Açık Akademik Arşiv Sistemi

Browsing Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering by Author "Bindal, Cuma"

Browsing Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering by Author "Bindal, Cuma"

Sort by: Order: Results:

  • FABRICATION AND PROPERTIES OF SiC REINFORCED COPPER-MATRIX-COMPOSITE CONTACT MATERIAL 
    Çelebi Efe, Gözde Fatma; İpek, Mediha; Zeytin, Sakin; Bindal, Cuma (INST ZA KOVINSKE MATERIALE I IN TEHNOLOGIE, 2016)
    This study aims at improving mechanical properties of electrical contacts through copper and copper-matrix silicon-carbide reinforced composites produced with powder metallurgy. Copper powder was produced with the cementation ...
  • Formation and self-lubricating mechanisms of boric acid on borided steel surfaces 
    Bindal, Cuma (ELSEVIER SCIENCE SA, 1995)
    In this study, we investigated the formation and self-lubricating mechanisms of thin boron oxide and boric acid films on the surfaces of borided steel substrates. Specifically, we developed an annealing procedure which ...
  • Formation of ultralow friction surface films on boron carbide 
    Bindal, Cuma (AMER INST PHYSICS, 1996)
    In this letter, we describe the formation and ultralow friction mechanisms of a surface film on boron carbide (B4C). This film results from sequential reactions between B4C and oxygen and between the resulting boron oxide ...
  • Fracture Toughness of Alumina-Mullite Composites Produced by infiltration Process 
    Yılmaz, Şenol; Artır, Recep; Bindal, Cuma (2004)
  • Fracture toughness of boride formed on low-alloy steels 
    Bindal, Cuma (ELSEVIER SCIENCE SA, 1997)
    In this study, we investigated the fracture toughness of boride layers formed on steel surfaces, The samples used for this study were prepared from low-alloy and low-carbon steels essentially containing Cr and/or Mn as the ...
  • Hard iron boride (Fe2B) on 99.97wt% pure iron 
    Özdemir, Özkan; Bindal, Cuma (PERGAMON-ELSEVIER SCIENCE LTD, 2006)
    Some properties such as hardness and fracture toughness of boride formed on the 99.97 wt% pure iron were investigated. Boronizing was carried out in a solid medium, consisting of Ekabor powders of 5% B4C as donor, 5% KBF4 ...
  • IFMBE Proceedings 
    N. Sarica; M. E. Aksoy; M. Usta; Bindal, Cuma; A. H. Uecisik; O Dossel; Wc Schlegel (SPRINGER, 2009)
    In order to reveal the effect of reuse solution and the hemodialysis environment on the stability of high flux polyamide hollow fiber membranes, mechanical tests, surface and X-ray diffraction studies were performed on ...
  • IFMBE Proceedings 
    Bindal, Cuma (HEIDELBERGER PLATZ 3, D-14197 BERLIN, GERMANY, 2007)
    Biomaterials being natural or man-made are crucially important for comprising whole or part of living structures. In order to prolong the service life of biomaterials is of vital importance. In this research, the tribological ...
  • Investigation of Boronizing Kinetics of AISI 51100 Steel 
    İpek, Mediha; Çelebi Efe, Gözde Fatma; Özbek, İbrahim; Zeytin, Sakin; Bindal, Cuma (SPRINGER, 2012)
    In this study, some mechanical properties of borided AISI 51100 steel with high C concentration were investigated. Boronizing heat treatment was carried out in solid medium consisting of Ekabor-II at 850, 900, and 950 A ...
  • KEY ENGINEERING MATERIALS 
    Okumuş, Sefer Cem; Demirkıran, Ayşe Şükran; Bindal, Cuma; Yılmaz, Şenol (TRANS TECH PUBLICATIONS LTD, 2004)
    The present work deals with applicability of the fly ash (thermal power plant waste) as a coating onto the steel substrates by means of plasma spray coating technology. Plasma sprayed fly ash coatings obtained with and ...
  • KEY ENGINEERING MATERIALS 
    Artır, Recep; Yılmaz, Saim; Bindal, Cuma; Yılmaz, Şenol (TRANS TECH PUBLICATIONS LTD, 2004)
    The aim of this study is to investigate fracture toughness of alumina-mullite composites produced by infiltration process. Alumina-mullite composite samples were fabricated using a hydrolyzed ethyl silicate sol (TEOS) which ...
  • KEY ENGINEERING MATERIALS 
    Artır, Recep; Yılmaz, Saim; Bindal, Cuma; Yılmaz, Şenol (TRANS TECH PUBLICATIONS LTD, 2004)
    This work reports on some proper-ties and sintering behavior of B2O3 addition into fly ash in the range of 0 to 3 %. Cylindrical shaped samples were prepared by dry pressing uniaxially of fly ash containing B2O3 and as ...
  • KEY ENGINEERING MATERIALS 
    Bindal, Cuma; Zeytin, Sakin (TRANS TECH PUBLICATIONS LTD, 2003)
    In the present study, alumina ceramics containing 99% and 99.8% alumina, which has been studied and indicated reliable performance in vivo and vitro experiments for another ideas before this study, were subjected to the ...
  • KEY ENGINEERING MATERIALS 
    Şen, Şaduman; Şen, Uğur; Bindal, Cuma (TRANS TECH PUBLICATIONS LTD, 2004)
    The present study reports on boride layer growth kinetics of borided AISI 4140 steel. Steels were boronized in molten borax, boric acid and ferro-silicon bath at 1123degreesK 1173degreesK and 1223degreesK for 2, 4, 6 and ...
  • Kinetics of bonded AISI M2 high speed steel 
    Özbek, İbrahim; Bindal, Cuma (PERGAMON-ELSEVIER SCIENCE LTD, 2011)
    The present study reports on kinetics of bonded AISI M2 high speed steel. Boronizing thermochemical treatment was carried out in a solid medium consisting of EKabor powders at 850 degrees C, 900 degrees C and 950 degrees ...
  • Kinetics of Boride Layers Formed on the Surface of AISI 4140 Steel 
    Şen, Şaduman; Bindal, Cuma (2004)
  • Kinetics of borided 31CrMoV9 and 34CrAlNi7 steels 
    Çelebi Efe, Gözde Fatma; İpek, Mediha; Özbek, İbrahim; Bindal, Cuma (ELSEVIER SCIENCE INC, 2008)
    In this study, kinetics of borides formed on the surface of 31CrMoV9 and 34CrAlNi7 steels borided in solid medium consisting of Ekabor II at 850-900-950 degrees C for 2, 4, 6 and 8 h were investigated. Scanning electron ...
  • Kinetics of boriding AISI W1 steel 
    Özbek, İbrahim; Genel, Kenan; Bindal, Cuma (2003)
  • Kinetics of boriding of AISI W1 steel 
    Genel, Kenan; Özbek, İbrahim; Bindal, Cuma (ELSEVIER SCIENCE SA, 2003)
    A technologically interesting characteristic of boriding is the production of a hard, wear-resistant coating layer on the steel substrate. In this study, case properties of borided AISI W1 steel-has been investigated by ...
  • Mechanical behavior of borides formed on borided cold work tool steel 
    Şen, Şaduman; Özbek, İbrahim; Şen, Uğur; Bindal, Cuma (ELSEVIER SCIENCE SA, 2001)
    In this study, some mechanical properties of borided cold work low-alloy tool steels were investigated. Boronizing was performed in a solid medium consisting of Ekabor-I powders at 1000 degreesC for 2, 4 and 6 h. The ...