EFFECT OF TITANIUM CONTENT ON THE MICROSTRUCTURE AND WEAR BEHAVIOR OF Fe(13-x)TixB7 (x=0-5) HARDFACING ALLOY

Kilinc, B.; Kocaman, E.; Sen, S.; Sen, U.

DSpace Home
→
Araştırma Çıktıları / Research Outputs
→
WOS İndeksli Yayınlar Koleksiyonu / WOS Indexed Publications Collection
→
View Item

dc.contributor.authors	Kilinc, B.; Kocaman, E.; Sen, S.; Sen, U.
dc.date.accessioned	2023-01-24T12:08:47Z
dc.date.available	2023-01-24T12:08:47Z
dc.date.issued	2022
dc.identifier.issn	1450-5339
dc.identifier.uri	http://dx.doi.org/10.2298/JMMB210430047K
dc.identifier.uri	https://hdl.handle.net/20.500.12619/99619
dc.description	Bu yayın 06.11.1981 tarihli ve 17506 sayılı Resmî Gazete’de yayımlanan 2547 sayılı Yükseköğretim Kanunu’nun 4/c, 12/c, 42/c ve 42/d maddelerine dayalı 12/12/2019 tarih, 543 sayılı ve 05 numaralı Üniversite Senato Kararı ile hazırlanan Sakarya Üniversitesi Açık Bilim ve Açık Akademik Arşiv Yönergesi gereğince telif haklarına uygun olan nüsha açık akademik arşiv sistemine açık erişim olarak yüklenmiştir.
dc.description.abstract	In this study, the effects of titanium addition on microstructure, hardness, and wear rate of Fe(13-x)TixB7 (x = 0, 1, 2, 3 and 5) based hard surface alloy layers formed by gas tungsten arc (GTA) welding method were investigated. As a result of the microstructure studies and phase analysis, it was determined that the structures of the coating layers consisted of alpha-Fe, alpha Fe+Fe2B eutectic, alpha-Fe+Fe2Ti eutectic and hard TiB2 phases. In the hard surface alloy layer, as the amount of titanium was increased, the TiB2 phase density formed in the system increased and it was observed that rod-like and long sharp edged phases formed from the equiaxed structure. As a result of wear tests performed at different loads, it was determined that the addition of titanium reduces the wear rates in the coating layers. In addition, scanning electron microscopy (SEM) images of the worn surfaces showed that the wear mechanisms were adhesive and oxidative.
dc.language	English
dc.language.iso	eng
dc.publisher	TECHNICAL FACULTY, BOR-SERBIA
dc.relation.isversionof	10.2298/JMMB210430047K
dc.subject	Metallurgy & Metallurgical Engineering
dc.subject	Hardfacing
dc.subject	Surface alloying
dc.subject	Fe-Ti-B alloy
dc.subject	Boride
dc.subject	Hardness
dc.subject	Wear
dc.title	EFFECT OF TITANIUM CONTENT ON THE MICROSTRUCTURE AND WEAR BEHAVIOR OF Fe(13-x)TixB7 (x=0-5) HARDFACING ALLOY
dc.type	Article
dc.identifier.volume	58
dc.identifier.startpage	29
dc.identifier.endpage	41
dc.relation.journal	JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY
dc.identifier.issue	1
dc.identifier.doi	10.2298/JMMB210430047K
dc.identifier.eissn	2217-7175
dc.contributor.author	Kilinc, B.
dc.contributor.author	Kocaman, E.
dc.contributor.author	Sen, S.
dc.contributor.author	Sen, U.
dc.relation.publicationcategory	Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rights.openaccessdesignations	gold