DSpace Home
→
Fakülteler / Faculties
→
Mühendislik Fakültesi
→
Makine Mühendisliği / Mechanical Engineering
→
Browsing Makine Mühendisliği / Mechanical Engineering by Author

Browsing Makine Mühendisliği / Mechanical Engineering by Author "Şen, Uğur"

Now showing items 1-8 of 8

Abrasive wear behaviour of polymeric materials

Ünal, Hüseyin; Şen, Uğur; Mimaroğlu, Abdullah (ELSEVIER SCI LTD, 2005)

In this study the abrasive wear behaviour of aliphatic polyketone (APK), polyoxymethylene (POM), ultrahigh molecular weight polyethylene (UHMWPE), polyamide 66 (PA66), and 30% glass fibre reinforced polyphenylenesulfide ...
Abrasive wear volume maps for PA6 and PA6 composites under dry working condition

Mimaroğlu, Abdullah; Şen, Uğur; Ünal, Hüseyin (SPRINGER, 2008)

In this study the wear volume map is obtained and considered for evaluation of the abrasive wear performance for polyamide (PA6) and PA6 composites. Polyamide composites were tailored using 25 wt.% glass bead, 20 wt.% talc ...
An approach to friction and wear properties of polytetrafluoroethylene composite

Ünal, Hüseyin; Şen, Uğur; Mimaroğlu, Abdullah (ELSEVIER SCI LTD, 2006)

In this study, the effect of applied load and sliding speed on friction and wear behaviour of 25 wt% bronze filled polytetrafluoroethylene (PTFE) composite is experimentally examined and analytically analysed. Friction and ...
Dry sliding wear characteristics of some industrial polymers against steel counterface

Ünal, Hüseyin; Şen, Uğur; Mimaroğlu, Abdullah (ELSEVIER SCI LTD, 2004)

In this investigation, the influence of test speed and applied pressure values on the friction and wear behaviour of polyamide 66 (PA 66), polyoxymethylene (POM), ultrahigh molecular weight polyethylene (UHMWPE), 30% glass ...
Evaluation of the Performance of H3BO3-filled Polyamide Composite

Ünal, Hüseyin; Yetgin, Salih Hakan; Şen, Uğur; Mimaroğlu, Abdullah (SAGE PUBLICATIONS LTD, 2010)

In this study, the performance of boric acid (H3BO3)-filled polyamide composites were studied and evaluated at dry-sliding friction conditions. Wear tests were carried out using configuration of composite pin on a rotating ...
Study of abrasive wear volume map for PTFE and PTFE composites

Ünal, Hüseyin; Şen, Uğur; Mimaroğlu, Abdullah (SPRINGER, 2007)

The potential of this work is based on consideration of wear volume map for the evaluation of abrasive wear performance of polytetrafluoroethylene (PTFE) and PTFE composites. The fillers used in the composite are 25% bronze, ...
Tribological behaviors of SiO2 added polyester matrix thermosetting composites

Fırat, Mehmet; Akıncı, Akın; Özsoy, Murat; Şen, Uğur (2014)
Tribological Behaviors of SiO2 Added Polyester Matrix Thermosetting Composites

Akıncı, Akın; Özsoy, Murat; Fırat, Mehmet; Şen, Uğur (2013)