DSpace Home
→
Fakülteler / Faculties
→
Mühendislik Fakültesi
→
Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering
→
Browsing Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering by Author

Browsing Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering by Author "Kurnaz, Süleyman Can"

Now showing items 1-14 of 14

Comparison of the wear properties of modified ZA-8 alloys and conventional bearing bronze

Türk, Ahmet; Kurnaz, Süleyman Can; Şevik, Hüseyin (ELSEVIER SCI LTD, 2007)

In this study, an attempt has been made to examine the wear response of some modified Zn-Al based alloys and a conventional bearing bronze (SAE 660) at the sliding speeds of 0.5 ms(-1), I ms(-1), 1.3 ms(-1), 1.7 ms(-1) and ...
Hot tensile and fatigue behaviour of zinc-aluminum alloys produced by gravity and squeeze casting

Kurnaz, Süleyman Can (ELSEVIER SCI LTD, 2005)

The tensile and fatigue properties of zinc-aluminum alloys (ZA-8, ZA-12 and ZA-27) in squeeze and gravity cast forms have been investigated. Tensile tests were conducted at ambient and elevated temperatures up to 150 degrees ...
Influence of silver addition on the microstructure and mechanical properties of squeeze cast Mg-6Al-1Sn-0.3Mn-0.3Ti

Açıkgöz, Şehzat; Şevik, Hüseyin; Kurnaz, Süleyman Can (ELSEVIER SCIENCE SA, 2011)

In this study, the effect of silver (0, 0.2, 0.5, and 1 wt.%) on the microstructure and mechanical properties of a magnesium-based alloy (Mg-Al 6 wt.%-Sn 1 wt.%-Mn 0.3 wt.%-Ti 0.3 wt.%) were investigated. The alloys were ...
Influence of titanium and chromium addition on the microstructure and mechanical properties of squeeze cast Mg-6Al alloy

Kurnaz, Süleyman Can; Şevik, Hüseyin; Açıkgöz, Şehzat; Özel, Ahmet (ELSEVIER SCIENCE SA, 2011)

In this study, the effect of titanium and chromium (0, 0.1, 0.2, 0.3, and 0.4 wt%) on the microstructure, mechanical and wear properties of a magnesium-based alloy (Mg-Al 6 wt%) were investigated. The alloys were produced ...
Mechanical properties of saffil fiber reinforced zinc-aluminium alloy (ZA 27) produced by pressure die casting

Kurnaz, Süleyman Can; Durman, Mehmet (CARL HANSER VERLAG, 2005)

Conventional pressure die casting was used to produce ZA 27 alloy and zinc-aluminum composites with alumina short fibers (Saffil(TM)). While the Brinell hardness of the matrix alloy increased with increasing Saffil fiber ...
Modeling of tribological properties of alumina fiber reinforced zinc-aluminum composites using artificial neural network

Genel, Kenan; Kurnaz, Süleyman Can; Durman, Mehmet (ELSEVIER SCIENCE SA, 2003)

It is known that the strength of a metal, as well as wear resistance can be successfully improved by fiber reinforcement. In this study, multiple-layer feed-forward artificial neural network (ANN) modeling for tribological ...
Production of saffil fibre reinforced Zn-Al (ZA 12) based metal matrix composites using infiltration technique and study of their properties

Kurnaz, Süleyman Can (ELSEVIER SCIENCE SA, 2003)

In this study metal matrix composites of a zinc-aluminium based alloy (ZA-12) and short staple delta-alumina saffil fibres with volume fractions of 0.10, 0.15, 0.20 and 0.30 were produced using a liquid infiltration ...
Properties of alumina particulate reinforced aluminum alloy produced by pressure die casting

Şevik, Hüseyin; Kurnaz, Süleyman Can (ELSEVIER SCI LTD, 2006)

In this study, metal-matrix composites of an aluminum-silicon based alloy (LM6) and Al2O3 particles with volume fractions of 0.05, 0.10 and 0.15 and in size of 44, 85 and 125 mu m were produced using pressure die-casting ...
Response to Sha's comment on our article titled "Modeling of tribological properties of alumina fiber reinforced zinc-aluminum composites using artificial neural network"

Genel, Kenan; Kurnaz, Süleyman Can; Durman, Mehmet (ELSEVIER SCIENCE SA, 2004)
Temperature dependence of Young's Modulus of alumina short fiber reinforced Zn-Al MMCs produced by pressure die-casting

Kurnaz, Süleyman Can; Durman, Mehmet (CARL HANSER VERLAG, 2002)

Conventional pressure die-casting was used to produce delta-Al2O3 (Saffil) short fiber reinforced Zn-Al based metal matrix composites, containing 10, 15, 20, 25 and 30 vol.% fibers. The temperature dependence of the ...
The effect of process parameters on mullite-based plasma electrolytic oxide coatings

Kurnaz, Süleyman Can (ELSEVIER SCIENCE SA, 2008)

Thick, mullite-based plasma electrolytic oxide (PEO) coatings, designed for a combination of wear-protection and thermal protection, have been produced on 6082 aluminium alloy substrates under various conditions (electrolyte, ...
The effect of Ti-B and Sr on the mechanical behaviour of the zinc-aluminum-based ZA-12 alloy produced by gravity casting

Kurnaz, Süleyman Can; Şevik, Hüseyin; Türk, Ahmet; Özsaraç, Uğur (CARL HANSER VERLAG, 2006)

In this study, the effect of Ti-B (0.05-0.7 wt.% Ti, 0.01 - 0.13 wt.% B) and Sr additions (0.05-0.7 wt.%) on the hardness, ultimate tensile strength (UTS), strain and fatigue properties of the gravity cast Zn-Al-based ZA-12 ...
The effect of tin addition on the microstructure and mechanical properties of squeeze cast AM60 alloy

Şevik, Hüseyin; Açıkgöz, Şehzat; Kurnaz, Süleyman Can (ELSEVIER SCIENCE SA, 2010)

In this study, the effect of tin addition (0, 0.5,1, 2 and 4 wt% Sn) on the microstructure and mechanical properties of a magnesium-based alloy (AM60) were investigated. The alloys were produced under a controlled atmosphere ...
The Effects of Na2SiO3 Concentration on the Properties of Plasma Electrolytic Oxidation Coatings on 6060 Aluminum Alloy

Ayday, Aysun; Kumruoğlu, Levent Cenk; Kurnaz, Süleyman Can; Özel, Ahmet (SPRINGER, 2012)

In this study, 6060 aluminum alloy was coated by plasma electrolytic oxidation (PEO) process. The effect of sodium silicate concentration (A solution-7.5 g/L-B solution-15 g/L) on various morphological properties and ...