Açık Akademik Arşiv Sistemi
Browsing Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering by Subject "Chemistry"
- DSpace Home
- →
- Fakülteler / Faculties
- →
- Mühendislik Fakültesi
- →
- Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering
- →
- Browsing Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering by Subject
JavaScript is disabled for your browser. Some features of this site may not work without it.
Browsing Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering by Subject "Chemistry"
Now showing items 1-20 of 28
-
(SPRINGER, 2018)In this paper, the current, voltage and temperature of the container of an electric current-activated/assisted sintering (ECAS) system are measured and recorded with respect to time during the sintering process. By ...
-
(SPRINGER, 2018)In this paper, the current, voltage and temperature of the container of an electric current-activated/assisted sintering (ECAS) system are measured and recorded with respect to time during the sintering process. By ...
-
(WILEY-V C H VERLAG GMBH, 2019)The construction of all-solid-state batteries is now easier after the successful synthesis of sulfur-based solid electrolytes with extremely high ionic conductivities. Utilizing lithium metal as the anode in these batteries ...
-
(SPRINGER, 2018)Solid oxide fuel cell (SOFC) is a very efficient and clean source of energy. The glass and glass-ceramics are the most suitable and compatible sealing materials for SOFC. The crystallization kinetics of glass sealants is ...
-
(SPRINGER, 2018)Solid oxide fuel cell (SOFC) is a very efficient and clean source of energy. The glass and glass-ceramics are the most suitable and compatible sealing materials for SOFC. The crystallization kinetics of glass sealants is ...
-
(SPRINGER, 2018)In this study, diasporic bauxite was mechanically activated for different durations (15, 30, 60, 90 and 120 min) by the planetary mono mill. The speed of the main disk and ball-to-mass ratio were kept constant at 600 rev ...
-
(SPRINGER, 2018)In this study, diasporic bauxite was mechanically activated for different durations (15, 30, 60, 90 and 120 min) by the planetary mono mill. The speed of the main disk and ball-to-mass ratio were kept constant at 600 rev ...
-
(SPRINGER, 1998)The dehydration and decomposition bauxite mixed with alkaline compounds were investigated under dynamic and isothermal conditions. Alkaline compounds (CaO or/and Na2CO3) were added to bauxite samples in various mole fractions ...
-
(SPRINGER, 2017)In this study, mechanical activation process was used for intimate mixing as well as producing finely ground particles, increased surface area and improved chemical reactivity of milled materials for producing SrTiO3 from ...
-
(KLUWER ACADEMIC PUBL, 2000)An investigation was carried out on the kinetics of thermal decomposition of plumbo-jarosite. The kinetic models of dissociation of the compounds in the ore were identified. The results of the kinetic studies and the ...
-
(SPRINGER, 2018)In this study, as an alloying element, the effect of niobium addition by 5mass% on the TiAl3 matrix in situ composites produced by resistive sintering method was investigated. As starting materials, aluminum, titanium and ...
-
(SPRINGER, 2018)In this study, as an alloying element, the effect of niobium addition by 5mass% on the TiAl3 matrix in situ composites produced by resistive sintering method was investigated. As starting materials, aluminum, titanium and ...
-
(SPRINGER, 2016)The present study reports on film of ultra-high molecular weight polyethylene (UHMWPE) containing 1 mass% granite composite produced by gelation/crystallization technique at 150 A degrees C from decalin solution. The ...
-
(DE GRUYTER POLAND SP ZOO, 2018)Intermetallics are known as a group of materials that draws attention with their features such as ordered structure, high temperature resistance, high hardness and low density. In this paper, it is aimed to obtain intermetallic ...
-
(DE GRUYTER POLAND SP ZOO, 2018)Intermetallics are known as a group of materials that draws attention with their features such as ordered structure, high temperature resistance, high hardness and low density. In this paper, it is aimed to obtain intermetallic ...
-
(SPRINGER, 2016)The aim of this study was to investigate the effect of strontium (Sr) doping into hydroxyapatite (HA) powders. It is well known that strontium promotes bone formation, reduces bone resorption and it is used to treat ...
-
(SPRINGER, 2018)In the present work, CAS (CaO-Al2O3-SiO2)-based glass-ceramics were prepared by using Al2O3 (Seydisehir, Turkey) and pumice (Nevsehir, Turkey) as natural raw materials and marble dust (Sakarya, Turkey) as a waste source. ...
-
(SPRINGER, 2018)In the present work, CAS (CaO-Al2O3-SiO2)-based glass-ceramics were prepared by using Al2O3 (Seydisehir, Turkey) and pumice (Nevsehir, Turkey) as natural raw materials and marble dust (Sakarya, Turkey) as a waste source. ...
-
(SPRINGER, 2018)In this study, the influence of Bi2O3 on the crystallization kinetics of the MgO-Al2O3-SiO2-TiO2 glass ceramics system produced from industrial waste was investigated. The Bi2O3-added MgO-Al2O3-SiO2-TiO2 glass ceramics ...
-
(SPRINGER, 2018)In this study, the influence of Bi2O3 on the crystallization kinetics of the MgO-Al2O3-SiO2-TiO2 glass ceramics system produced from industrial waste was investigated. The Bi2O3-added MgO-Al2O3-SiO2-TiO2 glass ceramics ...
Now showing items 1-20 of 28
DSpace@Sakarya by Sakarya University Institutional Repository is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 4.0 Unported License..
DSpace@Sakarya:
