The effects of applied load on the coefficient of friction in Cu-MMC brake pad/Al-SiCp MMC brake disc system

Gültekin, Deniz; Uysal, Mehmet; Aslan, Serdar; Güler, Mehmet Oğuz; Akbulut, Hatem; Uysal, Mehmet

DSpace Home
→
Fakülteler / Faculties
→
Mühendislik Fakültesi
→
Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering
→
Makale Koleksiyonu
→
View Item

dc.contributor.authors	Gultekin, D; Uysal, M; Aslan, S; Alaf, M; Guler, MO; Akbulut, H;
dc.date.accessioned	2020-10-16T11:41:04Z
dc.date.available	2020-10-16T11:41:04Z
dc.date.issued	2010
dc.identifier.citation	Gultekin, D; Uysal, M; Aslan, S; Alaf, M; Guler, MO; Akbulut, H; (2010). The effects of applied load on the coefficient of friction in Cu-MMC brake pad/Al-SiCp MMC brake disc system. WEAR, 270, 82-73
dc.identifier.issn	0043-1648
dc.identifier.uri	https://doi.org/10.1016/j.wear.2010.09.001
dc.identifier.uri	https://hdl.handle.net/20.500.12619/70001
dc.description.abstract	In this study the frictional and wear characteristics of sintered copper matrix composite brake pads against cast Al-Si/SiCp brake disc and the effects of applied load on the coefficient of friction have been reported Tribological behavior of Cu-MMC/Al-MMC couple was studied using Pin-on-Disc tribometer The aluminum metal matrix composite material was used as a disc whereas the graphite reinforced copper matrix composite was used as a brake pad Frictional surfaces were investigated using a scanning electron microscope (SEM) equipped with energy-dispersive spectroscopy (EDS) The amount of wear of both brake disc and pad cannot be measured since trace amount of material was transferred These phenomena also proved that the brake disc and the pad have high wear resistance The friction layer on the brake pad s worn surface was confirmed as mostly of carbon and copper oxides (C) 2010 Elsevier B V All rights reserved
dc.language	English
dc.publisher	ELSEVIER SCIENCE SA
dc.subject	Materials Science
dc.title	The effects of applied load on the coefficient of friction in Cu-MMC brake pad/Al-SiCp MMC brake disc system
dc.type	Article
dc.identifier.volume	270
dc.identifier.startpage	73
dc.identifier.endpage	82
dc.contributor.department	Sakarya Üniversitesi/Mühendislik Fakültesi/Metalurji Ve Malzeme Mühendisliği Bölümü
dc.contributor.saüauthor	Gültekin, Deniz
dc.contributor.saüauthor	Uysal, Mehmet
dc.contributor.saüauthor	Aslan, Serdar
dc.contributor.saüauthor	Güler, Mehmet Oğuz
dc.contributor.saüauthor	Akbulut, Hatem
dc.contributor.saüauthor	Uysal, Mehmet
dc.relation.journal	WEAR
dc.identifier.wos	WOS:000285667200009
dc.identifier.doi	10.1016/j.wear.2010.09.001
dc.contributor.author	Gültekin, Deniz
dc.contributor.author	Uysal, Mehmet
dc.contributor.author	Aslan, Serdar
dc.contributor.author	Güler, Mehmet Oğuz
dc.contributor.author	Akbulut, Hatem
dc.contributor.author	Uysal, Mehmet