Açık Akademik Arşiv Sistemi

Browsing Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering by Author "Bindal, Cuma"

Browsing Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering by Author "Bindal, Cuma"

Sort by: Order: Results:

  • Biomimetric coating of monophasic brushite on Ti6Al4V in new m-5xSBF 
    Türk, Serbülent; Türk, Serbülent; Altınsoy, İbrahim; Çelebi Efe, Gözde Fatma; İpek, Mediha; Özacar, Mahmut; Bindal, Cuma (ELSEVIER SCIENCE SA, 2018)
    Ti6Al4V plates were exposed to soaking alkali treatment resulted in Na0.23TiO2 phase on the surface before realizing biomimetic Calcium-Phosphate (CaP) coating in prepared m-5xSBF and 5xSBF solutions at 37 degrees C and ...
  • Boriding response of AISI W1 steel and use of artificial neural network for prediction of borided layer properties 
    Genel, Kenan; Özbek, İbrahim; Kurt, Ali Vasfi; Bindal, Cuma (ELSEVIER SCIENCE SA, 2002)
    In the present study, boriding response of AISI W1 steel and prediction of boride layer properties were investigated by using artificial neural network (ANN). Boronizing heat treatment was carried out in a solid medium ...
  • Characterization of borided AISI 316L stainless steel implant 
    Özbek, İbrahim; Bindal, Cuma (PERGAMON-ELSEVIER SCIENCE LTD, 2002)
    The present study reports on characterization of borided AISI 316L stainless steel implant. Boronizing heat treatment was performed on a cylindrical bar of AISI 316L austenitic surgical stainless steel with a diameter of ...
  • Characterization of borides formed on impurity-controlled chromium-based low alloy steels 
    Bindal, Cuma (ELSEVIER SCIENCE SA, 1999)
    This study reports on characterization of borides formed on impurity-controlled steels essentially containing 0.3% C, 0.20 P, 0.5% Cr; 0.3% C, 0.02% P, and 1.0% Cr. The formation of borides on the impurity-controlled ...
  • Characterization of boriding of 0.3% C, 0.02% P plain carbon steel 
    Bindal, Cuma (PERGAMON-ELSEVIER SCIENCE LTD, 2007)
    In the present study, some mechanical properties of borides formed on the impurity-controlled plain carbon steel essentially containing 0.3% C, 0.02% P in weight was investigated. The formation of borides on the concerned ...
  • Characterization of cemented Cu matrix composites reinforced with SiC 
    Çelebi Efe, Gözde Fatma; Altınsoy, İbrahim; Yener, Tuba; İpek, Mediha; Zeytin, Sakin; Bindal, Cuma (PERGAMON-ELSEVIER SCIENCE LTD, 2010)
    In this study some properties of copper produced by cementation method and its composites reinforced with 1wt% 2wt% 3wt% and 5wt% SiC particles produced by powder metallurgy method were investigated Composite powders were ...
  • Characterization of cryogenic heat treated Vanadis 4 PM cold work tool steel 
    Altınsoy, İbrahim; İpek, Mediha; Zeytin, Sakin; Bindal, Cuma (PERGAMON-ELSEVIER SCIENCE LTD, 2011)
    The amount of retained austenite in the quenched cold work tool steel sample is 17.7%, in the condition of sub-zero heat treated and double tempered samples following by quenching is 1.9% determined by XRD analysis. The ...
  • Characterization of NiAl with cobalt produced by combustion synthesis 
    Özdemir, Özkan; Zeytin, Sakin; Bindal, Cuma (ELSEVIER SCIENCE SA, 2010)
    In this study, as an alloying element the effect of cobalt addition by 2.5 wt.% and 5 wt.% on the NiAl intermetallic compound produced by pressure-assisted combustion synthesis method was investigated. As starting materials ...
  • Characterization of Plasma Nitrided X32CrMoV33 Die Steel 
    Türk, Ahmet; Bindal, Cuma (TAYLOR & FRANCIS INC, 2009)
    In this study, nitriding behavior of plasma nitrided X32CrMoV33 die steel was investigated. Nitriding process was carried out at temperatures of 450, 500, and 550 degrees C for treatment time in the range of 2-32h. Depending ...
  • Characterization of transfer layers on steel surfaces sliding against diamond-like hydrocarbon films in dry nitrogen 
    Bindal, Cuma (ELSEVIER SCIENCE SA, 1995)
    Carbon-rich transfer layers on sliding contact surfaces play important roles in the tribological performance of diamond-like hydrocarbon (DLHC) films. In this study, we investigated the nature of these layers formed on M50 ...
