In this study, the general purpose Finite Element Code, ABAQUS, with a non-linear solution has been employed to study the neck profile in drawn polymers. Attempts are made to obtain the relationship between the neck profile, ...

In this study, the general purpose Finite Element Code, ABAQUS, with a non-linear solution has been employed to study the neck profile in drawn polymers. Attempts are made to obtain the relationship between the neck profile, ...

Surface preparation techniques such as plasma spraying, physical vapour deposition and chemical vapour deposition have been used to make convenient material combinations for the use in high-technology requirements. ...

In this study experimental work was carried out to obtain and to control the strain hardening behaviour of ductile cast iron by austempering process. Tensile test, hardness test and micrography examinations were carried ...

In this paper, coupled (thermal and structure) finite element analysis has been employed to analyze the influence of interlayer material and geometry in MgO.ZrO2-GG coatings subjected to thermal loading. coatings with NiAl, ...

Alumina is widely selected in the design of components for high engineering applications mainly because of its high wear resistance, high compressive strength, low specific density and high temperature capability. Processing ...

Although ceramic materials are widely selected in the design of components for high engineering applications, the manufacture of ceramic components is quite different to that of metallic or polymer materials. The original ...

In this study, the effect of titanium and chromium (0, 0.1, 0.2, 0.3, and 0.4 wt%) on the microstructure, mechanical and wear properties of a magnesium-based alloy (Mg-Al 6 wt%) were investigated. The alloys were produced ...

In this investigation, the mechanical properties of silver nitrate nanoparticles filled polypropylene composite is evaluated. The silver nitrate particles are added to the matrix by 1, 3, 5, and 10% by weight. The composite ...

Surface modification of AISI 4140 steel has been carried out by using electrolytic plasma thermocyclic treatment (EPTT). Cyclic voltage between 320 and 250 for stipulated period of 1, 2, 3, 4 s and 2, 3, 4, 5 s, respectively, ...