- DSpace Home
- →
- Fakülteler / Faculties
- →
- Mühendislik Fakültesi
- →
- Recent submissions
JavaScript is disabled for your browser. Some features of this site may not work without it.
Mühendislik Fakültesi: Recent submissions
Now showing items 381-400 of 2863
-
(POLISH ACAD SCIENCES INST PHYSICS, 2015)In this study, spinel Li4Ti5O12 materials were successfully synthesized by a simple and facile sol-gel process and electroless copper deposition techniques. The characteristics of the as-prepared Li4Ti5O12 and Cu-Li4Ti5O12 ...
-
(EMERALD GROUP PUBLISHING LTD, 2015)Originality/value - There are many reports which deal with the friction and wear performance of the polymers and polymer composites. However, the effect of wollastonite effect on tribological performance of PC has up to ...
-
(SPRINGER INDIA, 2015)Nickel-TiO2 composite coatings were prepared under pulse current conditions by co-deposition of TiO2 particles and nickel from a Watts type bath. The effect of TiO2 particle concentration was studied on microhardness, ...
-
(ELSEVIER SCI LTD, 2015)Electrolytes were prepared with different LiBF4 salt concentrations in the ratio of 2:1 (w/w) Ethylene Carbonate (EC): Dimethyl Carbonate (DMC) solvents. Different LiBF4 concentrations were used in the electrolytes to ...
-
(ELSEVIER SCI LTD, 2015)Reactive powder concrete (RPC) and Slurry Infiltrated Fiber Concrete (SIFCON) are steel fiber-reinforced cement composites which have superior mechanical properties such as compressive, tensile, shear and flexural strength ...
-
(POLISH ACAD SCIENCES INST PHYSICS, 2015)Several reported problems of commercial LiCoO2 electrode materials such as high cost, toxicity, limited rate capability and safety concerns are still remain to be problematic to develop the lithium ion consumer electronics ...
-
(POLISH ACAD SCIENCES INST PHYSICS, 2015)In this study We have in fabrication of in situ metallic.intermetallic Ti-TiAl3 composites from powder mixture containing 40 wt % Ti-Al, 50 wt 7 Ti-Al and 60 wt % Ti-Al by electric current activated sintering method. Powder ...
-
(AUSTRALIAN CERAMIC SOCIETY, 2015)Lustre is defined as "metal-glass nanocomposite thin layer composed by dispersing copper or silver nano particles in silica based glassy matrix". The technique is based on a specific firing of ceramic in a reducing atmosphere ...
-
(POLISH ACAD SCIENCES INST PHYSICS, 2015)In the present study, the production of Fe-Ti-B based alloys was realized and their structure and properties were investigated. Mechanical alloying proceeds by the continual cold welding and fracturing of the constituent ...
-
(POLISH ACAD SCIENCES INST PHYSICS, 2015)The ceramic coating on aluminum alloy was prepared in sodium metasilicate electrolyte by plasma electrolytic oxidation (PEO). The effect of PEO treating time on surface layer was investigated. The morphology and phase ...
-
(WILEY, 2015)Freestanding multiwalled carbon nanotube and titanium (IV) oxide anode paper was prepared by vacuum filtration of multiwall carbon nanotubes/TiO2 hybrid material, which was synthesized by the radio frequency magnetron ...
-
(ELSEVIER SCI LTD, 2015)The aim of this study is to investigate the electromagnetic characterization of ceramic panel produced with natural zeolite via considering the frequency-dependent transmission (T), reflection (R) and absorption (A) ...
-
(ELSEVIER IRELAND LTD, 2015)
-
(POLISH ACAD SCIENCES INST PHYSICS, 2015)Electrolytes based on organic carbonate solvents of ethylene carbonate (EC) and diethyl carbonate (DEC) were prepared by using LiPF6 as the Li-source. Nano sized Al2O3 (50 nm) was used as a reinforcing component in order ...
-
Sintering Behavior and Machinability Properties of Industrial Waste Materials Based Glass-Ceramics (POLISH ACAD SCIENCES INST PHYSICS, 2015)Glass-ceramics were produced by sintering method from industrial waste materials such as fly ash, blast furnace slag and boron waste. The sintering behavior and machinability of glass-ceramic compositions were investigated. ...
-
(POLISH ACAD SCIENCES INST PHYSICS, 2015)In this study, the influences of B4C ratios on some mechanical and physical properties such as relative density, microhardness and electrical properties of cold pressed Cu-B4C composites were investigated. Curve fitting ...
-
(POLISH ACAD SCIENCES INST PHYSICS, 2015)In the present study, the production of Inconel 718 nickel based superalloy was carried out in an electric current activated sintering in open air under a uniaxial pressure of 300 MPa using Al, Ni, Fe, Cr, Ti, Co, Fe-Nb ...
-
(ELSEVIER SCIENCE SA, 2015)Cycling stability of pure tin electrodes was aimed to improve by using suitable combination of nickel and multiwalled carbon nanotubes (MWCNTs). Nanocrystalline Sn-Ni/MWCNT composite was prepared by ultrasonic-pulse ...
-
(TAYLOR & FRANCIS LTD, 2015)Nickel/multiwalled carbon nanotube (MWCNT) metal matrix composite coatings were deposited by pulse electrocodeposition method from a Watt's type electrolyte. The influence of peak current density on the particle codeposition ...
-
(WILEY, 2015)Ferroelectric (Na1/2Bi1/2)TiO3 and its various solid solutions have been drawing special attention as a new candidate for their lead-based counterparts. In this study, therefore, hafnium- or zirconium-doped grain-oriented ...
Now showing items 381-400 of 2863
DSpace@Sakarya by Sakarya University Institutional Repository is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 4.0 Unported License..
DSpace@Sakarya:
