Açık Akademik Arşiv Sistemi

Wear Behavior of Bronze Hybrid MMCs Coatings Produced by Current Sintering on Steel Substrates

Show simple item record

dc.contributor.authors Karslioglu, R; Uysal, M; Alp, A; Akbulut, H;
dc.date.accessioned 2020-10-16T11:41:04Z
dc.date.available 2020-10-16T11:41:04Z
dc.date.issued 2010
dc.identifier.citation Karslioglu, R; Uysal, M; Alp, A; Akbulut, H; (2010). Wear Behavior of Bronze Hybrid MMCs Coatings Produced by Current Sintering on Steel Substrates. TRIBOLOGY TRANSACTIONS, 53, 785-779
dc.identifier.issn 1040-2004
dc.identifier.uri https://doi.org/10.1080/10402004.2010.485741
dc.identifier.uri https://hdl.handle.net/20.500.12619/69996
dc.description.abstract In this work, a bronze matrix (90 wt% Cu + 10 wt% Sn) was reinforced with SiC and graphite particulates using mechanical alloying and a subsequent current sintering technique. The mechanically ball-milled bronze hybrid matrix composite powders reinforced with 5.0 wt% SiC and 5.0 wt% graphite were cold-compacted on a 1040 steel substrate under a pressure of 300 MPa. The compacted structure was sintered at atmospheric conditions to nearly a full density within 10 min using current sintering, in which the powders were heated by a low voltage and high current and compressed simultaneously. The samples were sintered at three different applied currents (1,500, 1,700, and 1,900 A) to provide dense and well-bonded coatings on steel substrates. Microhardness testing and optical and scanning electron microscopes (SEM) were used for microstructural characterization of the hybrid composites. The tribological characterization of the resulting composites was tested by a block-on-disk method for determination of the wear loss and friction coefficient behaviors against a steel disk. It was pointed out that increasing applied current during the sintering/coating process resulted in obtaining high-hardness and wear-resistant hybrid composite coatings.
dc.language English
dc.publisher TAYLOR & FRANCIS INC
dc.subject Engineering
dc.title Wear Behavior of Bronze Hybrid MMCs Coatings Produced by Current Sintering on Steel Substrates
dc.type Article
dc.identifier.volume 53
dc.identifier.startpage 779
dc.identifier.endpage 785
dc.contributor.department Sakarya Üniversitesi/Mühendislik Fakültesi/Metalurji Ve Malzeme Mühendisliği Bölümü
dc.contributor.saüauthor Karslıoğlu, Ramazan
dc.contributor.saüauthor Alp, Ahmet
dc.contributor.saüauthor Akbulut, Hatem
dc.relation.journal TRIBOLOGY TRANSACTIONS
dc.identifier.wos WOS:000208975300005
dc.identifier.doi 10.1080/10402004.2010.485741
dc.identifier.eissn 1547-397X
dc.contributor.author Karslıoğlu, Ramazan
dc.contributor.author Alp, Ahmet
dc.contributor.author Akbulut, Hatem


Files in this item

Files Size Format View

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record