Glass fiber reinforced polymer (GRP) and needle reinforced polymer (NRP) composites have been used to produce a new kind of thin cross section liner for rehabilitation of in ground sewer pipes. The liner made from resin ...

Zn and Zn/Al 85/15 coatings are produced at optimum conditions by twin wire electric arc (TWEA) spraying technique and are used in various industrial applications to improve corrosion protection. As an alternative for Zn ...

SiC particle-reinforced metal matrix composites (MMCs) were produced by a common liquid-phase technique in two different melting routes. in the first route, 5, 10, 15 and 20 vol% SiC-reinforced A356-based MMCs were produced. ...

GGG-50, GGG-60 and GGG-80 ductile cast irons containing 0.01, 0.3 and 0.98 wt% copper, respectively, were boronized in a salt bath and then analyzed using optical microscopy, scanning electron microscopy and X-ray diffraction ...

In this study, fracture toughness properties of boronized ductile iron were investigated. Boronizing was realized in a salt bath consisting of borax, boric acid and ferro-silicon. Boronizing heat treatment was carried out ...

In this work, some surface properties of ductile cast irons were improved by boronizing thermo-chemical process. Boronizing was performed in a slurry salt bath consisting of borax, boric acid and ferro-silicon at 850degreesC ...

In recent years, the use of filler materials, such as red mud, in composites has increased. In this study, the use of industrial waste red mud as a filler material in an isotactic polypropylene (iPP) polymer-matrix composite ...

In this study, the effects of volume fraction of SiC on microstructure, hardness and tensile properties as well as density have been investigated in Al-4.5Cu-3Mg matrix alloy and its 5, 10, and 15 vol.% SiC particle ...

In this work, some surface properties of ductile irons were improved by a thermo-chemical boronizing process. Boronizing was performed in a slurry salt bath consisting of borax, boric acid and ferro-silicon at 850 and 950 ...