Açık Akademik Arşiv Sistemi

Dry sliding wear characteristics of some industrial polymers against steel counterface

Show simple item record

dc.contributor.authors Unal, H; Sen, U; Mimaroglu, A;
dc.date.accessioned 2020-10-16T11:45:25Z
dc.date.available 2020-10-16T11:45:25Z
dc.date.issued 2004
dc.identifier.citation Unal, H; Sen, U; Mimaroglu, A; (2004). Dry sliding wear characteristics of some industrial polymers against steel counterface. TRIBOLOGY INTERNATIONAL, 37, 732-727
dc.identifier.issn 0301-679X
dc.identifier.uri https://doi.org/10.1016/j.triboint.2004.03.002
dc.identifier.uri https://hdl.handle.net/20.500.12619/70145
dc.description.abstract In this investigation, the influence of test speed and applied pressure values on the friction and wear behaviour of polyamide 66 (PA 66), polyoxymethylene (POM), ultrahigh molecular weight polyethylene (UHMWPE), 30% glass fibre reinforced polyphenylene-sulfide (PPS + 30%GFR) and aliphatic polyketone (APK) polymers were studied. Friction and wear tests of PA 66, POM, UHMWPE, PPS + 30%GFR and APK versus AISI D2 steel were carried out at dry condition on a pin-on-disc arrangement. Tribological tests were performed at room temperature at different pressures (0.35-1.05 MPa) and sliding speeds (0.5-2.0 m/s). The results showed that, for all polymers used in this investigation, the coefficient of friction decreases linearly with the increase in pressure. The specific wear rate for UHMWPE, PPS + 30%GFR and APK were in the order of 10(-5) mm(3)/N in, while the wear rate value for PA 66 was in the order of 10(-6) mm(3)/N in. In addition to this, the wear rate value for POM was in the order of 10(-3) mm(3)/N in. Furthermore, as the results of this investigation, the wear rate showed very little sensitivity to the applied pressures and test speed. (C) 2004 Elsevier Ltd. All rights reserved.
dc.language English
dc.publisher ELSEVIER SCI LTD
dc.subject Engineering
dc.title Dry sliding wear characteristics of some industrial polymers against steel counterface
dc.type Article
dc.identifier.volume 37
dc.identifier.startpage 727
dc.identifier.endpage 732
dc.contributor.department Sakarya Uygulamalı Bilimler Üniversitesi/Teknoloji Fakültesi/Metalurji Ve Malzeme Mühendisliği Bölümü
dc.contributor.saüauthor Ünal, Hüseyin
dc.contributor.saüauthor Şen, Uğur
dc.contributor.saüauthor Mimaroğlu, Abdullah
dc.relation.journal TRIBOLOGY INTERNATIONAL
dc.identifier.wos WOS:000222791300006
dc.identifier.doi 10.1016/j.triboint.2004.03.002
dc.identifier.eissn 1879-2464
dc.contributor.author Ünal, Hüseyin
dc.contributor.author Şen, Uğur
dc.contributor.author Mimaroğlu, Abdullah


Files in this item

Files Size Format View

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record