The Effect of Samples Geometry and Thermal Cycling Test Type on the Thermal Shock Behaviour of Plasma Sprayed TBCs

Altuncu, Ekrem; Erdoğan, Garip; Üstel, Fatih; Türk, Ahmet

DSpace Home
→
Fakülteler / Faculties
→
Mühendislik Fakültesi
→
Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering
→
Makale Koleksiyonu
→
View Item

dc.contributor.authors	Altuncu, E; Karaali, EI; Erdogan, G; Ustel, F; Turk, A;
dc.date.accessioned	2020-10-16T11:41:26Z
dc.date.available	2020-10-16T11:41:26Z
dc.date.issued	2009
dc.identifier.citation	Altuncu, E; Karaali, EI; Erdogan, G; Ustel, F; Turk, A; (2009). The Effect of Samples Geometry and Thermal Cycling Test Type on the Thermal Shock Behaviour of Plasma Sprayed TBCs. PLASMA PROCESSES AND POLYMERS, 6, S715-S711
dc.identifier.issn	1612-8850
dc.identifier.uri	https://doi.org/10.1002/ppap.200931706
dc.identifier.uri	https://hdl.handle.net/20.500.12619/70018
dc.description.abstract	Thermal barrier coatings (TBCs) are effective in protecting gas turbine blades by insulating them from hot gas passing through. In addition, they provide prevention of thermal shock, oxidation resistance and improved engine efficiency. A major life-limiting weakness of TBCs is their susceptibility to get damaged by thermally-induced stresses. The thermal shock behaviour of TBC systems subjected to thermal shock loading and the influence of the cracks on the coating durability was investigated experimentally. In this study, TBCs (NiCrAlY + YSZ), which have different sample geometry were subjected to both of gas burner and furnace thermal cycle tests. Sample geometry and cycle test type effect on the correlation of thermal shock behaviour of TBC coatings were characterized by macroscopic and microstructural investigations.
dc.language	English
dc.publisher	WILEY-V C H VERLAG GMBH
dc.subject	Polymer Science
dc.title	The Effect of Samples Geometry and Thermal Cycling Test Type on the Thermal Shock Behaviour of Plasma Sprayed TBCs
dc.type	Proceedings Paper
dc.identifier.volume	6
dc.identifier.startpage	S711
dc.identifier.endpage	S715
dc.contributor.department	Sakarya Uygulamalı Bilimler Üniversitesi/Teknoloji Fakültesi/Metalurji Ve Malzeme Mühendisliği Bölümü
dc.contributor.saüauthor	Altuncu, Ekrem
dc.contributor.saüauthor	Erdoğan, Garip
dc.contributor.saüauthor	Üstel, Fatih
dc.contributor.saüauthor	Türk, Ahmet
dc.relation.journal	PLASMA PROCESSES AND POLYMERS
dc.identifier.wos	WOS:000272302900136
dc.identifier.doi	10.1002/ppap.200931706
dc.contributor.author	Altuncu, Ekrem
dc.contributor.author	Erdoğan, Garip
dc.contributor.author	Üstel, Fatih
dc.contributor.author	Türk, Ahmet