DSpace Home
→
Fakülteler / Faculties
→
Mühendislik Fakültesi
→
İnşaat Mühendisliği / Civil Engineering
→
Browsing İnşaat Mühendisliği / Civil Engineering by Author

Browsing İnşaat Mühendisliği / Civil Engineering by Author "Sakarya Uygulamalı Bilimler Üniversitesi/Teknoloji Fakültesi/İnşaat Mühendisliği Bölümü"

Now showing items 1-12 of 20

Application of trend analysis and artificial neural networks methods: The case of Sakarya River

Çeribaşı, Gökmen; Doğan, Emrah; U. Akkaya; U. E. Kocamaz (SHARIF UNIV TECHNOLOGY, 2017)

Various artificial intelligence techniques are used in order to make prospective estimations with available data. The most common and applied method among these artificial intelligence techniques is Artificial Neural ...
APPLICATION OF TREND ANALYSIS METHOD ON RAINFALL STREAM FLOW-SUSPENDED LOAD DATAS OF WEST AND EAST BLACK SEA BASINS AND SAKARYA BASIN

Çeribaşı, Gökmen; Doğan, Emrah (PARLAR SCIENTIFIC PUBLICATIONS (P S P), 2016)

In hydraulic engineering, it is of vital importance to estimate suspended load correctly in planning and projecting stream structures. On the other hand, problems increase with the effect of heating and climate changes in ...
Design of a short tensile coupon for fiber reinforced plastic using artificial neural networks

Sarıbıyık, Mehmet; Çağlar, Naci; Fırat, Seyhan (WALTER DE GRUYTER GMBH, 2005)

The measurement of the mechanical properties of Fibre Reinforced Plastic (FRP) material is necessary for numerical structural analysis and design. The mechanical properties of the FRP materials may be determined by specific ...
Effect of pre-setting pressure applied to mechanical behaviours of reactive powder concrete during setting phase

İpek, Metin; Yılmaz, Kemalettin; Sümer, Mensur; Sarıbıyık, Mehmet; İpek, Mediha (ELSEVIER SCI LTD, 2011)

In this study, mixing rates, fiber content and pre-setting pressure of reactive powder concrete (RPC) were examined. Mixing ratios were determined by different mixing techniques in literature using material characteristics ...
EVALUATION OF METEOROLOGICAL AND HYDROLOGICAL DATA OF SAPANCA BASIN BY TREND ANALYSIS METHOD

Çeribaşı, Gökmen; Doğan, Emrah; Sönmez, Osman (SCIBULCOM LTD, 2014)

In this study, according to the data obtained from the monitoring stations in the Sapanca basin, trend analysis is applied to the meteorological and hydrological data of the lake Sapanca such as temperature, surface ...
EVALUATION OF SAKARYA RIVER STREAMFLOW AND SEDIMENT TRANSPORT WITH RAINFALL USING TREND ANALYSIS

Çeribaşı, Gökmen; Doğan, Emrah; Sönmez, Osman (PARLAR SCIENTIFIC PUBLICATIONS (P S P), 2013)

Water has always been the focus of living things and civilizations have been established mainly in areas close to water. However, to meet the growing need for water, measures were taken such as transporting water from areas ...
Finite Element Modeling of Existing Cracks on Pre-loaded Reinforced Concrete Beams

Sümer, Yusuf; Aktaş, Muharrem (SPRINGER HEIDELBERG, 2014)

The finite element modeling approach for verifying the load deflection behavior of damaged reinforced concrete beams strengthened with fiber-reinforced composites is presented in this study. The existence of cracks in the ...
Finite Element Modeling of Existing Cracks on Pre-Loaded Reinforced Concrete Beams

Sümer, Yusuf; Aktaş, Muharrem (2012)
Flexural strengthening of RC Beams with low-strength concrete using GFRP and CFRP

Sarıbıyık, Ali; Çağlar, Naci (TECHNO-PRESS, 2016)

The Turkish Earthquake Code was revised in 1998 and 2007. Before these Codes, especially 1998, reinforced concrete (RC) beams with low flexural and shear strength were widely used in the building. In this study, the RC ...
Nonlinear finite element analysis of damaged and strengthened reinforced concrete beams

Sümer, Yusuf; Aktaş, Muharrem (2013)
Obtaining a permanent repair by using GFRP in steel plates reformed by heat-treatment

Aydın, Emine; Aktaş, Muharrem (ELSEVIER SCI LTD, 2015)

Applying heat treatment to buckled steel construction elements especially at the time of disaster, are accepted as temporary repairs. This study aims to turn temporary retrofits applied to steel structural elements into ...
The effect of pre-setting pressure applied flexural strength and fracture toughness of reactive powder concrete during the setting phase

İpek, Metin; Yılmaz, Kemalettin; Uysal, Mücteba; İpek, Mediha (ELSEVIER SCI LTD, 2012)

In this study, the effect of pre-setting pressure on reactive powder concrete (RPC) was examined. The fresh (plastic) concrete samples were filled in a specified beam mould and six different pre-setting pressure values ...