DSpace Home
→
Fakülteler / Faculties
→
Browsing Fakülteler / Faculties by Author

Browsing Fakülteler / Faculties by Author "Sakarya Üniversitesi/Mühendislik Fakültesi/Metalurji Ve Malzeme Mühendisliği Bölümü"

Now showing items 1-20 of 506

2H-MoS(2)as an Artificial Solid Electrolyte Interface in All-Solid-State Lithium-Sulfur Batteries

Kızılaslan, Abdulkadir; Çetinkaya, Tuğrul; Akbulut, Hatem (WILEY, 2020)

All-solid-state lithium-ion batteries are considered the next-generation energy storage systems. However, certain problems arise from the degradation of anode-electrolyte interface hindering their use especially when lithium ...
A comparative study of borided pure niobium, tungsten and chromium

Özbek, İbrahim; Bindal, Cuma (PERGAMON-ELSEVIER SCIENCE LTD, 2006)

Pure niobium (Nb), tungsten (W) and chromium (Cr) were boronized at 940 degrees C for 2, 4 and 8h. The borided samples were characterized by X-ray diffraction, Scanning electron microscope and microhardness tests. Tribological ...
A comparative study of borided pure niobium, tungsten and chromium

Bindal, Cuma; Özbek, İbrahim (2006)
A comparison of As-cast and heat treated properties in short fiber reinforced Al-Si piston alloys

Akbulut, Hatem; Durman, Mehmet; Yılmaz, Fevzi (PERGAMON-ELSEVIER SCIENCE LTD, 1997)
A comparison of borided AISI 316L and AISI 304 stainless steels

Özbek, İbrahim; Bindal, Cuma (2002)
A comparison of borides formed on AISI 1040 and AISI P20 steels

İpek, Mediha; Çelebi Efe, Gözde Fatma; Özdemir, Özkan; Bindal, Cuma; Cömert, Hüseyin (ELSEVIER SCI LTD, 2007)

In this study, some properties of borides formed on the AISI 1040 and AISI P20 steel substrates were investigated. Boronizing was performed at 800, 875, and 950 degrees C for 2, 4, 6, and 8 h by using Ekabor 2 powders. The ...
A different method for producing a flexible LiMn2O4/MWCNT composite electrode for lithium ion batteries

Çetinkaya, Tuğrul; Akbulut Uludağ, Ahsen; Güler, Mehmet Oğuz; Akbulut, Hatem (VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS, 2014)

A flexible lithium manganese oxide (LiMn2O4)/multi-wall carbon nanotube (MWCNT) composite electrode was produced by casting a slurry-containing powdered LiMn2O4 on a previously prepared MWCNT paper. The structure of this ...
A mechanical aspect of borides formed on the AISI 440C stainless-steel

Özbek, İbrahim; Şen, Şaduman; İpek, Mediha; Bindal, Cuma; Zeytin, Sakin (PERGAMON-ELSEVIER SCIENCE LTD, 2004)

In the present study, some properties of borides formed on AISI 440C stainless-steel have been investigated. Boronizing was carried out in a solid medium consisting of EKabor(R) powder at a temperature of 950degreesC for ...
A novel approach for wear and corrosion resistance in the electroless Ni-P-W alloy with CNFs co-depositions

A. Akyol; Algül, Hasan; Uysal, Mehmet; Akbulut, Hatem; Alp, Ahmet (ELSEVIER SCIENCE BV, 2018)

Electroless nickel-based depositions have been considered as one of the industrially effective methods because of their deposition uniformity, good corrosion properties, high wear resistance and good electrical properties. ...
A novel approach for wear and corrosion resistance in the electroless Ni-P-W alloy with CNFs co-depositions

A. Akyol; Algül, Hasan; Uysal, Mehmet; Akbulut, Hatem; Alp, Ahmet (ELSEVIER SCIENCE BV, 2018)

Electroless nickel-based depositions have been considered as one of the industrially effective methods because of their deposition uniformity, good corrosion properties, high wear resistance and good electrical properties. ...
A reciprocating wear study on the effect of surfactant concentration and sliding speed in the electro codeposited Ni/SiCp metal matrix composites

Harun Gul; Uysal, Mehmet; Akbulut, Hatem; Alp, Ahmet (SAGE PUBLICATIONS LTD, 2016)

In this present work, Ni/SiC metal matrix composite coatings were prepared from a modified Watt's type electrolyte containing nano-SiC suspended particles by direct current plating method to increase the wear resistance ...
A study on kinetics of CrxC coated high chromium steel by thermo reactive diffusion technique

Şen, Şaduman (2005)
A study on kinetics of CrxC-coated high-chromium steel by thermo-reactive diffusion technique

Şen, Şaduman (PERGAMON-ELSEVIER SCIENCE LTD, 2005)

There are a lot of technologically interesting characteristics of chromium carbide coating deposited by pack method which is the production of hard, wear-resistant, oxidation- and corrosion-resistant coating layer on the ...
A study on the re-solution heat treatment of AA 2618 aluminum alloy

Özbek, İbrahim (ELSEVIER SCIENCE INC, 2007)

In the present study, the effects of re-solution treatment of AA2618 aluminum alloy has been investigated. Solution heat treatments of 520-640 degrees C for 14-24 h were applied followed by artificial aging. Characterization ...
A tribological comparison of pure and boronized chromium

Bindal, Cuma (ASME, 2006)

Boronized metals are potential candidate materials for various industrial applications as well as for joint arthroplasty. This is due to their high hardness and corrosion resistance. In the present research, we investigated ...
Ab initio calculations and experimental determination of the structure of Cr2AlC

Üstel, Fatih (2004)
Abrasive wear behaviour of liquid crystal polymer polyamide and polyphenylenesulfide polymer composites

Özel, Ahmet (FREUND PUBLISHING HOUSE LTD, 2006)

In this study the abrasive wear behaviour of liquid crystal polymer (LCP), glass reinforced polyamide 46 (PA 46+30%GFR), and 30% glass fibre reinforced polyphenylenesulfide (PPS+30%GFR) engineering polymers were studied ...
ACCELERATED CORROSION BEHAVIORS OF Zn, Al AND Zn/15Al COATINGS ON A STEEL SURFACE

Cevher, Özgür; Türk, Ahmet; Üstel, Fatih; Yılmaz, Fevzi (INST ZA KOVINSKE MATERIALE I IN TEHNOLOGIE, 2011)

Zn, Al and Zn/15Al coatings can be produced in optimum conditions by the twin wire arc (TWEA) spraying technique. The coatings are used for corrosion protection in a variety of industrial applications. In this study, the ...
Active and inactive buffering effect on the electrochemical behavior of Sn-Ni/MWCNT composite anodes prepared by pulse electrodeposition for lithium-ion batteries

Uysal, Mehmet; Çetinkaya, Tuğrul; Alp, Ahmet; Akbulut, Hatem (ELSEVIER SCIENCE SA, 2015)

Cycling stability of pure tin electrodes was aimed to improve by using suitable combination of nickel and multiwalled carbon nanotubes (MWCNTs). Nanocrystalline Sn-Ni/MWCNT composite was prepared by ultrasonic-pulse ...
Advanced Structured Materials

F. E. Bastan; O. Karaarslan; Erdoğan, Garip; Üstel, Fatih; A Ochsner; H Altenbach (SPRINGER-VERLAG SINGAPORE PTE LTD, 2016)

Hydroxyapatite (HA) is one of the most significant calcium phosphate bio-ceramic which is used commercially in biomedical application due to its similar structure with natural bone, bioactivity, and stability in body fluid. ...