The production of intermetallic compound was carried out in an electrical resistance furnace in open air under 150 MPa uniaxial pressure at 1050 degrees C for 1 hour using aluminum powder with 15 mu m size and Carbonyl-nickel ...

In this study mechanical properties of copper were enhanced by adding 1 wt.%, 2 wt.%, 3 wt.% and 5 wt.% SiC particles into the matrix. SiC particles of having 1 mu m, 5 mu m and 30 mu m sizes were used as reinforcement. ...

In this study, CoCrFeNiTi0.5Alx high-entropy alloys were produced by induction melting and their dry sliding wear behavior was examined at different temperatures. In addition to face-centered cubic (FCC) phases, low amounts ...

The amount of retained austenite in the quenched cold work tool steel sample is 17.7%, in the condition of sub-zero heat treated and double tempered samples following by quenching is 1.9% determined by XRD analysis. The ...

Two-phase (B2 + L1(2)) nickel aluminide intermetallic compounds were synthesized by the pressure-assisted volume combustion synthesis (CS). The production and characterization of the samples containing NiAl + Ni3Al were ...

CoCrFeNiAlxTiy high-entropy alloys were produced by the induction melting method and their oxidation behavior investigated when exposed to 1000 degrees C for different durations. One or more body-centered cubic phases were ...

A recently developed powder metallurgy processing technique - Electric Current Activated (Assisted) Sintering (ECAS) was employed to produce intermetallic Nb-NbAl3 composites. In this study, to produce Nb-NbAl3 in-situ ...

This paper was focused on the effects of particle size and distribution on some properties of the SiC particle reinforced Cu composites. Copper powder produced by cementation method was reinforced with SiC particles having ...

This study aims at improving mechanical properties of electrical contacts through copper and copper-matrix silicon-carbide reinforced composites produced with powder metallurgy. Copper powder was produced with the cementation ...