Browsing Mühendislik Fakültesi by Author "Karslıoğlu, Ramazan"

Now showing items 1-14 of 15

Comparison microstructure and sliding wear properties of nickel-cobalt/CNT composite coatings by DC, PC and PRC current electrodeposition

Karslıoğlu, Ramazan; Akbulut, Hatem (ELSEVIER, 2015)

Nickel-cobalt (Ni-Co) alloys and Ni-Co/multiwalled carbon nanotube (MWCNT) composite coatings were prepared under direct current (DC), pulse current (PC) and pulse reverse current (PRC) methods. The effect of different ...
Electrical contact performance of various electro-deposited graphene reinforced silver-based nanocomposites

Karslıoğlu, Ramazan; Lujain Al-Falahi (CARL HANSER VERLAG, 2020)

Silver and silver(Ag)-graphene(Gr) nanocomposite coatings were prepared via direct current, pulse current and pulse reverse current on copper electrical contacts for evaluating electrical contact performance. The effects ...
Nanostructured core-shell Ni deposition on SiC particles by alkaline electroless coating

Uysal, Mehmet; Karslıoğlu, Ramazan; Alp, Ahmet; Akbulut, Hatem; Uysal, Mehmet (ELSEVIER, 2011)

In this study, core-shell nanostructured nickel formation on silicon carbide (SiC) ceramic powders was achieved through the electroless deposition method using alkaline solutions. To produce a nano core-shell Ni deposition ...
Reciprocating Wear Behavior of Ni-Co Alloys Produced by Pulse Current Electrodeposition

Uysal, Mehmet; Karslıoğlu, Ramazan; Uysal, Mücteba; Alp, Ahmet; Akbulut, Hatem (POLISH ACAD SCIENCES INST PHYSICS, 2013)

In the present work, Ni-Co alloy coatings were prepared from a modified Watt type electrolyte by direct current. For this purpose, current density was investigated for optimization to obtain high quality coatings on the ...
Rod- and wire-like morphologies of tin oxide developed with plasma oxidation after electrodeposition

Uysal, Mehmet; Karslıoğlu, Ramazan; Güler, Mehmet Oğuz; Alp, Ahmet; Akbulut, Hatem; Uysal, Mehmet (ELSEVIER SCIENCE BV, 2009)

A new manufacturing method has been developed to prepare films composed of Sn-rich SnO2 wires and rods using electrodeposition and subsequent plasma oxidation of pure Sn. The morphology of Sn-rich tin oxide grains varied ...
Rod- and wire-like morphologies of tin oxide developed with plasma oxidation after electrodeposition

Karslıoğlu, Ramazan (2009)
The effect of substrate temperature on the electrical and optic properties of nanocrystalline tin oxide coatings produced by APCVD

Karslıoğlu, Ramazan; Uysal, Mehmet; Akbulut, Hatem; Uysal, Mehmet (ELSEVIER SCIENCE BV, 2011)

Tin oxide thin films were grown by atmospheric pressure chemical vapor deposition (APCVD) on glass substrates at temperatures of 400, 500 and 600 C with various deposition times from 15 to 60 min with 15 min time intervals. ...
The effect of substrate temperature on the electrical and optic properties of nanocrystalline tin oxide coatings produced by APCVD

Karslıoğlu, Ramazan (2011)
The effect of substrate temperature on the microstructural properties of nanocrystalline tin oxide coatings produced by APCVD

Karslıoğlu, Ramazan; Alp, Ahmet; Akbulut, Hatem (SPRINGER, 2010)

Tin oxide thin films were grown by chemical vapor deposition on glass substrates at atmospheric pressure and temperatures of 400, 500, and 600A degrees C over deposition times from 15 to 60 min with 15-min intervals to ...
The effect of substrate temperature on the microstructural properties of nanocrystalline tin oxide coatings produced by APCVD

Karslıoğlu, Ramazan; Alp, Ahmet; Akbulut, Hatem (SPRINGER, 2010)

Tin oxide thin films were grown by chemical vapor deposition on glass substrates at atmospheric pressure and temperatures of 400, 500, and 600A degrees C over deposition times from 15 to 60 min with 15-min intervals to ...
Thermal Expansion and Thermal Conductivity Behaviors of Al-Si/SiC/graphite Hybrid Metal Matrix Composites (MMCs)

Okumuş, Sefer Cem; Aslan, Serdar; Karslıoğlu, Ramazan; Gültekin, Deniz; Akbulut, Hatem (KAUNAS UNIV TECH, 2012)

Aluminum-silicon based hybrid composites reinforced with silicon carbide and graphite particles were prepared by liquid phase particle mixing (melt stirring) and squeeze casting. The thermal expansion and thermal conductivity ...
Thermal Expansion and Thermal Conductivity Behaviors of Al-Si/SiC/graphite Hybrid Metal Matrix Composites (MMCs)

Akbulut, Hatem; Aslan, Serdar; Karslıoğlu, Ramazan (2012)
Thermal Expansion and Thermal Conductivity Behaviors of Al-Si/SiC/graphite Hybrid Metal Matrix Composites (MMCs)

Karslıoğlu, Ramazan (2012)
Wear Behavior of Bronze Hybrid MMCs Coatings Produced by Current Sintering on Steel Substrates

Karslıoğlu, Ramazan; Alp, Ahmet; Akbulut, Hatem (TAYLOR & FRANCIS INC, 2010)

In this work, a bronze matrix (90 wt% Cu + 10 wt% Sn) was reinforced with SiC and graphite particulates using mechanical alloying and a subsequent current sintering technique. The mechanically ball-milled bronze hybrid ...