  • Characterization of two-phase nickel aluminides produced by pressure-assisted combustion synthesis 
    Özdemir, Özkan; Zeytin, Sakin; Bindal, Cuma (PERGAMON-ELSEVIER SCIENCE LTD, 2007)
    Two-phase (B2 + L1(2)) nickel aluminide intermetallic compounds were synthesized by the pressure-assisted volume combustion synthesis (CS). The production and characterization of the samples containing NiAl + Ni3Al were ...
  • Characterization of UHWPE-TiO2 Composites Produced by Gelation/Crystallization Method 
    Çelebi Efe, Gözde Fatma; Bindal, Cuma; A. H. Ucisik (POLISH ACAD SCIENCES INST PHYSICS, 2017)
    In this study, ultra-high molecular weight polyethylene (UHMWPE) - TiO2 composites reinforced with TiO2 particles with weight ratios of 0.5, 1 and 2% were produced by gelation/crystallization method in decalin+antioxidant ...
  • Dielectric characterization of BSA doped-PANI interlayered metal-semiconductor structures 
    Nursel Karaoglan; Habibe Uslu Tecimer; Semsettin Altindal; Bindal, Cuma (SPRINGER, 2019)
    The measured capacitance and conductance-voltage (C & G/omega-V) data between 1 and 200 kHz of Al/(BSA-doped-PANI)/p-InP structure were examined to uncover real and imaginary components of complex permittivity (epsilon* = ...
  • Effect of Double Stage Nitriding on 34CrAlNi7-10 Nitriding Steel 
    Altınsoy, İbrahim; Çelebi Efe, Gözde Fatma; Yener, Tuba; K. G. Onder; Bindal, Cuma (POLISH ACAD SCIENCES INST PHYSICS, 2017)
    In this study, effect of double stage gas nitriding of 34CrAlNi7-10 steel was analyzed. Nitriding processes were carried out in two stages. in the first stage, samples were nitridied at 500 degrees C for 10 h and then in ...
  • Effect of particle size on microstructural and mechanical properties of UHMWPE-TiO2 composites produced by gelation and crystallization method 
    Çelebi Efe, Gözde Fatma; Altınsoy, İbrahim; Türk, Serbülent; Bindal, Cuma; A. Hikmet Ucisik (WILEY, 2019)
    In this study, Ultra-high-molecular-weight polyethylene (UHMWPE) in 0.5 wt % concentration-0.5, 1, and 2 wt % nanosized and micron-sized TiO2 composites were produced via gelation/crystallization method in decalin + ...
  • Effect of Solution and Calcination Time on Sol-gel Synthesis of Hydroxyapatite 
    Türk, Serbülent; Altınsoy, İbrahim; Gozde Celebi Efe; İpek, Mediha; Özacar, Mahmut; Bindal, Cuma (SPRINGER SINGAPORE PTE LTD, 2019)
    Nano-sized hydroxyapatite (HA) particles were synthesized by sol-gel through water and ethanol based mediums of phosphoric acid (H3PO4) and calcium hydroxide (Ca(OH)(2)) at pH = 11 for different calcination time (1 h, 2 ...
  • Effect of ZrO2 on phase transformation of Al2O3 
    İpek, Mediha; Zeytin, Sakin; Bindal, Cuma (ELSEVIER SCI LTD, 2010)
    This study investigates the effect of ZrO2 on phase transformation of alumina. Alumina and alumina-zirconia composite powders were produced by the precipitation method from aluminum sulfate and zirconium sulfate precursors. ...
  • Effects of SiC on Properties of Cu-SiC Metal Matrix Composites 
    Bindal, Cuma (AMER INST PHYSICS, 2011)
    This paper was focused on the effects of particle size and distribution on some properties of the SiC particle reinforced Cu composites. Copper powder produced by cementation method was reinforced with SiC particles having ...
  • Effects of SiC Particle Size on Properties of Cu-SiC Metal Matrix Composites 
    Çelebi Efe, Gözde Fatma; Altınsoy, İbrahim; İpek, Mediha; Zeytin, Sakin; Bindal, Cuma (POLISH ACAD SCIENCES INST PHYSICS, 2012)
    This paper was focused on the effects of particle size and distribution on some properties of the SiC particle reinforced Cu composites. Copper powder produced by cementation method was reinforced with SiC particles having ...
  • Evaluation of borides formed on AISI P20 steel 
    İpek, Mediha; Özdemir, Özkan; Bindal, Cuma; Cömert, Hüseyin (ELSEVIER SCI LTD, 2007)
    This study reports on an evaluation of borides formed on AIR P20 steel substrate. Boronizing was performed at 800, 875 and 950 degrees C for 2, 4, 6 and 8 h by using Ekabor 2 powders. The hardness of borides measured by ...