DSpace Home
→
Fakülteler / Faculties
→
Mühendislik Fakültesi
→
Makine Mühendisliği / Mechanical Engineering
→
Browsing Makine Mühendisliği / Mechanical Engineering by Subject

Browsing Makine Mühendisliği / Mechanical Engineering by Subject "Metallurgy & Metallurgical Engineering"

Now showing items 1-9 of 9

Corrosion fatigue behaviour of ion nitrided AISI 4140 steel

Genel, Kenan (ELSEVIER SCIENCE SA, 2000)

Machine components suffer from corrosion degradation of fatigue characteristics and improvement can be attained by the application of a nitriding treatment, particularly to low alloy steels. In the present study, the effect ...
Effect of ion nitriding on fatigue behaviour of AISI 4140 steel

Genel, Kenan (ELSEVIER SCIENCE SA, 2000)

Ion nitriding has become a popular thermo-chemical surface treatment, which is being used to develop fatigue and wear characteristics of steels. Besides the increased strength, the formation of high compressive residual ...
Evaluation of the sliding performance of polyamide, poly-oxy-methylene and their composites

Ünal, Hüseyin; Mimaroğlu, Abdullah (CARL HANSER VERLAG, 2013)

The friction and wear performance of cast polyamide, poly-oxy-methylene, 10 wt.% graphite filled polyamide 6, 10 wt.% graphite filled poly-oxy-methylene, and 10 wt.% graphite plus 6% wax filled polyamide 6 sliding against ...
Kinetics of boriding of AISI W1 steel

Genel, Kenan; Özbek, İbrahim; Bindal, Cuma (ELSEVIER SCIENCE SA, 2003)

A technologically interesting characteristic of boriding is the production of a hard, wear-resistant coating layer on the steel substrate. In this study, case properties of borided AISI W1 steel-has been investigated by ...
Modeling of tribological properties of alumina fiber reinforced zinc-aluminum composites using artificial neural network

Genel, Kenan; Kurnaz, Süleyman Can; Durman, Mehmet (ELSEVIER SCIENCE SA, 2003)

It is known that the strength of a metal, as well as wear resistance can be successfully improved by fiber reinforcement. In this study, multiple-layer feed-forward artificial neural network (ANN) modeling for tribological ...
Numerical investigation on torsional stress concentration factor at the semi elliptical corrosion pit

Cerit, Muhammet (PERGAMON-ELSEVIER SCIENCE LTD, 2013)

Under torsion, stress distribution at semi elliptical corrosion pits, secondary pit nucleated at the bottom of semi elliptical base pits and also orientation of the semi elliptical primary pits have been investigated by ...
Response to Sha's comment on our article titled "Modeling of tribological properties of alumina fiber reinforced zinc-aluminum composites using artificial neural network"

Genel, Kenan; Kurnaz, Süleyman Can; Durman, Mehmet (ELSEVIER SCIENCE SA, 2004)
The effect of pitting on the bending fatigue performance of high-strength aluminum alloy

Genel, Kenan (PERGAMON-ELSEVIER SCIENCE LTD, 2007)

The effect of pitting on the bending fatigue performance of high-strength aluminum alloy has been investigated by conducting a series of rotary bending fatigue tests at 95 Hz. From pitting corrosion studies, it was observed ...
Tribological properties of MgZrO3 coatings deposited by plasma spraying

Uçar, Vahdet; Demirkıran, Ayşe Şükran (REDAKCIA KOVOVE MATERIALY, 2008)

Because of thermal barrier properties, ceramic-based coatings are widely used for the design of components at high temperature applications. Therefore, 304 L stainless steel substrates were coated with MgZrO3 coatings using ...