings and the effect of these particles on the microstructure, composition and properties of the coatings was investigated. The effects of the ...
-
(TAYLOR & FRANCIS LTD, 2017)The friction and wear performance of pure polycarbonate (PC) and 2.5, 5, 10, and 30% zinc borate-filled (by wt) PC composites were comparatively evaluated under dry sliding conditions. Wear tests were performed at room ...
-
(WILEY, 2018)In this paper, nanosized Ni3Sn4 nanoparticles were synthesized by chemical reduction technique. A facile strategy is also developed to synthesize the yolk-shell Ni3Sn4 nanoparticles decorated between the layers of multilayer ...
-
Electrophoretic co-deposition of PEEK-hydroxyapatite composite coatings for biomedical applications (ELSEVIER SCIENCE BV, 2018)This study focuses on the optimization of electrophoretic deposition (EPD) and suspension parameters for producing PEEK-hydroxyapatite (HA) coatings with feasible microstructure, adhesion strength, and in-vitro bioactivity. ...
-
(WILEY, 2018)In this paper, a systematic method has been developed to produce highly flexible and robust graphene/LiMn2O4 (G/LCMO) and graphene/LiCr0.05Mn1.95O4 (G/LMO) free-standing composite cathode electrodes with increased specific ...
-
(ELSEVIER SCIENCE BV, 2018)Electroless nickel-based depositions have been considered as one of the industrially effective methods because of their deposition uniformity, good corrosion properties, high wear resistance and good electrical properties. ...
-
(ELSEVIER SCIENCE BV, 2018)This study investigates the utilization of basalt in manufacturing machinable glass ceramics. As the fluorine and potassium phases, MgF2 and K2O added into basalt are responsible for the machinability of glass ceramics. ...
-
(WILEY, 2018)In this study, chitosan/bioactive glass (BG)/lawsone coatings were deposited by electrophoretic deposition (EPD) on polyetheretherketone (PEEK)/BG layers (previously deposited by EPD on 316-L stainless steel) to produce ...
-
Carbon-silicon composite anode electrodes modified with MWCNT for high energy battery applications (ELSEVIER SCIENCE BV, 2018)In this study, we comparatively study the electrochemical characteristics of Si, Si-C and vacuum-assisted filtration fabrication of a novel free-standing Si@C/Mutli Wall Carbon Nanotubes (MWCNT) nanocomposite. The surfaces ...
-
(WILEY, 2018)The cathode electrodes in commercial Li-ion cells are usually coated on aluminum foils, while the anode part is coated on copper current collector. However, these metallic foils of the electrodes are relatively heavy ...
-
(PERGAMON-ELSEVIER SCIENCE LTD, 2018)Electric current assisted sintering (ECAS) can be a new production method for high entropy alloy production due to its advantages such as low sintering temperature and short holding time. In this study, production of ...
-
(SPRINGER, 2018)In this study, diasporic bauxite was mechanically activated for different durations (15, 30, 60, 90 and 120 min) by the planetary mono mill. The speed of the main disk and ball-to-mass ratio were kept constant at 600 rev ...
-
(SPRINGER, 2018)Solid oxide fuel cell (SOFC) is a very efficient and clean source of energy. The glass and glass-ceramics are the most suitable and compatible sealing materials for SOFC. The crystallization kinetics of glass sealants is ...
-
(POLISH ACAD SCIENCES INST PHYSICS, 2018)Micro arc oxidized TiO2 coatings were prepared in different concentrations of (CH3COO)(2)Ca center dot H2O and different coating times on biomedical Ti6Al4V alloy. The surface topography, phase, and element composition of ...
-
(ELSEVIER SCIENCE SA, 2018)Chitosan, chitosan/45S5 bioactive glass (mBG), chitosan/nanobioglass (nBG), and chitosan/mBG/nBG coatings were deposited on grit-blasted and mirror-polished Ti6Al4 V alloy substrates by electrophoretic deposition (EPD). ...
-
(ELSEVIER SCIENCE BV, 2018)Due to their high specific capacities tin based electrode materials are in the focus of many researchers almost for a decade. However, tin based electrodes are hampered in practical applications due to the volumetric changes ...
-
(ELSEVIER SCIENCE BV, 2018)The effect of some commercial binders, carboxymethyl cellulose, polyvinylidene fluoride, modified styrene butadiene copolymer and vinylidene fluoride-hexafluoropropene copolymer on the capacitive performance of symmetric ...
-
(SPRINGER, 2018)In this study AlN nanowire was produced via direct nitridation (DN) method. In order to investigate the effect of nitridation on the formation of nanowire, elemental aluminum powder and ammonium chloride (NH4Cl) mixture ...
Now showing items 501-520 of 2863
DSpace@Sakarya by Sakarya University Institutional Repository is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 4.0 Unported License..
DSpace@Sakarya:
