Pure niobium (Nb), tungsten (W) and chromium (Cr) were boronized at 940 degrees C for 2, 4 and 8h. The borided samples were characterized by X-ray diffraction, Scanning electron microscope and microhardness tests. Tribological ...

In the present study, the effects of re-solution treatment of AA2618 aluminum alloy has been investigated. Solution heat treatments of 520-640 degrees C for 14-24 h were applied followed by artificial aging. Characterization ...

In this study, the influences of B4C ratios on some mechanical and physical properties such as relative density, microhardness and electrical properties of cold pressed Cu-B4C composites were investigated. Curve fitting ...

In the present study, boriding response of AISI W1 steel and prediction of boride layer properties were investigated by using artificial neural network (ANN). Boronizing heat treatment was carried out in a solid medium ...

The present study reports on characterization of borided AISI 316L stainless steel implant. Boronizing heat treatment was performed on a cylindrical bar of AISI 316L austenitic surgical stainless steel with a diameter of ...

The present study reports on kinetics of bonded AISI M2 high speed steel. Boronizing thermochemical treatment was carried out in a solid medium consisting of EKabor powders at 850 degrees C, 900 degrees C and 950 degrees ...

A technologically interesting characteristic of boriding is the production of a hard, wear-resistant coating layer on the steel substrate. In this study, case properties of borided AISI W1 steel-has been investigated by ...

In this study, some mechanical properties of borided cold work low-alloy tool steels were investigated. Boronizing was performed in a solid medium consisting of Ekabor-I powders at 1000 degreesC for 2, 4 and 6 h. The ...