Açık Akademik Arşiv Sistemi

Browsing Makale Koleksiyonu by Title

Browsing Makale Koleksiyonu by Title

Sort by: Order: Results:

  • A study on kinetics of CrxC coated high chromium steel by thermo reactive diffusion technique 
    Şen, Şaduman (2005)
  • A study on kinetics of CrxC-coated high-chromium steel by thermo-reactive diffusion technique 
    Şen, Şaduman (PERGAMON-ELSEVIER SCIENCE LTD, 2005)
    There are a lot of technologically interesting characteristics of chromium carbide coating deposited by pack method which is the production of hard, wear-resistant, oxidation- and corrosion-resistant coating layer on the ...
  • A study on NiAl produced by pressure-assisted combustion synthesis 
    Özdemir, Özkan; Zeytin, Sakin; Bindal, Cuma (PERGAMON-ELSEVIER SCIENCE LTD, 2009)
    The production of intermetallic compound was carried out in an electrical resistance furnace in open air under 150 MPa uniaxial pressure at 1050 degrees C for 1 hour using aluminum powder with 15 mu m size and Carbonyl-nickel ...
  • A study on the re-solution heat treatment of AA 2618 aluminum alloy 
    Özbek, İbrahim (ELSEVIER SCIENCE INC, 2007)
    In the present study, the effects of re-solution treatment of AA2618 aluminum alloy has been investigated. Solution heat treatments of 520-640 degrees C for 14-24 h were applied followed by artificial aging. Characterization ...
  • A tribological comparison of pure and boronized chromium 
    Bindal, Cuma (ASME, 2006)
    Boronized metals are potential candidate materials for various industrial applications as well as for joint arthroplasty. This is due to their high hardness and corrosion resistance. In the present research, we investigated ...
  • Ab initio calculations and experimental determination of the structure of Cr2AlC 
    Üstel, Fatih (2004)
  • Abrasive wear behaviour of liquid crystal polymer polyamide and polyphenylenesulfide polymer composites 
    Özel, Ahmet (FREUND PUBLISHING HOUSE LTD, 2006)
    In this study the abrasive wear behaviour of liquid crystal polymer (LCP), glass reinforced polyamide 46 (PA 46+30%GFR), and 30% glass fibre reinforced polyphenylenesulfide (PPS+30%GFR) engineering polymers were studied ...
  • Abrasive wear behaviour of polymeric materials 
    Ünal, Hüseyin; Şen, Uğur; Mimaroğlu, Abdullah (ELSEVIER SCI LTD, 2005)
    In this study the abrasive wear behaviour of aliphatic polyketone (APK), polyoxymethylene (POM), ultrahigh molecular weight polyethylene (UHMWPE), polyamide 66 (PA66), and 30% glass fibre reinforced polyphenylenesulfide ...
  • Abrasive wear volume maps for PA6 and PA6 composites under dry working condition 
    Mimaroğlu, Abdullah; Şen, Uğur; Ünal, Hüseyin (SPRINGER, 2008)
    In this study the wear volume map is obtained and considered for evaluation of the abrasive wear performance for polyamide (PA6) and PA6 composites. Polyamide composites were tailored using 25 wt.% glass bead, 20 wt.% talc ...
  • ACCELERATED CORROSION BEHAVIORS OF Zn, Al AND Zn/15Al COATINGS ON A STEEL SURFACE 
    Cevher, Özgür; Türk, Ahmet; Üstel, Fatih; Yılmaz, Fevzi (INST ZA KOVINSKE MATERIALE I IN TEHNOLOGIE, 2011)
    Zn, Al and Zn/15Al coatings can be produced in optimum conditions by the twin wire arc (TWEA) spraying technique. The coatings are used for corrosion protection in a variety of industrial applications. In this study, the ...
  • Active and inactive buffering effect on the electrochemical behavior of Sn-Ni/MWCNT composite anodes prepared by pulse electrodeposition for lithium-ion batteries 
