Açık Akademik Arşiv Sistemi

The Influence of Micro- and Nano-Filler Content on the Mechanical Properties of Epoxy Composites

Show simple item record

dc.contributor.authors Ozsoy, I; Demirkol, A; Mimaroglu, A; Unal, H; Demir, Z;
dc.date.accessioned 2020-02-26T08:46:02Z
dc.date.available 2020-02-26T08:46:02Z
dc.date.issued 2015
dc.identifier.citation Ozsoy, I; Demirkol, A; Mimaroglu, A; Unal, H; Demir, Z; (2015). The Influence of Micro- and Nano-Filler Content on the Mechanical Properties of Epoxy Composites. STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 61, 609-601
dc.identifier.issn 0039-2480
dc.identifier.uri https://doi.org/10.5545/sv-jme.2015.2632
dc.identifier.uri https://hdl.handle.net/20.500.12619/49914
dc.description.abstract In this study, the influence of micro-and nano-filler content on the mechanical properties of epoxy composites was studied. The matrix material is epoxy; the micro-fillers are Al2O3, TiO2 and fly ash added in 10 wt% to 30 wt% by weight ratio; the nano-fillers are Al2O3, TiO2 and clay added in 2.5 wt% to 10 wt% by weight ratio. Test samples were prepared using an open mould type die. Tensile, three-point bending and hardness tests were carried out. The tensile strength, elastic modulus, elongation at break, flexural strength, flexural modulus, and the hardness of the composite materials were obtained and evaluated. The results show that the tensile strength, flexural strength and elongation at the break values of composites decreased while the tensile modulus and flexural modulus increased with the increasing micro-and nano-filler content ratio.
dc.language English
dc.publisher ASSOC MECHANICAL ENGINEERS TECHNICIANS SLOVENIA
dc.subject Engineering
dc.title The Influence of Micro- and Nano-Filler Content on the Mechanical Properties of Epoxy Composites
dc.type Article
dc.identifier.volume 61
dc.identifier.startpage 601
dc.identifier.endpage 609
dc.contributor.department Sakarya Üniversitesi/Mühendislik Fakültesi/Makine Mühendisliği Bölümü
dc.contributor.saüauthor Özsoy, Mehmet İskender
dc.contributor.saüauthor Demirkol, Aşkın
dc.contributor.saüauthor Mimaroğlu, Abdullah
dc.contributor.saüauthor Ünal, Hüseyin
dc.contributor.saüauthor Demir, Zafer
dc.relation.journal STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING
dc.identifier.wos WOS:000371228800006
dc.identifier.doi 10.5545/sv-jme.2015.2632
dc.contributor.author Özsoy, Mehmet İskender
dc.contributor.author Demirkol, Aşkın
dc.contributor.author Mimaroğlu, Abdullah
dc.contributor.author Ünal, Hüseyin
dc.contributor.author Demir, Zafer


Files in this item

Files Size Format View

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record