Açık Akademik Arşiv Sistemi

Abrasive wear behaviour of polymeric materials

Show simple item record

dc.contributor.authors Unal, H; Sen, U; Mimaroglu, A;
dc.date.accessioned 2020-10-16T11:44:39Z
dc.date.available 2020-10-16T11:44:39Z
dc.date.issued 2005
dc.identifier.citation Unal, H; Sen, U; Mimaroglu, A; (2005). Abrasive wear behaviour of polymeric materials. MATERIALS & DESIGN, 26, 710-705
dc.identifier.issn 0264-1275
dc.identifier.uri https://doi.org/10.1016/j.matdes.2004.09.004
dc.identifier.uri https://hdl.handle.net/20.500.12619/70124
dc.description.abstract In this study the abrasive wear behaviour of aliphatic polyketone (APK), polyoxymethylene (POM), ultrahigh molecular weight polyethylene (UHMWPE), polyamide 66 (PA66), and 30% glass fibre reinforced polyphenylenesulfide (PPS + 30%GFR) engineering polymers at room temperature were studied. Pin-on disc arrangement wear tests were carried out at 1 m/s test speed and load value of 10 N. Tests were carried out for 50, 100, 150 and 200 m sliding distances. Emery paper grid varying from 150 to 1200 grade were used as an abrasive disc surface. After each test the mass loss of the pin was recorded. Finally the specific wear rates were deduced from wear volume of the pin for test duration distances of 50, 100, 150 and 200 in. The results showed that the highest wear rate is for POM with a value of 8.5 x 10(-4) mm(3)/N m and the lowest wear rate is for UHMWPE with a value of 3.36 x 10(-5) mm(3)/N m. Furthermore, for all materials the wear rate increases linearly with increasing wear duration distance. (C) 2004 Elsevier Ltd. All rights reserved.
dc.language English
dc.publisher ELSEVIER SCI LTD
dc.subject Materials Science
dc.title Abrasive wear behaviour of polymeric materials
dc.type Article
dc.identifier.volume 26
dc.identifier.startpage 705
dc.identifier.endpage 710
dc.contributor.department Sakarya Uygulamalı Bilimler Üniversitesi/Teknoloji Fakültesi/Metalurji Ve Malzeme Mühendisliği Bölümü
dc.contributor.saüauthor Ünal, Hüseyin
dc.contributor.saüauthor Şen, Uğur
dc.contributor.saüauthor Mimaroğlu, Abdullah
dc.relation.journal MATERIALS & DESIGN
dc.identifier.wos WOS:000230472700007
dc.identifier.doi 10.1016/j.matdes.2004.09.004
dc.identifier.eissn 1873-4197
dc.contributor.author Ünal, Hüseyin
dc.contributor.author Şen, Uğur
dc.contributor.author Mimaroğlu, Abdullah


Files in this item

Files Size Format View

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record