Açık Akademik Arşiv Sistemi

Influence of the addition of Cr2O3 and SiO2 on the tribological performance of alumina ceramics

Show simple item record

dc.contributor.authors Mimaroglu, A; Taymaz, I; Ozel, A; Arslan, S;
dc.date.accessioned 2020-10-16T11:46:16Z
dc.date.available 2020-10-16T11:46:16Z
dc.date.issued 2003
dc.identifier.citation Mimaroglu, A; Taymaz, I; Ozel, A; Arslan, S; (2003). Influence of the addition of Cr2O3 and SiO2 on the tribological performance of alumina ceramics. SURFACE & COATINGS TECHNOLOGY, 169, 407-405
dc.identifier.issn 0257-8972
dc.identifier.uri https://hdl.handle.net/20.500.12619/70194
dc.description.abstract Although ceramic materials are widely selected in the design of components for high engineering applications, the manufacture of ceramic components is quite different to that of metallic or polymer materials. The original material, the type of the sinter additive and sinter conditions, can modify the mechanical, chemical and tribological properties of a ceramic component. For instance, in hot press process of alumina ceramic, additional compounds are added to decrease the sintering temperature of the material, which means a decrease in manufacturing time and cost. In this investigation we studied and explored the influence of additional compounds, load and test speed values on the friction and wear performance of alumina ceramic. Wear tests using a pin-on-disc machine were carried out for pure alumina and alumina samples contained 3 wt.% SiO2 and 1.5 wt.% Cr2O3 addition compounds. Test conditions covered 0.5 and 1 m/s speeds and 2.5, 5 and 10 N loads. The specific wear rates were deduced from mass loss. The wear rate for pure alumina was between 8 X 10(-8) and 8 X 10(-7) mm(2)/N, while the wear rate values for alumina with Cr2O3 + SiO2 were in the order of 10(-6) mm(2)/N. Moreover, the wear rate showed more sensitivity to the applied load, particularly at low sliding speeds. (C) 2003 Elsevier Science B.V. All rights reserved.
dc.language English
dc.publisher ELSEVIER SCIENCE SA
dc.subject Physics
dc.title Influence of the addition of Cr2O3 and SiO2 on the tribological performance of alumina ceramics
dc.type Proceedings Paper
dc.identifier.volume 169
dc.identifier.startpage 405
dc.identifier.endpage 407
dc.contributor.department Sakarya Üniversitesi/Mühendislik Fakültesi/Makine Mühendisliği Bölümü
dc.contributor.saüauthor Mimaroğlu, Abdullah
dc.contributor.saüauthor Taymaz, İmdat
dc.contributor.saüauthor Özel, Ahmet
dc.contributor.saüauthor Arslan, Serhat
dc.relation.journal SURFACE & COATINGS TECHNOLOGY
dc.identifier.wos WOS:000183289100097
dc.contributor.author Mimaroğlu, Abdullah
dc.contributor.author Taymaz, İmdat
dc.contributor.author Özel, Ahmet
dc.contributor.author Arslan, Serhat


Files in this item

Files Size Format View

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record