- DSpace Home
- →
- Fakülteler / Faculties
- →
- Recent submissions
JavaScript is disabled for your browser. Some features of this site may not work without it.
Fakülteler / Faculties: Recent submissions
Now showing items 461-480 of 8225
-
(TAYLOR & FRANCIS INC, 2012)In this study, fine grained SiO2 was exposed to CRN, and then Si3N4 ceramic powders were produced. Initially, 5wt% Li2O-5 wt% Y2O3 (based on the final product) and carbon black were added to SiO2, and then powder samples ...
-
(SPRINGER, 2012)In this study, some mechanical properties of borided AISI 51100 steel with high C concentration were investigated. Boronizing heat treatment was carried out in solid medium consisting of Ekabor-II at 850, 900, and 950 A ...
-
(SPRINGER, 2012)The friction and wear performance of pure LDPE and 10%, 30%, 50% and 70% basalt filled (by wt) LDPE composite were comparatively evaluated under dry sliding conditions. Wear tests were carried out at room temperature under ...
-
(ELSEVIER SCI LTD, 2012)In this study mechanical properties of copper were enhanced by adding 1 wt.%, 2 wt.%, 3 wt.% and 5 wt.% SiC particles into the matrix. SiC particles of having 1 mu m, 5 mu m and 30 mu m sizes were used as reinforcement. ...
-
(SPRINGER, 2012)The non-isothermal kinetics of mullite formation from both non-activated and mechanically activated kaolinite + alumina ceramic system have been studied by differential thermal analysis (DTA). The mixture of kaolinite and ...
-
(ELSEVIER SCI LTD, 2012)SiC particulate-reinforced copper composites were prepared by powder metallurgy (PM) method and conventional atmospheric sintering. Scanning electron microscope (SEM), X-ray diffraction (XRD) techniques were used to ...
-
(ELSEVIER SCI LTD, 2012)In this study, the effects of impact angle and SiC reinforcement on the erosion wear behavior of basalt base glass and glass-ceramic coatings were investigated. Basalt powders with 0-50% SiC additions were coated on AISI ...
-
(INST ZA KOVINSKE MATERIALE I IN TEHNOLOGIE, 2012)The twin-wire electrical arc spraying (TWAS) process is widely used for worn-out surface restoration and the corrosion protection of metallic constructions. The industrial benefit of arc spray coatings is the possibility ...
-
(ELSEVIER SCIENCE SA, 2015)The effects of two different reinforcements of WC and graphene on the structural and tribological properties of copper matrix were investigated. Cu/WC, Cu/graphene and hybrid Cu/WC/graphene nanocomposites were co-deposited ...
-
(ELSEVIER SCI LTD, 2015)SnO2 nanoparticles were synthesized by sol-gel method with different sol concentrations and the effect of sol concentration on the structural properties of SnO2 was investigated. The aim of this work is synthesizing of ...
-
(ELSEVIER SCIENCE BV, 2015)Nickel-graphene metal matrix composite coatings were fabricated by pulse electrodeposition technique from a Watt's type electrolyte. Effect of the graphene concentration in the electrolyte on the microstructure, microhardness, ...
-
(ELSEVIER SCI LTD, 2015)In this study, a strategy used to design high capacity, Cu coated LiCr2/3V1/6Mn1/6O2 electrodes for lithium-ion batteries is discussed. The advantages of the LiCr2/3V1/6Mn1/6O2 component and its influence on the structural ...
-
(TANGER, 2015)In this study, ZnO/MWCNT nanocomposites are produced by magnetron sputtering radio frequency (RF) plasma process as anode materials for Li-ion batteries. The physical, structural, and electrochemical behaviors of the ...
-
(ELSEVIER, 2015)Tin-Nickel/multiwalled carbon nanotube (MWCNT) composite plating was performed using a pyrophosphate bath. To reduce irreversible capacity and improve cycle performance of tin electrodes, Sn-Ni/MWCNT nanocomposite electrodes ...
Now showing items 461-480 of 8225
DSpace@Sakarya by Sakarya University Institutional Repository is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 4.0 Unported License..
DSpace@Sakarya:
