Sintering Behavior and Machinability Properties of Industrial Waste Materials Based Glass-Ceramics

Bayrak, Günhan; Ercenk, Ediz; Yılmaz, Şenol

DSpace Home
→
Fakülteler / Faculties
→
Mühendislik Fakültesi
→
Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering
→
Makale Koleksiyonu
→
View Item

dc.contributor.authors	Bayrak, G; Ercenk, E; Yilmaz, S;
dc.date.accessioned	2020-10-16T11:10:31Z
dc.date.available	2020-10-16T11:10:31Z
dc.date.issued	2015
dc.identifier.citation	Bayrak, G; Ercenk, E; Yilmaz, S; (2015). Sintering Behavior and Machinability Properties of Industrial Waste Materials Based Glass-Ceramics. ACTA PHYSICA POLONICA A, 127, 1348-1346
dc.identifier.issn	0587-4246
dc.identifier.uri	https://hdl.handle.net/20.500.12619/69861
dc.description.abstract	Glass-ceramics were produced by sintering method from industrial waste materials such as fly ash, blast furnace slag and boron waste. The sintering behavior and machinability of glass-ceramic compositions were investigated. Additives were added to waste materials for enhancement of machinability and sintering properties. All starting materials were mixed by ball milling for 2 h using alumina media. The mixed and milled powders were sieved to grain sizes smaller than 75 mu m and pressed at 100 MPa. The pressed samples were sintered at 900 degrees C, 1000 degrees C and 1100 degrees C for 1 h in an electric furnace using a heating rate of 5 degrees C/min. Some characterization tests such as X-ray diffraction (XRD), scanning electron microscopy (SEM) and machinability tests were performed on sintered samples. The results indicated that all samples exhibit good sintering and machinability properties.
dc.language	English
dc.publisher	POLISH ACAD SCIENCES INST PHYSICS
dc.subject	Physics
dc.title	Sintering Behavior and Machinability Properties of Industrial Waste Materials Based Glass-Ceramics
dc.type	Proceedings Paper
dc.identifier.volume	127
dc.identifier.startpage	1346
dc.identifier.endpage	1348
dc.contributor.department	Sakarya Uygulamalı Bilimler Üniversitesi/Arifiye Meslek Yüksekokulu/Makine Ve Metal Teknolojileri Bölümü
dc.contributor.saüauthor	Bayrak, Günhan
dc.contributor.saüauthor	Ercenk, Ediz
dc.contributor.saüauthor	Yılmaz, Şenol
dc.relation.journal	ACTA PHYSICA POLONICA A
dc.identifier.wos	WOS:000357937100134
dc.identifier.eissn	1898-794X
dc.contributor.author	Bayrak, Günhan
dc.contributor.author	Ercenk, Ediz
dc.contributor.author	Yılmaz, Şenol