DSpace Home
→
Fakülteler / Faculties
→
Mühendislik Fakültesi
→
Metalurji ve Malzeme Mühendisliği / Metallurgy and Materials Engineering
→
Makale Koleksiyonu
→
Browsing Makale Koleksiyonu by Author

Browsing Makale Koleksiyonu by Author "Bindal, Cuma"

Now showing items 1-20 of 97

3D porous collagen/functionalized multiwalled carbon nanotube/chitosan/hydroxyapatite composite scaffolds for bone tissue engineering

Türk, Serbülent; Altınsoy, İbrahim; Çelebi Efe, Gözde Fatma; İpek, Mümtaz; Özacar, Mahmut; Bindal, Cuma (ELSEVIER SCIENCE BV, 2018)

In this study, we describe new collagen/functionalized multiwalled carbon nanotube/chitosan/hydroxyapatite (Col/f-MWCNT/CS/HA) composite scaffolds which were fabricated by freezing ( - 40 degrees C at 0.9 degrees C/min) ...
3D porous collagen/functionalized multiwalled carbon nanotube/chitosan/hydroxyapatite composite scaffolds for bone tissue engineering

Türk, Serbülent; Altınsoy, İbrahim; Çelebi Efe, Gözde Fatma; İpek, Mümtaz; Özacar, Mahmut; Bindal, Cuma (ELSEVIER SCIENCE BV, 2018)

In this study, we describe new collagen/functionalized multiwalled carbon nanotube/chitosan/hydroxyapatite (Col/f-MWCNT/CS/HA) composite scaffolds which were fabricated by freezing ( - 40 degrees C at 0.9 degrees C/min) ...
A comparative study of borided pure niobium, tungsten and chromium

Özbek, İbrahim; Bindal, Cuma (PERGAMON-ELSEVIER SCIENCE LTD, 2006)

Pure niobium (Nb), tungsten (W) and chromium (Cr) were boronized at 940 degrees C for 2, 4 and 8h. The borided samples were characterized by X-ray diffraction, Scanning electron microscope and microhardness tests. Tribological ...
A comparative study of borided pure niobium, tungsten and chromium

Bindal, Cuma; Özbek, İbrahim (2006)
A comparison of borided AISI 316L and AISI 304 stainless steels

Özbek, İbrahim; Bindal, Cuma (2002)
A comparison of borides formed on AISI 1040 and AISI P20 steels

İpek, Mediha; Çelebi Efe, Gözde Fatma; Özdemir, Özkan; Bindal, Cuma; Cömert, Hüseyin (ELSEVIER SCI LTD, 2007)

In this study, some properties of borides formed on the AISI 1040 and AISI P20 steel substrates were investigated. Boronizing was performed at 800, 875, and 950 degrees C for 2, 4, 6, and 8 h by using Ekabor 2 powders. The ...
A comparison of pretreatments on hydroxyapatite formation on Ti by biomimetic method

Türk, Serbülent; Altınsoy, İbrahim; Çelebi Efe, Gözde Fatma; İpek, Mediha; Özacar, Mahmut; Bindal, Cuma (SPRINGER, 2018)

In this study, hydroxyapatite coating on titanium material substrate was successfully performed by using biomimetic method. Titanium plates immersed in 1.5 SBF at pH 7.4 and 37 degrees C were analyzed at the end of the ...
A comparison of pretreatments on hydroxyapatite formation on Ti by biomimetic method

Türk, Serbülent; Altınsoy, İbrahim; Çelebi Efe, Gözde Fatma; İpek, Mediha; Özacar, Mahmut; Bindal, Cuma (SPRINGER, 2018)

In this study, hydroxyapatite coating on titanium material substrate was successfully performed by using biomimetic method. Titanium plates immersed in 1.5 SBF at pH 7.4 and 37 degrees C were analyzed at the end of the ...
A mechanical aspect of borides formed on the AISI 440C stainless-steel

Özbek, İbrahim; Şen, Şaduman; İpek, Mediha; Bindal, Cuma; Zeytin, Sakin (PERGAMON-ELSEVIER SCIENCE LTD, 2004)

In the present study, some properties of borides formed on AISI 440C stainless-steel have been investigated. Boronizing was carried out in a solid medium consisting of EKabor(R) powder at a temperature of 950degreesC for ...
A study on NiAl produced by pressure-assisted combustion synthesis

