The effect of sliding speed on the wear behavior of pulse electro Co-deposited Ni/MWCNT nanocomposite coatings

Hatipoğlu, Gizem; Kartal, Muhammet; Uysal, Mehmet; Çetinkaya, Tuğrul; Akbulut, Hatem

DSpace Home
→
Fakülteler / Faculties
→
Mühendislik Fakültesi
→
Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering
→
Makale Koleksiyonu
→
View Item

dc.contributor.authors	Hatipoglu, G; Kartal, M; Uysal, M; Cetinkaya, T; Akbulut, H;
dc.date.accessioned	2020-10-16T11:09:49Z
dc.date.available	2020-10-16T11:09:49Z
dc.date.issued	2016
dc.identifier.citation	Hatipoglu, G; Kartal, M; Uysal, M; Cetinkaya, T; Akbulut, H; (2016). The effect of sliding speed on the wear behavior of pulse electro Co-deposited Ni/MWCNT nanocomposite coatings. TRIBOLOGY INTERNATIONAL, 98, 73-59
dc.identifier.issn	0301-679X
dc.identifier.uri	https://doi.org/10.1016/j.triboint.2016.02.003
dc.identifier.uri	https://hdl.handle.net/20.500.12619/69811
dc.description.abstract	In this study, Ni/MWCNT nanocomposite coatings were prepared from a modified Watt's type electrolyte by using pulse current (PC) plating technique. The influence of multi walled carbon nanotube (MWCNT) content in the electrolyte on the tribological properties of nanocomposites were tested by using a reciprocating ball-on disk apparatus, sliding against to M50 steel ball (phi 10 mm). Coatings were characterized using Raman spectroscopy, X-ray diffraction (XRD) and scanning electron microscope (SEM) analysis before and after wear testing. Nanocomposite coatings showed wear rate decrease between 1.31 and 1.40 times compared with pure Ni coatings. Friction coefficient decreased from 0.883 for pure Ni coating to 0.419 for the Ni/MWCNT nanocomposite because of graphitization and self lubrication effect of the MWCNTs. (C) 2016 Elsevier Ltd. All rights reserved.
dc.language	English
dc.publisher	ELSEVIER SCI LTD
dc.subject	Engineering
dc.title	The effect of sliding speed on the wear behavior of pulse electro Co-deposited Ni/MWCNT nanocomposite coatings
dc.type	Article
dc.identifier.volume	98
dc.identifier.startpage	59
dc.identifier.endpage	73
dc.contributor.department	Sakarya Üniversitesi/Teknoloji Fakültesi/Metalurji Ve Malzeme Mühendisliği Bölümü
dc.contributor.saüauthor	Hatipoğlu, Gizem
dc.contributor.saüauthor	Kartal, Muhammet
dc.contributor.saüauthor	Uysal, Mehmet
dc.contributor.saüauthor	Çetinkaya, Tuğrul
dc.contributor.saüauthor	Akbulut, Hatem
dc.relation.journal	TRIBOLOGY INTERNATIONAL
dc.identifier.wos	WOS:000374426000007
dc.identifier.doi	10.1016/j.triboint.2016.02.003
dc.identifier.eissn	1879-2464
dc.contributor.author	Hatipoğlu, Gizem
dc.contributor.author	Kartal, Muhammet
dc.contributor.author	Uysal, Mehmet
dc.contributor.author	Çetinkaya, Tuğrul
dc.contributor.author	Akbulut, Hatem