Açık Akademik Arşiv Sistemi

Study of abrasive wear volume map for PTFE and PTFE composites

Show simple item record

dc.contributor.authors Unal, H; Sen, U; Mimaroglu, A;
dc.date.accessioned 2020-10-16T11:43:42Z
dc.date.available 2020-10-16T11:43:42Z
dc.date.issued 2007
dc.identifier.citation Unal, H; Sen, U; Mimaroglu, A; (2007). Study of abrasive wear volume map for PTFE and PTFE composites. APPLIED COMPOSITE MATERIALS, 14, 306-287
dc.identifier.issn 0929-189X
dc.identifier.uri https://doi.org/10.1007/s10443-007-9047-x
dc.identifier.uri https://hdl.handle.net/20.500.12619/70089
dc.description.abstract The potential of this work is based on consideration of wear volume map for the evaluation of abrasive wear performance of polytetrafluoroethylene (PTFE) and PTFE composites. The fillers used in the composite are 25% bronze, 35% graphite and 17% glass fibre glass (GFR). The influence of filler materials, abrasion surface roughness and applied load values on abrasive wear performance of PTFE and PTFE composites were studied and evaluated. Experimental abrasive wear tests were carried out at atmospheric condition on pin-on-disc wear tribometer. Tests were performed under 4, 6, 8 and 10 N load values, travelling speed of 1 m/sec and abrasion surface roughness values of 5, 20 and 45 mu m. Wear volume maps were obtained and the results showed that the lowest wear volume rate for PTFE is reached using GFR filler. Furthermore, the results also showed that the higher is the applied load and the roughness of the abrasion surface, the higher is the wear rate. Finally it is also concluded that abrasive wear process mechanism include ploughing and cutting mechanisms.
dc.language English
dc.publisher SPRINGER
dc.subject Materials Science
dc.title Study of abrasive wear volume map for PTFE and PTFE composites
dc.type Article
dc.identifier.volume 14
dc.identifier.startpage 287
dc.identifier.endpage 306
dc.contributor.department Sakarya Uygulamalı Bilimler Üniversitesi/Teknoloji Fakültesi/Metalurji Ve Malzeme Mühendisliği Bölümü
dc.contributor.saüauthor Ünal, Hüseyin
dc.contributor.saüauthor Şen, Uğur
dc.contributor.saüauthor Mimaroğlu, Abdullah
dc.relation.journal APPLIED COMPOSITE MATERIALS
dc.identifier.wos WOS:000254234000001
dc.identifier.doi 10.1007/s10443-007-9047-x
dc.contributor.author Ünal, Hüseyin
dc.contributor.author Şen, Uğur
dc.contributor.author Mimaroğlu, Abdullah


Files in this item

Files Size Format View

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record