Özdemir, Özkan; Zeytin, Sakin; Bindal, Cuma (PERGAMON-ELSEVIER SCIENCE LTD, 2009)

The production of intermetallic compound was carried out in an electrical resistance furnace in open air under 150 MPa uniaxial pressure at 1050 degrees C for 1 hour using aluminum powder with 15 mu m size and Carbonyl-nickel ...
A tribological comparison of pure and boronized chromium

Bindal, Cuma (ASME, 2006)

Boronized metals are potential candidate materials for various industrial applications as well as for joint arthroplasty. This is due to their high hardness and corrosion resistance. In the present research, we investigated ...
An approach to kinetic study of borided steels

Şen, Şaduman; Bindal, Cuma (2005)
An approach to kinetic study of borided steels

Şen, Şaduman; Şen, Uğur; Bindal, Cuma (ELSEVIER SCIENCE SA, 2005)

In present study, kinetic studies on borided AISI 5140, AISI 4340 and AISI D2 steels are reported. Steels were borided in a salt bath consisting of borax, boric acid and ferro-silicon between 1073 and 1273 K for 2, 4, 6 ...
An evaluation of Al2O3-ZrO2 composites produced by coprecipitation method

İpek, Mediha; Zeytin, Sakin; Bindal, Cuma (ELSEVIER SCIENCE SA, 2011)

The objective of this work is to produce Al2O3-ZrO2 composite from nano-sized powders processed by coprecipitation method. Al2O3 and mixture of Al2O3 + 10 wt.% ZrO2 precipitated successfully by chemical route from aluminum ...
An evaluation of Al2O3-ZrO2 composites produced by coprecipitation method

İpek, Mediha; Zeytin, Sakin; Bindal, Cuma (2011)
An Evaluation of Cu-B4C Composites Manufactured by Powder Metallurgy

Yener, Tuba; Altınsoy, İbrahim; S. C. Yener; Yener, Şuayb Çağrı; Çelebi Efe, Gözde Fatma; Özbek, İbrahim; Bindal, Cuma (POLISH ACAD SCIENCES INST PHYSICS, 2015)

In this study, the influences of B4C ratios on some mechanical and physical properties such as relative density, microhardness and electrical properties of cold pressed Cu-B4C composites were investigated. Curve fitting ...
An evaluation of human articular cartilage on femoral head

Zeytin, Sakin; İpek, Mediha; Bindal, Cuma (ELSEVIER SCIENCE BV, 2002)

In this study, we investigated stress relaxation behavior of the human articular cartilage on femoral head. Articular cartilage is a white dense connective tissue that covers the bone ends within diarthrodial joints and ...
An investigation of the effect of SiC particle size on Cu-SiC composites

Çelebi Efe, Gözde Fatma; İpek, Mediha; Zeytin, Sakin; Bindal, Cuma (ELSEVIER SCI LTD, 2012)

In this study mechanical properties of copper were enhanced by adding 1 wt.%, 2 wt.%, 3 wt.% and 5 wt.% SiC particles into the matrix. SiC particles of having 1 mu m, 5 mu m and 30 mu m sizes were used as reinforcement. ...
An investigation on boriding kinetics of AISI 316 stainless steel

Özdemir, Özkan; Zeytin, Sakin; Bindal, Cuma (PERGAMON-ELSEVIER SCIENCE LTD, 2008)

Boronizing was performed by using a solid medium of Ekabor powders at 1073, 1148 and 1223 K for 2, 4 and 8 h. After boronizing, the major dominant phase was found to be Fe2B and the minors were CrB and Ni2B. Boride coating ...
Biomimetric coating of monophasic brushite on Ti6Al4V in new m-5xSBF

Türk, Serbülent; Türk, Serbülent; Altınsoy, İbrahim; Çelebi Efe, Gözde Fatma; İpek, Mediha; Özacar, Mahmut; Bindal, Cuma (ELSEVIER SCIENCE SA, 2018)

Ti6Al4V plates were exposed to soaking alkali treatment resulted in Na0.23TiO2 phase on the surface before realizing biomimetic Calcium-Phosphate (CaP) coating in prepared m-5xSBF and 5xSBF solutions at 37 degrees C and ...