The effect of tin addition on the microstructure and mechanical properties of squeeze cast AM60 alloy

Şevik, Hüseyin; Açıkgöz, Şehzat; Kurnaz, Süleyman Can

DSpace Home
→
Fakülteler / Faculties
→
Mühendislik Fakültesi
→
Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering
→
Makale Koleksiyonu
→
View Item

dc.contributor.authors	Sevik, H; Acikgoz, S; Kurnaz, SC;
dc.date.accessioned	2020-10-16T11:41:04Z
dc.date.available	2020-10-16T11:41:04Z
dc.date.issued	2010
dc.identifier.citation	Sevik, H; Acikgoz, S; Kurnaz, SC; (2010). The effect of tin addition on the microstructure and mechanical properties of squeeze cast AM60 alloy. JOURNAL OF ALLOYS AND COMPOUNDS, 508, 114-110
dc.identifier.issn	0925-8388
dc.identifier.uri	https://doi.org/10.1016/j.jallcom.2010.07.185
dc.identifier.uri	https://hdl.handle.net/20.500.12619/69998
dc.description.abstract	In this study, the effect of tin addition (0, 0.5,1, 2 and 4 wt% Sn) on the microstructure and mechanical properties of a magnesium-based alloy (AM60) were investigated. The alloys were produced under a controlled atmosphere by a squeeze-casting process. The results indicated that Sn addition effectively decreased the dimension of eutectic phase region on the grain boundary. The hardness value of AM60 alloy increased with the increment of alloying element ingredients. The tensile testing results indicated that the greatest ultimate tensile strength (UTS) was exhibited by AM60-4 wt% Sn as 212 MPa. The impact strength of AM60 alloy was remarkably increased by 0.5 wt% Sn addition from 16J in initial state to 24J. Having added to this critical weight percentage tin ratio, the impact strength starts to decrease with increasing Sn addition. (C) 2010 Elsevier B.V. All rights reserved.
dc.language	English
dc.publisher	ELSEVIER SCIENCE SA
dc.subject	Metallurgy & Metallurgical Engineering
dc.title	The effect of tin addition on the microstructure and mechanical properties of squeeze cast AM60 alloy
dc.type	Article
dc.identifier.volume	508
dc.identifier.startpage	110
dc.identifier.endpage	114
dc.contributor.department	Sakarya Üniversitesi/Mühendislik Fakültesi/Metalurji Ve Malzeme Mühendisliği Bölümü
dc.contributor.saüauthor	Şevik, Hüseyin
dc.contributor.saüauthor	Açıkgöz, Şehzat
dc.contributor.saüauthor	Kurnaz, Süleyman Can
dc.relation.journal	JOURNAL OF ALLOYS AND COMPOUNDS
dc.identifier.wos	WOS:000283903400023
dc.identifier.doi	10.1016/j.jallcom.2010.07.185
dc.identifier.eissn	1873-4669
dc.contributor.author	Şevik, Hüseyin
dc.contributor.author	Açıkgöz, Şehzat
dc.contributor.author	Kurnaz, Süleyman Can