Açık Akademik Arşiv Sistemi

Performance Evaluation of Nickel Separation and Extraction Process from Simulated Spent Cr/Ni Electroplating Bath Solutions by ELM Process Using LIX63 and PC88A

Show simple item record

dc.contributor.authors Eyupoglu, V; Kumbasar, RA; Isik, M;
dc.date.accessioned 2020-02-26T07:56:19Z
dc.date.available 2020-02-26T07:56:19Z
dc.date.issued 2015
dc.identifier.citation Eyupoglu, V; Kumbasar, RA; Isik, M; (2015). Performance Evaluation of Nickel Separation and Extraction Process from Simulated Spent Cr/Ni Electroplating Bath Solutions by ELM Process Using LIX63 and PC88A. JOURNAL OF DISPERSION SCIENCE AND TECHNOLOGY, 36, 1319-1309
dc.identifier.issn 0193-2691
dc.identifier.uri https://doi.org/10.1080/01932691.2014.974813
dc.identifier.uri https://hdl.handle.net/20.500.12619/48823
dc.description.abstract The study was conducted to investigate synergistic extraction of nickel from simulated spent Cr-Ni electroplating bath solutions by emulsion liquid membrane (ELM) process using 5,8-diethyl-7-hydroxydodecan-6-one oxime (LIX 63) and 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (PC88A) as carriers. The importance of ELM composition and the properties of simulated spent electroplating bath solution have been optimized to synergistically extract nickel. The important parameters affecting the nickel extraction efficiency and ELM stability, such as acid concentration, stripping solution type and concentration, extractant concentration, surfactant concentration, and phase ratio, were experimentally studied. Along with obtained results, higher than 99% of nickel was selectively extracted within 30 minutes from simulated electroplating bath solutions that their metal concentrations was in the range of 100-500 mg/L. in the optimum conditions. The higher separation factor value of nickel over chromium (beta(Ni/Cr)) was obtained as 898. As a result, the nickel extraction kinetic was found to depend on PC88A, since extraction mechanism of PC88A is slower than that of LIX63. So, the combined use of LIX63 and PC88A improved the selective extraction of nickel in that process.
dc.language English
dc.publisher TAYLOR & FRANCIS INC
dc.subject Chemistry
dc.title Performance Evaluation of Nickel Separation and Extraction Process from Simulated Spent Cr/Ni Electroplating Bath Solutions by ELM Process Using LIX63 and PC88A
dc.type Article
dc.identifier.volume 36
dc.identifier.startpage 1309
dc.identifier.endpage 1319
dc.contributor.saüauthor Eyüpoğlu, Volkan
dc.contributor.saüauthor Kumbasar, Recep Ali
dc.contributor.saüauthor Işık, Mahir
dc.relation.journal JOURNAL OF DISPERSION SCIENCE AND TECHNOLOGY
dc.identifier.wos WOS:000353142100014
dc.identifier.doi 10.1080/01932691.2014.974813
dc.identifier.eissn 1532-2351
dc.contributor.author Eyüpoğlu, Volkan
dc.contributor.author Kumbasar, Recep Ali
dc.contributor.author Işık, Mahir


Files in this item

Files Size Format View

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record