    Uysal, Mehmet; Çetinkaya, Tuğrul; Alp, Ahmet; Akbulut, Hatem (ELSEVIER SCIENCE SA, 2015)
    Cycling stability of pure tin electrodes was aimed to improve by using suitable combination of nickel and multiwalled carbon nanotubes (MWCNTs). Nanocrystalline Sn-Ni/MWCNT composite was prepared by ultrasonic-pulse ...
  • ADHESION PROPERTIES OF THE PLASMA SPRAY COATINGS 
    Altuncu, Ekrem; Üstel, Fatih (TANGER LTD, 2012)
    Plasma sprayed thermal barrier coatings (TBCs) are widely used in gas turbines to reduce thermal effect and increase turbine efficiency. Depending on the application of plasma spray coating, different characteristics are ...
  • Advanced Materials Research 
    Yılmaz, Fevzi; Akıncı, Akın (TRANS TECH PUBLICATIONS LTD, 2010)
    Glass fiber reinforced polymer (GRP) and needle reinforced polymer (NRP) composites have been used to produce a new kind of thin cross section liner for rehabilitation of in ground sewer pipes. The liner made from resin ...
  • Advanced Structured Materials 
    F. E. Bastan; O. Karaarslan; Erdoğan, Garip; Üstel, Fatih; A Ochsner; H Altenbach (SPRINGER-VERLAG SINGAPORE PTE LTD, 2016)
    Hydroxyapatite (HA) is one of the most significant calcium phosphate bio-ceramic which is used commercially in biomedical application due to its similar structure with natural bone, bioactivity, and stability in body fluid. ...
  • AIP Conference Proceedings 
    Toçoğlu, Ubeyd; Cevher, Özgür; Akbulut, Hatem; Ay Oral; Zbb Oral; Me Akoz; M Sezer; Kol, Suat (AMER INST PHYSICS, 2016)
    In this study tin-multi walled carbon nanotube (Sn-MWCNT) lithium ion battery anodes were produced and their electrochemical galvanostatic charge/discharge tests were conducted at various (25 degrees C, 35 degrees C, 50 ...
  • AIP Conference Proceedings 
    Ateş, Asude; U. Onen; Ercenk, Ediz; Yılmaz, Şenol; Ay Oral; Zbb Oral; M Sezer; Kol, Suat; Me Akoz (AMER INST PHYSICS, 2017)
    Basalt based glass-ceramics were prepared by conventional melt-quenching technique and subsequently converted to glass-ceramics by a controlled nucleation and crystallization process. Glass materials were obtained by melt ...
  • AIP Conference Proceedings 
    U. Gunay; Öztürk, Mahpeyker; Ercenk, Ediz; Yılmaz, Şenol; Ay Oral; Zbb Oral; M Sezer; Kol, Suat; Me Akoz (AMER INST PHYSICS, 2017)
    In the current study, the effect of particle size and velocity on solid particle erosive wear properties of glass-ceramics produced from cast basalt was investigated. The samples sectioned as the size of 50 x 50 x 12 mm ...
  • Al-Si/B4C composite coatings on Al-Si substrate by plasma spray technique 
    Sarıkaya, Özkan; Aslanlar, Salim; Okumuş, Sefer Cem (ELSEVIER SCI LTD, 2007)
    Plasma-sprayed coatings of Al-Si/B4C have been prepared on Al-Si piston alloys for diesel engine motors. The Al-Si/B4C composite powders including 5-25 wt% B4C were prepared by mixing and ball-milling processes. These ...
  • An approach to friction and wear properties of polytetrafluoroethylene composite 
    Ünal, Hüseyin; Şen, Uğur; Mimaroğlu, Abdullah (ELSEVIER SCI LTD, 2006)
    In this study, the effect of applied load and sliding speed on friction and wear behaviour of 25 wt% bronze filled polytetrafluoroethylene (PTFE) composite is experimentally examined and analytically analysed. Friction and ...
  • An approach to kinetic study of borided steels 
    Şen, Şaduman; Bindal, Cuma (2005)