Açık Akademik Arşiv Sistemi

Biomimetric coating of monophasic brushite on Ti6Al4V in new m-5xSBF

Show simple item record

dc.contributor.authors Turk, S; Altinsoy, I; CelebiEfe, G; Ipek, M; Ozacar, M; Bindal, C;
dc.date.accessioned 2020-10-16T11:05:40Z
dc.date.available 2020-10-16T11:05:40Z
dc.date.issued 2018
dc.identifier.citation Turk, S; Altinsoy, I; CelebiEfe, G; Ipek, M; Ozacar, M; Bindal, C; (2018). Biomimetric coating of monophasic brushite on Ti6Al4V in new m-5xSBF. SURFACE & COATINGS TECHNOLOGY, 351, 10-1
dc.identifier.issn 0257-8972
dc.identifier.uri https://doi.org/10.1016/j.surfcoat.2018.07.067
dc.identifier.uri https://hdl.handle.net/20.500.12619/69700
dc.description.abstract Ti6Al4V plates were exposed to soaking alkali treatment resulted in Na0.23TiO2 phase on the surface before realizing biomimetic Calcium-Phosphate (CaP) coating in prepared m-5xSBF and 5xSBF solutions at 37 degrees C and pH 6. The aim of the present study was to examine CaP nucleation on the Ti6Al4V substrate in the new biomimetic medium, which allows the precipitation of uniform and monophasic CaPs coating within 2 days. Characterizations of coated surfaces were performed by SEM and EDX, FESEM, FTIR, Raman and contact angle measurements. Phase formation (Na0.23TiO2, 22-1404; TiO2, 21-1276; CaHPO4(H2O)(2), 72-0713 and Ca-5(PO4)(3)OH, 09-0432), average particle size distribution (0.1 - 1.8 mu m for HA, 0.5 - 4.7 mu m and 10.7 - 239.4 mu m for width and length of Brushite), the specific surface area (85,623 and 1,169,412 m(2) g(-1) for Brushite and HA, respectively) and phase transformations (from brushite to calcium pyrophosphate) of the coated CaP powders on the surface were also examined by XRD, DLS technique, BET, and TGA, respectively. As a result, it has been possible to obtain for the first time monophasic brushite phase coated on Ti6Al4V in m-5xSBF biomimetic medium and monophasic brushite coated surface characterization was compared with hydroxyapatite coated surface obtained in 5xSBF.
dc.language English
dc.publisher ELSEVIER SCIENCE SA
dc.subject Physics
dc.title Biomimetric coating of monophasic brushite on Ti6Al4V in new m-5xSBF
dc.type Article
dc.identifier.volume 351
dc.identifier.startpage 1
dc.identifier.endpage 10
dc.contributor.department Sakarya Üniversitesi/Biyomedikal, Manyetik Ve Yarıiletken Malzemeler Araştırma Merkezi
dc.contributor.saüauthor Türk, Serbülent
dc.contributor.saüauthor Türk, Serbülent
dc.contributor.saüauthor Altınsoy, İbrahim
dc.contributor.saüauthor Çelebi Efe, Gözde Fatma
dc.contributor.saüauthor İpek, Mediha
dc.contributor.saüauthor Özacar, Mahmut
dc.contributor.saüauthor Bindal, Cuma
dc.relation.journal SURFACE & COATINGS TECHNOLOGY
dc.identifier.wos WOS:000447108800001
dc.identifier.doi 10.1016/j.surfcoat.2018.07.067
dc.contributor.author Türk, Serbülent
dc.contributor.author Türk, Serbülent
dc.contributor.author Altınsoy, İbrahim
dc.contributor.author Çelebi Efe, Gözde Fatma
dc.contributor.author İpek, Mediha
dc.contributor.author Özacar, Mahmut
dc.contributor.author Bindal, Cuma


Files in this item

Files Size Format View

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record