An evaluation of some properties of borides deposited on boronized ductile iron

Şen, Uğur; Şen, Şaduman; Yılmaz, Fevzi

DSpace Home
→
Fakülteler / Faculties
→
Mühendislik Fakültesi
→
Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering
→
Makale Koleksiyonu
→
View Item

dc.contributor.authors	Sen, U; Sen, S; Yilmaz, F;
dc.date.accessioned	2020-10-16T11:45:25Z
dc.date.available	2020-10-16T11:45:25Z
dc.date.issued	2004
dc.identifier.citation	Sen, U; Sen, S; Yilmaz, F; (2004). An evaluation of some properties of borides deposited on boronized ductile iron. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 148, 7-1
dc.identifier.issn	0924-0136
dc.identifier.uri	https://doi.org/10.1016/j.jmatprotec.2004.01.015
dc.identifier.uri	https://hdl.handle.net/20.500.12619/70165
dc.description.abstract	In this study, some properties of borided perlitic ductile irons were investigated. Boronizing was realized in a salt bath and appropriate boronizing heat treatment was carried out between under atmospheric pressure. Borides e.g. FeB, Fe2B formed on ductile iron was verified by x-ray diffraction (XRD) analysis, SEM and optical microscope. The distribution of alloying elements was detected by means of energy dispersive x-ray spectroscopy (EDAX) from the surface to the interior. Experimental results revealed that longer boronizing time resulted in thicker boride layers. Optical microscope cross-sectional observation of borided layers showed dentricular morphology. Both hardness and fracture toughness of boronized surfaces were measured via Vickers indenter. The micro-Vickers hardnesses of borides formed on the ductile iron were in the range of 1160-2140 VHN and fracture toughness were in the range of 2.19-4.47 MPa m(1/2). (C) 2004 Elsevier B.V. All rights reserved.
dc.language	English
dc.publisher	ELSEVIER SCIENCE SA
dc.subject	Materials Science
dc.title	An evaluation of some properties of borides deposited on boronized ductile iron
dc.type	Article
dc.identifier.volume	148
dc.identifier.startpage	1
dc.identifier.endpage	7
dc.contributor.department	Sakarya Üniversitesi/Mühendislik Fakültesi/Metalurji Ve Malzeme Mühendisliği Bölümü
dc.contributor.saüauthor	Şen, Uğur
dc.contributor.saüauthor	Şen, Şaduman
dc.contributor.saüauthor	Yılmaz, Fevzi
dc.relation.journal	JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
dc.identifier.wos	WOS:000221488900001
dc.identifier.doi	10.1016/j.jmatprotec.2004.01.015
dc.contributor.author	Şen, Uğur
dc.contributor.author	Şen, Şaduman
dc.contributor.author	Yılmaz, Fevzi