Açık Akademik Arşiv Sistemi
Browsing Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering by Subject "Metallurgy & Metallurgical Engineering"
- DSpace Home
- →
- Fakülteler / Faculties
- →
- Mühendislik Fakültesi
- →
- Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering
- →
- Browsing Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering by Subject
JavaScript is disabled for your browser. Some features of this site may not work without it.
Browsing Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering by Subject "Metallurgy & Metallurgical Engineering"
Now showing items 1-20 of 56
-
(PERGAMON-ELSEVIER SCIENCE LTD, 1997)
-
(ELSEVIER SCIENCE INC, 2007)In the present study, the effects of re-solution treatment of AA2618 aluminum alloy has been investigated. Solution heat treatments of 520-640 degrees C for 14-24 h were applied followed by artificial aging. Characterization ...
-
(ELSEVIER SCIENCE SA, 2015)Cycling stability of pure tin electrodes was aimed to improve by using suitable combination of nickel and multiwalled carbon nanotubes (MWCNTs). Nanocrystalline Sn-Ni/MWCNT composite was prepared by ultrasonic-pulse ...
-
(TANGER LTD, 2012)Plasma sprayed thermal barrier coatings (TBCs) are widely used in gas turbines to reduce thermal effect and increase turbine efficiency. Depending on the application of plasma spray coating, different characteristics are ...
-
(SPRINGER-VERLAG SINGAPORE PTE LTD, 2016)Hydroxyapatite (HA) is one of the most significant calcium phosphate bio-ceramic which is used commercially in biomedical application due to its similar structure with natural bone, bioactivity, and stability in body fluid. ...
-
(ELSEVIER SCIENCE SA, 2010)In this study, as an alloying element the effect of cobalt addition by 2.5 wt.% and 5 wt.% on the NiAl intermetallic compound produced by pressure-assisted combustion synthesis method was investigated. As starting materials ...
-
(ELSEVIER SCIENCE INC, 2008)Red mud is a waste and tail material from primary aluminum production, and is named for its color, coming from its iron oxide content. The quantity of red mud is almost equal to the primary aluminum production and leads ...
-
(CARL HANSER VERLAG, 2000)In this investigation. an attempt has been made to examine the wear response of some modified zinc-aluminum based alloys and two conventional bearing alloys at the sliding speeds of 0.65, 1.30 and 1.90 ms(-1), over a range ...
-
(TANGER LTD, 2016)Nickel is essential metal due to usage area as stainless steel, non-ferrous alloy production, electroplating and chemical industry. Degradation of nickel sulphides leads to extraction of nickel from laterites. High cost ...
-
(CARL HANSER VERLAG, 1998)The effect of copper addition in the range from 0 to 3 % on the tensile creep behaviour of gravity cast alloy ZA-8 has been investigated at a temperature of 120 degrees C and an applied stress of 40 MPa. It was found that ...
-
(CARL HANSER VERLAG, 2005)Multilayer TiAlN and AlN coatings were deposited from two targets onto high speed steel (HSS) and hard metal (HM) substrates by pulsed DC magnetron sputtering. TiAl target power was held constant while aluminum target power ...
-
(TAYLOR & FRANCIS LTD, 2009)The effects of mechanical activation on the soda roasting of chromite were investigated in this study. Structural changes in mechanically activated chromite were examined using X-ray diffraction analysis (XRD), surface ...
-
(CARL HANSER VERLAG, 2017)Aluminium-based powder metallurgy (PM) alloys have a number of advantages over cast and wrought aluminium alloys. These PM alloys can be produced using either prealloyed or elemental premixes, with the latter offering a ...
-
(CHINESE ACAD SCIENCES, INST METAL RESEARCH, 2018)TiO2 nanotubes on Ti metal surface were prepared by the electrochemical anodization method. Then, nanosilver was deposited onto the nanotubes by the electroless dip coating and the anodization. The obtained TiO2 nanotubes ...
-
(CHINESE ACAD SCIENCES, INST METAL RESEARCH, 2018)TiO2 nanotubes on Ti metal surface were prepared by the electrochemical anodization method. Then, nanosilver was deposited onto the nanotubes by the electroless dip coating and the anodization. The obtained TiO2 nanotubes ...
-
(SPRINGER, 2019)Given the excellent electrochemical and mechanical properties of graphene oxide (GO) and ceramic particles, excellent corrosion and tribological properties are expected when GO and TiO2 particles are incorporated into the ...
-
(REDAKCIA KOVOVE MATERIALY, 2004)The results obtained from experimental, statistical (best fit) and numerical studies were found to be in good agreement, and showed that a hyperbolic relationship existed between the density and pressure.
-
(CARL HANSER VERLAG, 2003)Molybdenum was deposited on cast-iron substrates using an air plasma spray system. The coated samples were characterized by optical microscopy, scanning electron microscopy, X-ray diffraction, image analyzing, and ...
-
(INST MATERIALS, 1998)Metal matrix composites were produced with modified pressure liquid infiltration equipment using short delta-Al2O3 (Saffil) fibre preforms, containing 10, 15, 20, 25, and 30 vol.-% fibres as reinforcement and the alloy ...
-
(ELSEVIER SCIENCE SA, 2017)Thermal barrier coatings (TBCs) were applied to gas turbines to function at higher gas temperatures. Extensive effort has been invested in identifying new materials with even better performance compared to yttria-stabilized ...
Now showing items 1-20 of 56
DSpace@Sakarya by Sakarya University Institutional Repository is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 4.0 Unported License..
DSpace@Sakarya:
