Browsing Mühendislik Fakültesi by Author "Fındık, Fehim"

Now showing items 1-13 of 13

An expert system based material selection approach to manufacturing

İpek, Mümtaz; Selvi, İhsan Hakan; Fındık, Fehim; Torkul, Orhan; Cedimoğlu, İsmail Hakkı (ELSEVIER SCI LTD, 2013)

Selection of proper materials for a diverse mechanism is one of the hardest tasks in the design and product improvements in various industrial applications. Materials play a vital and important function during the entire ...
Effects of Sintering Temperature and Time on the Properties of Al-Cu PM Alloy

Gökçe, Azim; Fındık, Fehim; Kurt, Ali Osman (CARL HANSER VERLAG, 2017)

Aluminium-based powder metallurgy (PM) alloys have a number of advantages over cast and wrought aluminium alloys. These PM alloys can be produced using either prealloyed or elemental premixes, with the latter offering a ...
Extension in Shelf Life of Fresh Food Using Nanomaterials Food Packages

Fındık, Fehim; Ünal, Hüseyin; Mimaroğlu, Abdullah (TAYLOR & FRANCIS INC, 2012)

In this study, the use of nanocomposite polyethylene films to extend shelf life of food products and to enhance its barrier and mechanical properties was investigated. Nanocomposite was designated 80% wt LLDPE, 14.28% wt ...
Friction and wear behaviour of implanted AISI 316L SS and comparison with a substrate

Fındık, Fehim; Morgül, Ömer Kadir (ELSEVIER SCI LTD, 2002)

Ion implantation creates alterations in surface composition or morphology of solids which yield to a modification of physical and especially mechanical properties;, such as hardness and modulus of elasticity. The aim of ...
Influence of Process Parameters on the Mechanical and Foaming Properties of PP Polymer and PP/TALC/EPDM Composites

Ünal, Hüseyin; Mimaroğlu, Abdullah; Fındık, Fehim (TAYLOR & FRANCIS INC, 2013)

In this study, PP and Talc/EPDM/PP composite materials are used. Foaming process is achieved by a conventional injection molding method. The influence of injection pressure and melting temperature on the average cell ...
Influence of Process Parameters on the Mechanical and Foaming Properties of PP Polymer and PP/TALC/EPDM Composites

Yetgin, Salih Hakan; Ünal, Hüseyin; Mimaroğlu, Abdullah; Fındık, Fehim (2013)
Mechanical behavior of nylon composites containing talc and kaolin

Ünal, Hüseyin; Fındık, Fehim; Mimaroğlu, Abdullah (JOHN WILEY & SONS INC, 2003)

Particulate reinforced thermoplastic composites are designed to improve the properties and to lower the overall cost of engineering plastics. In this study, the influence of adding talc and kaolin fillers on the mechanical ...
Mechanical properties and electrochemical behavior of porous Ti-Nb biomaterials

Yılmaz, Eren; Gökçe, Azim; Fındık, Fehim; Hamit Ozkan Gulsoy; İyibilgin, Osman (ELSEVIER SCIENCE BV, 2018)

Ti-Nb-based alloys - with their superior mechanical properties and biocompatibility - are attractive biomaterials for orthopedic implants. By producing this alloys with a porous structure, it is possible to achieve mechanical ...
METAL MATRIX COMPOSITES

Fındık, Fehim; Bindal, Cuma (1996)
Microstructural examination and properties of premixed Al-Cu-Mg powder metallurgy alloy

Gökçe, Azim; Fındık, Fehim; Kurt, Ali Osman (ELSEVIER SCIENCE INC, 2011)

This paper reports the experimental findings on the development of the premixed elemental Al5Cu and Al5Cu0.5Mg powder metallurgy alloys. Aluminum powder was mixed with copper and magnesium powders in a macro- and a micro-level ...
Sintering and aging behaviours of Al4CuXMg PM alloy

Gökçe, Azim; Fındık, Fehim; Kurt, Ali Osman (TAYLOR & FRANCIS LTD, 2016)

Sintering and aging behaviours of Al-Cu-Mg powder metallurgy (PM) alloy produced from elemental powders were examined. After evaluating results from thermal analysis, tests were carried out on Al-4Cu alloys with magnesium ...
The wear behaviour investigation of sliding bearings with a designed testing machine

Özsaraç, Uğur; Fındık, Fehim; Durman, Mehmet (ELSEVIER SCI LTD, 2007)

In this study, firstly a new wear testing machine was designed and produced in the university in order to investigate the wear behaviour of conventionally used sliding bearing alloys. Secondly, the wear tests of these ...
Tribological properties of coated ASME 316L SS and comparison with a substrate

Fındık, Fehim; Morgül, Ömer Kadir (EMERALD GROUP PUBLISHING LTD, 2002)

Coating is a process applied to surface of materials to have thermal insulation, hot corrosion, erosion and oxidation resistance. Due to their combination of high hardness and chemical stability thin titanium nitride and ...